Lmao. I was going to say, why am I being scolded? 😂

Agree

Were you get it

Love your video can't understand hardly anything you're saying it's one big echo

Once you go custom anything is possible. Looking into installing a king ranch interior into my intentional 4700lp. Should make it feel way less commercial. It's my daily I want some damn luxury 😂

Lol theyve been stealing dryer lint and dryer money from me. Rascal kids!! 🤬😡😂💀

2016, I don't think he installs them for customers. I believe hes only a fabricator, not an installer.

Gunnar Easley this kit is a joke. Absolutely no air flow. All the “brackets” were off. “More or less”. Definitely less. “If you follow the directions”. There are no directions. E4 motors Zach fixed mine.

Chris Sims Zack is great at this kind of stuff but I definitely would not recommend this kit bc you can do it yourself for a lot let and its better quality

trim lvl doesn't matter unless it's the 11-16 lariat to platinum trim. (because of the camel hump radio) if you want the "platinum" look, just buy the 08-10 lariat or king ranch dash and buy the 11-16 vents, they will fit. then all you have left is to wrap the radio surround in a similar brushed silver to mimic the "platinum" look. or if you want the lariat or king ranch look, stick with the 08-10 dash. full disclosure if you want the 11-16 lariat, king ranch, Harley Davidson, or platinum dash with the camel hump radio they do make kits to help, but (it's been a while since i last checked) i believe that they are just too expensive for what an ipad mini can do for the 08-10 dash's.

you can do anything with your imagination, some grinding and welding. sorry, there are no "kits" available.

I'm curious as well

no. thats why we have to make an adaptor

short answer, too difficult. less of a short answer; if he were to do it, he couldn't either make enough money to warrant the initial investment, or he would have to charge an exorbitant amount of money to make it worth his time and effort that no one could afford them.

sadly, not at the moment. the 17+ are as different to the 99-16, as the 99-16 is to the 92-97. I don't think anyone will make this readily available, and if they do it won't be easy nor priced well. there are some cluster kits for the 99-02 that are almost $800, which at that price can get you a whole front end off of a wrecked/ mechanically totaled or donor truck. IMO start with the front-end swap (08-16) and stay there, cause in parts alone you can buy another truck (depending on the trim lvl of swap you want.) if you've already did that and want to upgrade the interior just be patient and start with Facebook marketplace and look for donor trucks for interiors because if you buy from ebay, you are likely to go broke on shipping alone.

It may be possible in the future, ford still uses the old style cab for the F-650 and 750 and I think they use the newer dash.

yes

mcnastycustomz.com

depends on what you want. 08-16 will fit, but the 08-10 is easier and uses a double din radio. the 11-16 uses a custom camel hump radio that is proprietary to ford and can be modified, but at a great financial cost. probably not too expensive, but a $200 double din radio with apple carplay/ android auto is cheaper, especially when bundled with an 08-10 dash vs a one off custom radio by ford and a newer 11-16 dash.

As far as i know it's the same cab just different interior. Correct me if I'm wrong

@@Shakira_6.0 i agree.

the cab is not the same. front structure is different. firewall is different and the hvac is electric and cannot be swapped

The dual cabs, not the standard cabs. Learned that with the mirrors

the 07-17 expedition does not, at all, have the same body as the 99-02. they have the same body as the 03-06, that swap (body panels only) is possible. but what you are asking for can only be done through a custom tube front chassis.

No. It won’t read it. You need a rebuild cluster meant for it. Different computers are the reason for this

Contact e-4 motors he has the correct cluster for this kit

Find him on Instagram

yes. we sell a bolt on bracket that allows you to bolt the 11-16 nose right onto your 08. $489.99 shipped on our website.

our dash kit for the 08-10 is $379 shipped

@@McNastyCustomz I’m talking about have it all done…. Dashboards, steering wheel, the kit & installation!!!!

It’s plug in play if you get 6.0 dash controls for ac and heater, but you have to use a 08-10 cover for that one part which pops on to a 16 dash

no, buy the rounded 6.0 ac controls bout $60, and it plugs into the factory plugs, mounts the same and fits flush with the new dash.

no, excursions and super-duties only. but you could attempt to dash swap from a newer e-series van to get a similar dash, but i do not think that there is a kit available for that. also i do believe the e-series is more plug and play if you just have the gas versions.

don't exist, sorry.

no

yes

yes it will

I'm trying to put together my 2001 f150 with a 2017 bed 2011 dash and a 1955 front end with 2020 led tail light and a 1945 tailgate with 1977 headlights and a panoramic sunroof and bench seat from a 1925 ford model t... did I miss anything 😕 🤔 oh yeah also cooled/heated seats and if I think of anything else I'll hit you up. Thanks!!

sorry, that requires extreme custom fabrication. no kits available.

@@panisimo77 😂😂😂

John Brooks yes we did it

yes with our kit

Econoline's can only swap from other Econoline's, not Econoline's and super duties.

yes it is..

christiaanajcronje Totally agree, that steering wheel is the worst!

what do you mean by decent? maybe i can help.

yes mcnastycustomz.com

mcnastycustomz.com

he only makes the kit, you have to install it or find someone else. this kit will work for the excursions.

short answer, no. less short answer, yes. if you do all the work because there aren't any brackets available from anyone.

PS obs is 97 and older. 99-16 is the og super-duties. you probably know this, but i don't know if you do or don't. just wanted to make sure i wasn't confusing.

we are expecting some in by the end of the week . unfortunately the pandemic has delayed a lot of our vendors

@@McNastyCustomz there's the number where I can call

Great idea for my biz. Fixerupperco.com Maybe FXR.COM

there is a special dash filler for the std, removes cup holder

he sounds pissed lol

hes from the north, like Jersy or NYC. he can't hear no more because of all the honking and traffic noises. he probably doesn't know he's that loud

boston mass

Hamdan Kreem he’s mad cause the dryer hose actually has air flow. That metal shit box has no flow even on high. E4 motors is the way to go.

The man is hard of hearing so naturally he speaks louder he isn’t angry

well i hate to break it to ya, hes the only one that i know of that does this. and zachary mcfarlin only does the interior but charges government level amount of money to build one, because everything is all hand built buy him.

⁠@@joshuaflowers736how much does Zachary McFarlin charge do yk? I’ve been messaging him a lil about getting some of his parts to finish my 06 kr to 2016 kr/platinum swap but he doesn’t seem to give out pricing.