😫😫 10th Gen Accord Big Brake Kit Install

😫😫 10th Gen Accord Big Brake Kit Install - Making it Work!

Рет қаралды 7,288

Жыл бұрын

Used a set of Genesis Coupe Brembos (any year) and Nissan Rogue (2015-2017, 3 row -- 320mm) rotors, with EBC red stuff. Final spacer size used is 18mm to have it just barely clear the calipers.
Current mods:
Civic Type R Turbo
Tuned by DRob @ IMW
PRL Flex Fuel
PRL Intercooler
PRL Downpipe
PRL Front pipe
Mishimoto Intake
PRL Titanium Inlet
Mishimoto Catch Can
Swift Lowering Springs
Thermal R&D Exhaust
Please like and subscribe if you found this helpful!
Follow my socials!
IG: / qiu_media
TikTok: / qius_car_tips

Пікірлер: 53

@GarrettMedia Жыл бұрын

Good work !! That thumbnail is 🔥 love the new set up

@Makingwaves_123 4 ай бұрын

Need a followup video on this! Planning to do it on my 2.0T sport.

@Loganngo Жыл бұрын

Thats sick!!

@Whitehatch_Checo 4 ай бұрын

Can you make a follow up video on the brakes.

@Fecho00 9 ай бұрын

Tried test fitting my 08 tl type s rotors with these calipers. Didn’t clear at all…. They were basically clamped to where the caliper mounts. Returning those rotors and trying these so I don’t have to use spacers.

@denniswatkins23 Жыл бұрын

Finally a much easier way to get Brembo's on my 2018 Honda Accord.👍 Did you need a centric hub ring for the rotors to fit snuggly?

@Qiu_Media Жыл бұрын

No need, Nissan rogue rotors fit right on :)

@edwardtan4631 Жыл бұрын

@@Qiu_Media so the Nissan Rogue Rotors are centered on the Brembo? I've read that you can also use the 350z rotors.

@Qiu_Media Жыл бұрын

@@edwardtan4631 Nissan Rogue ones are centered. I have also heard 350z ones work but you may need a shim or spacer

@tc3sean Жыл бұрын

This would alleviate the track pad selection for the 2.0L accords for the front, but still has anyone found track pads for the rear of the accord ??

@Qiu_Media Жыл бұрын

I don't know if you're in the Facebook groups, but I recently posted that Type R Rear Pads will fit the accord. Ordered a set of EBC Red Stuffs for a Type R and they had no issues going on, so that opens the door for more compound options (i.e. Blue Stuff from EBC, Hawks)

@mistereti333 Жыл бұрын

How you like them does it really makes a difference? Im looking to do this conversion too. thanks

@raidierg6978 2 ай бұрын

Landing gear stuck?

@huntrusso Жыл бұрын

How centered was the rotor in the caliper? Hearing some mixed reviews on what rotor to run and just want to make sure the rogue rotors are going to work

@Qiu_Media Жыл бұрын

Rogue rotors were perfectly centered, no trimming or shaving.

@huntrusso Жыл бұрын

@@Qiu_Media fantastic! Thank you for the reply

@sergionuno5286 4 ай бұрын

I’m barely seeing this a year later but how is this conversion holding up?

@Qiu_Media 4 ай бұрын

Everything’s been working great with it!

@epselsantiago2748 2 ай бұрын

Which make and model caliper and rotor? Please

@Qiu_Media Ай бұрын

Caliper from any Genesis couple with the brembo package, rotors are off a 3 row Nissan rogue (330mm)

@alextran5978 Жыл бұрын

what size offset for wheels would fit for the brembos?

@Qiu_Media Жыл бұрын

Will depend highly on wheel design. A good starting point is a 9.5 wide with a +35 offset but that does not always guarantee proper fitment since spokes can be more concave

@horllyv6 Жыл бұрын

You need concave wheels to clear brembos with no spacers

@Qiu_Media Жыл бұрын

Yessir, thankfully spacers and a small fender roll made it work. Too lazy to find new wheels lmao

@Stoptechaccord Жыл бұрын

Convex will with a lower offset than stock!Concave u still need 5-10mm since convave spokes bend closer to caliper body!

@djrez2107 Жыл бұрын

i imagine this set up wont clear stock wheels correct?

@Qiu_Media Жыл бұрын

It will with a 25mm spacer

@AlejandroRodriguez-og1kg Жыл бұрын

Would you happen to have the link of the rotors and pads you’ve purchased im soon to acquire a pair of brembos and wanting to piece everything together

@Qiu_Media Жыл бұрын

Rotors used: www.buybrakes.com/raybestos-980638fzn-element3-fusion-coated-disc-brake-rotor Pads used: www.amazon.com/dp/B00PZVTVM2?ref=ppx_pop_mob_ap_share

@AlejandroRodriguez-og1kg Жыл бұрын

@@Qiu_Media thank you so much for the help

@AlejandroRodriguez-og1kg Жыл бұрын

@@Qiu_Media i was curious for the rotors did you use a hub ring or did the rotors fit perfect around the hub

@Qiu_Media Жыл бұрын

@@AlejandroRodriguez-og1kg No hub ring needed, fit just fine on the hub

@AlejandroRodriguez-og1kg Жыл бұрын

Did you have to use the banjo bolt from the genesis callipers or where you able to use the accord oem ones for the brake line

@TheOlaf117 Жыл бұрын

How are those continentals with traction?

@Qiu_Media Жыл бұрын

They’re okay when the temperatures are mild (50-70ish), they’ll spin in the cold (though many tires will too) and in the warm they’ll suffice. If you’re after performance, a dedicated summer tire is better

@carlosjosen Ай бұрын

Does it fit with the stock rims ?

@Qiu_Media Ай бұрын

Stock rims require 25mm spacers

@uzimakiclan7307 Жыл бұрын

Got a link on where you bought the brakes?

@Qiu_Media Жыл бұрын

Off Facebook marketplace, eBay or local is probably best way to grab brembos for cheap. There are services like slickfab that’ll send you a fresh pair of brembos for like 1k, but for that price, I’d recommend 27wons kit. Much thinner 4 pistons that’ll clear wheels easier

@herrerajoe9770 Жыл бұрын

i’m selling some for 530

@Hawaiianswyde808 10 ай бұрын

Where did you get those brakes

@Qiu_Media 10 ай бұрын

From facebook marketplace, they're a rebuilt set someone locally was selling

@turboprodigy Жыл бұрын

What offset was your wheel?

@Qiu_Media Жыл бұрын

The Tesla wheels were I think +40 offset. Don’t remember, ended up selling them for wheels that fit

@azniikka Жыл бұрын

What is the offset of your wheels?

@Qiu_Media Жыл бұрын

+40, with an 19mm spacer and the rotors being another 2-3mm, I'm at +19 or so now

@JobSalazar Жыл бұрын

That’s nice but…spacers can cost damage to your wheels, put weight, pressure. Don’t be surprised in the future…your tires will wiggle…on less you trying to build a race car?