#1021
Рет қаралды 2,351
Күн бұрынEpisode 1021
Lot's of work to clean the board and replace the switches. Looks like cola was spilled on the board (Pepsi Syndrome?) and destroyed some traces.
Be a Patron: / imsaiguy
@bobkozlarekwa2sqq59 2 жыл бұрын
You’re going to keep us in suspense? LOL
@johnwest7993 2 жыл бұрын
That's the good thing about doing a video of taking something apart. You can watch it again when you need to put it back together. A friend did that when he was doing a brake job. It helped a lot.
@RoyAntaw 2 жыл бұрын
Good news and this interesting repair, can't wait to see if this counter will count again.
@727jetjumper 2 жыл бұрын
I like fixing test gear. my last treasure was a Kikusui electronic load. It was dirt cheap, inop but in good condition. I was lucky and all it needed was a $3 MOV. Tested within oem specs w/o any adjustments. :) now I want to find something else. I look forward to seeing your project come to a success!
@IMSAIGuy 2 жыл бұрын
The Kikusui load is a classic. I looked for a cheap one for a long time. I ended up building a DIY one. I'm with you, fixing test equipment is my favorite thing.
@ruhnet 2 жыл бұрын
Shame to have to cover up the cool looking diagonal switch orientation hehe. Thankful you got good news health-wise. :-) 👍
@IMSAIGuy 2 жыл бұрын
It did look nice 😁
@frankowalker4662 2 жыл бұрын
That's a lot of buttons. LOL.
@juanea2eax521 2 жыл бұрын
Good job!
@tono_01 2 жыл бұрын
Hi, where did you order the correct switches? I've got the same device.... and he same issue;-)
@IMSAIGuy 2 жыл бұрын
eBay, you want the 6x6x10mm version.
@tono_01 2 жыл бұрын
@@IMSAIGuy Thanks!
DIYTechTrends
Рет қаралды 6 М.
Learn Electronics Repair
Рет қаралды 1,5 МЛН
Enderestories
Рет қаралды 9 МЛН
GLAZOV
Рет қаралды 63 М.