9th Gen Accord Big Brake Kit
Рет қаралды 36,792
Күн бұрынIn this video I finally get my 9th Gen Accord a Big Brake Kit. I show how I installed it and go over the plus and minuses of the kit. Hope you enjoy.
SPACERS:
ebay.to/32m3Bx4
BIG BRAKE KIT:
bit.ly/2ZFzcYz
NEED A CELL PHONE, TABLET or ACTION CAM MOUNT? Check out Tackform for all your mounting solutions. Use my link to help the channel bit.ly/FTATack...
-------------------------------------------------
SUPPORT THE CHANNEL:
CHECK OUT www.bridgemoto... FOR YOU RACING GEAR NEEDS!
Use coupon code FULLTHROTTLEAUTO (all caps when entering it) to get $10 off when you purchase $50 or more.
WANT SOME MERCH?
You can also support Fullthrottle Auto by purchasing Fullthrottle Auto merchandise found here: bit.ly/ShopFTA
USE AMAZON LINK TO HELP THE CHANNEL: bit.ly/Fullthr...
Support Fullthrottle Auto by shopping on EnjukuRacing for your car performance needs by using this link: enjukuracing.co... , it does not cost you anything extra but helps the channel.
THIS ALSO HELPS!
Make sure to Subscribe so you do not miss out on any future videos
like this or anything that might have some automotive fun in it.
THE ENERGY DRINK (ROGUE ENERGY) OF FULLTHROTTLE AUTO:
bit.ly/2ITHDaP
COUPON CODE: FULLTHROTTLEAUTO
Check out my other channel:
/ t3gtech
-----------------------------------------------
SOCIAL MEDIA:
Instagram
/ fullthrottle_auto
Facebook
/ fullthrottlea
Wheelwell
bit.ly/1SmICl7
-----------------------------------------------
EQUIPMENT I USE:
CANON M50: amzn.to/30l6Rut
GOPRO HERO 8: amzn.to/2Ph1lT3
ZOOM H1 MIC: amzn.to/2DsA6lL
SD CARD FOR M50: amzn.to/30izng8
SD CARD FOR GOPRO HERO 8: amzn.to/3k1obMM
-------------------------
Music:
-------------------------
1ST SONG:
Track: Lost Sky - Vision [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Lost Sky - Vision | Du...
Free Download / Stream: ncs.io/VisionID
2ND SONG:
Track: Last Heroes - Dimensions [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Last Heroes - Dimensio...
Free Download / Stream: ncs.io/Dimensio...
3RD SONG:
OOYY - Pink Mirrors
play.google.co...
-------------------------
#fullthrottleauto #FTA #9thGenAccord
@FULLTHROTTLEAUTO 5 жыл бұрын
Are you considering the BBK for your Accord? Also, anyone stay till the end?
@lexsemenenko Жыл бұрын
My 2013 V6 badly needs better breaks the way I use it
@yihengli4008 4 жыл бұрын
FOR REAL, you can't believe how hard it is to find someone who does KZfaq for 9th accord, and tells that much detail. Great video!!!
@FULLTHROTTLEAUTO 4 жыл бұрын
Thanks a lot! I am happy to hear that the video helped. Thanks for watching and commenting.
@yihengli4008 4 жыл бұрын
Fullthrottle Auto keep it up! Definitely wanna see more of your work.
@FULLTHROTTLEAUTO 4 жыл бұрын
@@yihengli4008 thank you again! I got an oil catch can video coming up next for the Honda. I know I had requests on that as well so I figured its time to get that done. Should be up in about 2 weeks.
@yihengli4008 4 жыл бұрын
@@FULLTHROTTLEAUTO Nice
@Looking4TravelingWelderJob 2 жыл бұрын
I agree.
@mikek5206 Жыл бұрын
"AMS oil" lol, first time hearing that one. 😆
@FULLTHROTTLEAUTO Жыл бұрын
😂🤣 Usually I say it as a name all together "amsoil" during this time I thought maybe it wasn't actually amsoil but AMS oil. Thanks for watching and commenting.
@stevegarcia723 5 жыл бұрын
Bro those are some sexy calipers. Just installed some Tein coilovers on my 9th gen and I think the BBK is the next upgrade. Keep up with the great content.
@FULLTHROTTLEAUTO 5 жыл бұрын
Thanks a lot! I hear the Tein's are the favorite for our cars. We'll see if my choice was a good one.
@stevegarcia723 5 жыл бұрын
Fullthrottle Auto for sure. This was my first coilover purchase. So far so good. I had a heck of time getting the struts out. Fronts were the biggest pain, rears weren’t too bad. Took me about 8 hours total, and this was with a full set of tools and just me doing the work. All set to the Tein specs for the car, both for height and ride firmness. I went with the Street Advance Zs. Looking forward to seeing your setup.
@T3GMedia 5 жыл бұрын
Great video! Glad you were able to finally get them working. Mad stopping power.
@CircuitdenateRacing 5 жыл бұрын
Nice job man love the how the new calipers look Got Some serious stopping power now 💪💪💪
@FULLTHROTTLEAUTO 5 жыл бұрын
Thanks bud!!!! You were right, those DTC 30s were not good. Next time I'll pick up 60s or 70s.
@maverickmacleod7381 4 жыл бұрын
very informative i like the layout of your videos and your camera angles! Keep it up!
@FULLTHROTTLEAUTO 4 жыл бұрын
Thanks a lot! Truly appreciate that! Thank you for watching and commenting.
@romendiolaaccords2319 3 жыл бұрын
Great vid ! Good information!
@FULLTHROTTLEAUTO 3 жыл бұрын
Thank you! Thank you for watching and commenting!
@TonyhatesLego11031people 4 жыл бұрын
damn this guy does a whole break kit in under 5min. This would take me 5 hours lmao
@FULLTHROTTLEAUTO 4 жыл бұрын
😂 I wish. Nah, it took about a hour maybe hour and a half. Was pretty quick though
@dennischiu6423 Жыл бұрын
Got it. I'll get the real stuff.
@FULLTHROTTLEAUTO Жыл бұрын
Great to hear. Thanks for watching and commenting.
@KarniToTheKaz 3 жыл бұрын
Been a year, have you uploaded an update video talking about your brakes? Edit: just saw your mid video montage of you driving around in the accord. Wicked montage man.
@FULLTHROTTLEAUTO 3 жыл бұрын
Thank you! I just released an update video of me showing some stuff with the BBK. I have replaced the pads since I got the brakes because I destroyed the pads on the track. But outside of what's in the new vlog that's all the updates I have.
@KarniToTheKaz 3 жыл бұрын
Fullthrottle Auto ohhh that’s what BBK stands for yeah hahaha. I watched it yesterday but was going for the oil catch can and the drive at the end. Didn’t watch the whole thing. I sure will when I have extra time 🙏
@ian6235 3 жыл бұрын
Thanks for info
@FULLTHROTTLEAUTO 3 жыл бұрын
Thanks for watching and commenting.
@jesusrodriquez1799 Жыл бұрын
Omg sick asf !!
@FULLTHROTTLEAUTO Жыл бұрын
Glad you like it! Thanks a lot for watching and commenting.
@tavaresscott1957 4 жыл бұрын
I have a 2017 Honda Accord sport se,lowered on BC racing coilovers with borla axel back exhaust and thinking abt doing this BBK next
@FULLTHROTTLEAUTO 4 жыл бұрын
Stopping is crucial, I'd recommend any BBK you can get that works on this car, just make sure to improve it. Thanks for watching and commenting.
@tavaresscott1957 4 жыл бұрын
Fullthrottle Auto keep making accord content my guy 🙏
@FULLTHROTTLEAUTO 4 жыл бұрын
@@tavaresscott1957 thanks! Will do.
@alexander20972 11 ай бұрын
do you know if these big brake calipers fit the Honda accord coupe 9th Gen?
@FULLTHROTTLEAUTO 11 ай бұрын
They do, yes. Thanks for watching and commenting.
@BlackFoxx17 4 жыл бұрын
nice video , very helpful thank you
@FULLTHROTTLEAUTO 4 жыл бұрын
I am happy to hear it was helpful! Thank you for watching and commenting. 🙏
@iandubria6906 4 жыл бұрын
I want this to my 2016 Camry v6
@FULLTHROTTLEAUTO 4 жыл бұрын
I hear ya. Custom bolt on stuff is hard to find for these kind of cars. Try contacting R1concepts to see if they can do a BBK for you. They offer their own BBK options for different cars. I'm sure it won't be as cheap as this kit but it could be an option. Thanks for watching and commenting.
@minhnguyen96 2 жыл бұрын
the big brake kit link isnt working!!! i would love to buy it thru your link and support your channel!
@FULLTHROTTLEAUTO 2 жыл бұрын
I just clicked on the link and appears to be working fine. However I do not have an affiliate link with this person. If you do end up purchasing from them all I ask is you let them know this video sent you to them. It looks like the first link for the spacers is not working. Try this link once more please bit.ly/2ZFzcYz it definitely should work. I truly appreciate your support. Thank you for watching and commenting.
@marcussiew3019 Жыл бұрын
Did you purchase the rotors when customizing the calipers? Or did you just buy the calipers and order different rotors
@FULLTHROTTLEAUTO Жыл бұрын
I bought everything at once from the person that sells the calipers. So calipers, rotors, pads, and lines all purchased when purchasing the kit. After that I order pads and rotors on my own from different websites. Hope that helps. Thanks for watching and commenting.
@PatrickAntiArrhythmicKerce 2 жыл бұрын
So, the Hyundai caliper bolts onto the Accord hub with a special bolt? Kit doesn't even require an adapter to use the Hyundai caliper?
@FULLTHROTTLEAUTO 2 жыл бұрын
No, you don't need any adapters, it mounts directly to the hub. As for a special bolt, there's nothing special about it. It's just a bolt that works with the hub and caliper.
@turnerspeed 24 күн бұрын
Do these brakes fit on 8th gen sedan?
@FULLTHROTTLEAUTO 24 күн бұрын
@@turnerspeed from what I'm aware, they do yes. Thanks for watching and commenting.
@jackpepkowski4083 4 жыл бұрын
Did you change to stainless steel brake lines? I feel like you need to do that when upgrading to bigger brakes.
@FULLTHROTTLEAUTO 4 жыл бұрын
Great question. I already had stainless lines. The ones that you get for the stock calipers work with these. If you don't have stainless then I do recommend getting them.
@vincedcisthename4621 8 ай бұрын
Will this work on the 9th gen coupe?
@FULLTHROTTLEAUTO 8 ай бұрын
Yes. Thanks for watching and commenting.
@ruymenezes4940 Жыл бұрын
Does it fit on 2008 accord V6?
@FULLTHROTTLEAUTO Жыл бұрын
According to what I'm seeing online from sources looks like it will work on any accord from 1998-2023. Thanks for watching and commenting.
@dennischiu6423 Жыл бұрын
I'm unable to find the link? Where's the description? Do the company still exist? Help plz.
@FULLTHROTTLEAUTO Жыл бұрын
The link is in the description, it's the second link. But here it is again bit.ly/2ZFzcYz Yes the company still exists. Thanks for watching and commenting.
@dennischiu6423 Жыл бұрын
Thank you.
@marlonscontreras665 2 жыл бұрын
Did u get all 4 spacers?
@FULLTHROTTLEAUTO 2 жыл бұрын
At that time, no. I just did the fronts for the clearance. But since then I have gotten new wheels with proper specs/setup to not run spacers. They are a square setup. You can find the video in the Accord playlist. Thanks for watching and commenting.
@gavriel4137 4 жыл бұрын
Great video I have a 2012 Honda Accord with the RL brakes with attachment bracket from fast breaks and my brake pads do not sit flush with the rotors, breaking amazing when new. but after a year or so it started to shake when I break. I was thinking to try this break kid but don't know since they don't sit flush as you explained it do you have a picture you could show me how the brakes sit in on the rotor with the pads.
@FULLTHROTTLEAUTO 4 жыл бұрын
I'll do a vlog where I show that off and go over some other things. I'll let you know when I release it. Since I'll be doing some maintenance on the car this weekend hopefully. Thanks for watching and commenting.
@FULLTHROTTLEAUTO 4 жыл бұрын
The shaking could also be the pads. What pads you use with the car?
@gavriel4137 4 жыл бұрын
@@FULLTHROTTLEAUTO pads I used AkebonoACT1091
@FULLTHROTTLEAUTO 4 жыл бұрын
@@gavriel4137 I looked them up they do seem like good pads. I'll definitely make the vlog to show how the pads sit so you can compare.
@jaisarawan711 4 жыл бұрын
These are the calipers from 2010 genesis coupe 3.8?
@FULLTHROTTLEAUTO 4 жыл бұрын
The 3.8 and the 2.0T Brembos are the same. But yes that would be correct. Thanks for watching.
@karlosmejia4872 3 жыл бұрын
those look awesome. can you provide a link to where I can get these.
@FULLTHROTTLEAUTO 3 жыл бұрын
The link is in the description. Thanks a lot for watching and commenting.
@n8dizzel4shizzel 10 ай бұрын
Anything available for the 10th get accord?
@FULLTHROTTLEAUTO 10 ай бұрын
From what I understand this same kit works for the 10th Gen, actually it works for any Accord that's 5-lug all from 1998-2023. Hope that helps. Thanks for watching and commenting.
@n8dizzel4shizzel 10 ай бұрын
@@FULLTHROTTLEAUTO I really hope so because the factory brakes on the 10th are extremely weak and fade and warp very quickly
@FULLTHROTTLEAUTO 10 ай бұрын
@@n8dizzel4shizzel so are the 9th Gen. Weak that is from factory.
@4getfull89 3 жыл бұрын
Could you tell me what is the spacing of the stock calipers where they attach to the knuckle or anyone else that knows?
@FULLTHROTTLEAUTO 3 жыл бұрын
Unfortunately that's not something I'm use to in doing so I don't have that information. I hope someone that sees the comment can answer this for you. Thanks for watching and commenting.
@betor.9912 2 жыл бұрын
Hello, just one question, how many time did they take to ship your brakes from the moment you made the order??
@FULLTHROTTLEAUTO 2 жыл бұрын
Took about 2-3 weeks. But this was before the pandemic. The pandemic has changed everything. Thanks for watching and commenting.
@wwolf771177 4 жыл бұрын
Acura RL uses advics calipers. I wanna try the 2005 TL which is real brembo...I like what you have now because of the direct bolt on but like I said imma try the brembos... I'm sure I'll need a spacer. I'm running 18" 8.5 with +35 offset. I already need a spacer for my setup. Thanks for the info
@wwolf771177 4 жыл бұрын
It looks like a Acura TL brake. What model kia/Hyundai does that come off of?
@FULLTHROTTLEAUTO 4 жыл бұрын
@@wwolf771177 these brembos were used a bunch of different vehicles from what I understand. This particular set is from a Hyundai Genesis Coupe Brembo model. Both the 4 cyl and 6 cyl versions use the same brembos thanks for watching and commenting
@matthewfrancis836 4 жыл бұрын
Nice video, but The DTC-60’s pad isn’t somthing recommend for anything less then a Full time attack set up I had a set for about 2 weeks & both rotors & pads were done. Again just my opinion on those pads on a 3,000lbs FF chassis
@FULLTHROTTLEAUTO 4 жыл бұрын
I definitely hear that. However my recommendation on those pads is mainly if you are doing a track day. The ones that I had could barely keep up the 2 days for Track Day Picnic. I definitely recommend replacing the DTC-60s with a daily set.
@moonpigeon 3 жыл бұрын
Would the genesis kit work for the rear? Thats my weakspot is the single stack rears
@FULLTHROTTLEAUTO 3 жыл бұрын
Great question. I am not sure. That is something I would have to direct you to either Heeltoe.com or slickfab to see if they might know the answer to that. I also wish there was an easy upgrade for the rears just like the front has. I might do a R1concepts rear big brake upgrade at some point, but we will see if that happens anytime soon. Thanks for watching and commenting.
@alejandroalex6737 3 жыл бұрын
Hey what about a 2016 acura tlx? Do you think these can bolt on to it?
@FULLTHROTTLEAUTO 3 жыл бұрын
From what I understand, the suspension/hub assembly are very similar between the Accord and TLX, so if I were to assume I would say yes. But I can't guarantee that. I'd contact a company that provides these kits to see if they can confirm that. Thanks for watching and commenting.
@russellandrews7410 Жыл бұрын
What exacted Drill slotted rotors you get and where online. Just wanted to make sure to buy the correct one
@FULLTHROTTLEAUTO Жыл бұрын
They're slotted only. These were from R1Concepts. You have to get Rotors that are for the Nissan Rogue with Third Row Seating.
@DRIVER0051 4 жыл бұрын
What's the break in period for the pads?
@FULLTHROTTLEAUTO 4 жыл бұрын
For Hawk performance pads it's extremely fast. This link www.hawkperformance.com/how-to has the how to for all their pads.
@alexnderjb6705 2 жыл бұрын
do you think that this will work for a 2010 accord? v6
@FULLTHROTTLEAUTO 2 жыл бұрын
Yes, it should work on a 2010 V6 Accord. Thanks for watching and commenting.
@gustavoponce5190 4 жыл бұрын
Sorry to ask but will this work on a 2012 honda accord iam asking for a friend looking into this
@FULLTHROTTLEAUTO 4 жыл бұрын
Not a problem at all. Not that I am aware of. You can try going to Slickfab website linked in the description and contacting them to see if it's possible. Thanks for watching and commenting.
@gustavoponce5190 4 жыл бұрын
Thanks man
@rubenfabela9285 4 жыл бұрын
Wouldn’t the RL conversion with the Advics (calipers) BBK needs the RL rotors and not the 350Z rotors??? I’m in the process of getting this done as we speak. Ordered 05-12 RL rotors from R1
@FULLTHROTTLEAUTO 4 жыл бұрын
From what I looked up the RL system uses 350z rotors. 350z that had the Brembos
@anthonyalbitre4513 9 ай бұрын
The RL hub bore and wheel pattern isn't the same, so it won't work
@zadeanrobinson1608 3 жыл бұрын
Try the turbo make by slickfab
@FULLTHROTTLEAUTO 3 жыл бұрын
Originally that is what I was thinking. I might try to build my own kit. We will see what I do. Thanks for watching and commenting.
@zadeanrobinson1608 3 жыл бұрын
@@FULLTHROTTLEAUTO your the best man. We appreciate the 9th Gen performance upgrade content. Literally no one else investing time on doing this.
@FULLTHROTTLEAUTO 3 жыл бұрын
@@zadeanrobinson1608 thank you 🙏 truly appreciate it.
@all-starproduction5672 4 жыл бұрын
How much space do you need from your calipers? because you said it did not fit. I currently have a 20x8.5 36+ wheels just curious
@FULLTHROTTLEAUTO 4 жыл бұрын
What I know fits for sure on a 18 is a +25. I made a video on this with the new wheels found here kzfaq.info/get/bejne/grOhe8qn1Z2RdZs.html Thanks for watching and commenting.
@emeraldjoy92 4 жыл бұрын
Are these the calipers on a Genesis Turbo Coupe (2010)? brand of the rotors or from what car, please????
@FULLTHROTTLEAUTO 4 жыл бұрын
The rotors are for a 2015 Rogue with 3rd row seating. They are R1Concept rotors. The calipers are from a Genesis coupe turbo or 6 cylinder that had the Brembo package. And the pads are for those calipers you would get if you had the Hyundai. I also mention this at the end of the video.
@benjamieson5626 3 жыл бұрын
What year and model Hyundai are the calipers from to order more pads?
@FULLTHROTTLEAUTO 3 жыл бұрын
Any v6 genesis coupe with brembo package. All the years were the same.
@mart182003 4 жыл бұрын
What car do these brembo calipers originally come off?
@FULLTHROTTLEAUTO 4 жыл бұрын
They are the Hyundai Genesis coupe Brembos.
@ZeusTheLightingGod 4 жыл бұрын
Did u do all 4 tires or just fronts
@FULLTHROTTLEAUTO 4 жыл бұрын
Just the fronts
@herc1319 4 жыл бұрын
So it comes with the whole front and rear set?
@FULLTHROTTLEAUTO 4 жыл бұрын
No. Only the front.
@amg2424 3 жыл бұрын
Will these fit the 10th generation Accord ?
@FULLTHROTTLEAUTO 3 жыл бұрын
According to bit.ly/SlickfabBBK yes they do. Thanks for watching and commenting.
@davidmecha8887 2 жыл бұрын
How much was this kit ?
@FULLTHROTTLEAUTO 2 жыл бұрын
It's been a while so I'm not exactly sure. I think around $1300 or so. Thanks for watching and commenting.
@davidmecha8887 2 жыл бұрын
Hey no problem and thank you for getting back to me . Great content !
@FULLTHROTTLEAUTO 2 жыл бұрын
@@davidmecha8887 thank you!
@MrDannyd9 2 жыл бұрын
Looks like a fail with that much poke in the front… I am interested in a maybe a stock upgrade; something from a bigger model like the Ridgeline or Pilot. Anyone have info on something like that?
@FULLTHROTTLEAUTO 2 жыл бұрын
I completely understand. I wouldn't be surprised if there are other upgrades that don't need as much clearance. Good luck with your search.
@MrDannyd9 2 жыл бұрын
@@FULLTHROTTLEAUTO have you considered over-fenders to deal with the poke, or do you like the style?
@FULLTHROTTLEAUTO 2 жыл бұрын
@@MrDannyd9 I don't have the poke anymore. I have a -2.5 degrees in camber for more performance oriented driving and I did a roll and pull on the fenders. With that there is no more poke.
@gregautomotivation 3 жыл бұрын
Which car is this caliper from?
@FULLTHROTTLEAUTO 3 жыл бұрын
Thanks for commenting. Hyundai Genesis coupe with Brembo Package. Doesn't matter if its the v6 or 4 cylinder.
@bballer151331 4 жыл бұрын
Do the pads sit correctly on the rotor?
@FULLTHROTTLEAUTO 4 жыл бұрын
Like I mention in the video. They overall sit correctly on the rotor. The only little bit is the bottom of the pad that's close to the top hat. It creates the smallest lip on the pad because the pad is just slightly bigger.
@boricuafrican1 3 жыл бұрын
14:00
@Trysumting 3 жыл бұрын
Can this kit be applied to an 15’ Acura tlx ?
@FULLTHROTTLEAUTO 3 жыл бұрын
I would assume it can but I can't say for sure. I recommend contacting the company that I bought this from to see if it can be done. Link is in the description. Thanks for watching and commenting.
@Trysumting 3 жыл бұрын
Appreciate it
@tonyramos4853 3 жыл бұрын
So this calipers bolt right on the Knuckle ?
@FULLTHROTTLEAUTO 3 жыл бұрын
Correct.
@tonyramos4853 3 жыл бұрын
Thanks ill be doing this Conversation on my 2017 accord coupe exl 6speed. Think I could use the oem 17mm bolts? I’m putting this kit together on my own ,since I bought the calipers already
@FULLTHROTTLEAUTO 3 жыл бұрын
@@tonyramos4853 from what I remember it did look like it would work. Thanks for watching and commenting.
@tonyramos4853 3 жыл бұрын
There bro ! You help me out a lot! I was able to purchase my own set of calipers on eBay & rotors & it bolts right up! Thanks keep up the good content.
@ArXalanAli 4 жыл бұрын
anyone bought the bbk from the website he have in description?
@FULLTHROTTLEAUTO 4 жыл бұрын
I hope someone answers you. However the 9th Gen Accord Facebook group has a few people on it that have.
@ArXalanAli 4 жыл бұрын
Fullthrottle Auto what's the Group name ?
@FULLTHROTTLEAUTO 4 жыл бұрын
@@ArXalanAli 9th Gen Accords facebook.com/groups/9thGenAccords
@sweezybreezy9778 4 жыл бұрын
does it come with both front left and right?
@T3GMedia 4 жыл бұрын
...yes. of course they do.
@sweezybreezy9778 4 жыл бұрын
@@T3GMedia what set up are you running in the rear?
@FULLTHROTTLEAUTO 4 жыл бұрын
For the rears I'm just running stock calipers with ebc slotted rotors and HP+ pads from Hawk, with stainless lines.
@Gunfightin 2 жыл бұрын
Basically Kia Stinger brakes on an Accord. So sick
@FULLTHROTTLEAUTO Жыл бұрын
I'm extremely satisfied with them even now. Thanks a lot for watching and commenting!
@n14driver 9 ай бұрын
Do you have stinger brembos on your accord? Did you use 350z calipers aswell?
@Gunfightin 9 ай бұрын
@@n14driver no. But I’ve heard that Kia stinger brakes can bolt on. Which depends on calipers/brake pads, and possibly wheels spacers depending on the wheel clearance
@Gunfightin 9 ай бұрын
@@n14driver Acura TL/RL brembos will work too, may need an adapter for the calipers. But you can definitely upgrade to a big brake kit with Kia stinger rotors.
@rego2551 9 ай бұрын
I live in Australia so stinger brakes might be the way to go as we don't have the genesis coupe or Acura RL calipers available. Also I don't fast brakes will post their adapters to Oz.
@kanhaityme 4 жыл бұрын
Hey really love the video...i bought the brembo brake calipers off a hyundai Genesis 3.8 and I bought the rotors for the Nissan rogue with 3rd row seats...i was wont if there was any other modifications done to the brake calipers than being spray...wanted to know b4 I continued
@kanhaityme 4 жыл бұрын
Correction (I wanted to know)
@FULLTHROTTLEAUTO 4 жыл бұрын
The guy that does it also offers speeder valves for a one person system bleeding, which is something I got as well. And he provided a hub centric ring so the rotor sits properly on the hub. Thanks for watching and commenting.
@kanhaityme 4 жыл бұрын
@@FULLTHROTTLEAUTO thanks for the intel I really appreciate it
@JohnBham79 4 жыл бұрын
Anything to get a video to 11 minutes to get it monetized, right?
@FULLTHROTTLEAUTO 4 жыл бұрын
Not sure what you mean. Are you saying the way I edited the video was due to making sure it gets monetized and gets enough ads on it due to length? If so, let me tell you a secret, my videos can't me monetized since I am under a 1000 subscribers. I just enjoyed the edit on the video. One thing you'll learn about me is I don't care for any algorithm. I make videos that I would watch and enjoy. There are 3 things I focus on. Entertain, Educate, and Inspire. If I can do one of those I'll be happy. If I was concerned about monetization I would make daily videos where all I do is talk to the camera and show you nothing else. That's why I don't make daily videos. Because I don't want to make videos where I'm just talking to the camera and there is nothing more to the video then just that. So if you're saying that I edited this video the way I did for monetization, you'd be wrong. Thanks for watching and commenting.
@T3GMedia 4 жыл бұрын
And to add to that, they don't need to be 11 minutes. That's why you see bullshit channels like "Bright Side" "Five Minute Crafts" and all the other bullshit channels made by TheSoul Publishing to LITERALLY just play the algorithm.
@princepadda4209 2 жыл бұрын
Send me link please buy
@FULLTHROTTLEAUTO 2 жыл бұрын
The link is in the description. Thanks for watching and commenting.
@1zamboni 3 жыл бұрын
These are not made by Brembo.
@FULLTHROTTLEAUTO 3 жыл бұрын
Thanks for the info. Wasn't sure who made the Hyundai calipers, just assumed they were Brembos. Do you know if it was Hyundai who made their own or a different company that made it for them? Thanks for watching and commenting.
@waldynvasquez9335 4 жыл бұрын
So this kit can also directly fit a 10th gen Accord ?
@FULLTHROTTLEAUTO 4 жыл бұрын
Not sure. That depends if Honda changed the setup on the 9th. But if everything is the same then yes.
@marco..m7100 4 жыл бұрын
They direct bold on for 10grn as well .. 2020 accord ..
奧特羅羅 Ultraman
Рет қаралды 6 МЛН
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 280 М.
LegitStreetCars
Рет қаралды 833 М.
Alimbek ULAN
Рет қаралды 13 М.
Khurmatillo
Рет қаралды 1,3 МЛН