11 WORST CIRCULAR SAW MISTAKES!! And How To Avoid them...(DON'T DO THESE THINGS! Kickback/Binding)

Рет қаралды 2,856,558

Күн бұрын

Check Out Our FREE GUIDE: 25 Must-Have Carpentry Tools...Under $25 Each!
www.thehonestcarpenter.com/
AFFILIATE TOOL LINKS:
Makita 7-1/4" Circular Saw (Pro Choice):
amzn.to/3bTcRz3
Makita Magnesium 7-1/4" Circular Saw (Different Model):
amzn.to/303P3Ty
Dewalt 7-1/4" Circular Saw:
amzn.to/3qbRb6v
Skilsaw 7-1/4" Lightweight Circular Saw (Pro Choice):
amzn.to/3uX7iIL
Skil 15 amp Circular saw (Great Value!):
amzn.to/2PtF5ZH
CORDLESS MODELS:
Dewalt 20V 7-1/4" Circular Saw (Tool Only!):
amzn.to/3bbLvoC
Makita 6-1/2" Lithium Circular Saw (Tool Only!):
amzn.to/3dY4Sn0
(These are Affiliate Links. When you shop through these links, we receive a small commission at NO EXTRA CHARGE TO YOU.)
==================================
CHECK OUT MY KIDS’ BOOKS ON AMAZON!! DUNGEONWORLD is a funny, fast-paced fantasy series for kids ages 7 and up. (All books are written by me! They’re available below in paperback and ebook.)
ONE HOT SPARK (Dungeonworld #1):
a.co/d/1yFGGBW
THE BIG WHIFF (Dungeonworld #2):
a.co/d/2yyYZRc
BANG THE WAR DRUM (Dungeonworld #3):
a.co/d/cXZJaL7
THE ROYAL MESS (Dungeonworld #4):
a.co/d/jazeVXT
THE GHOUL RANCH (Dungeonworld #5):
a.co/d/bwIOY7Q
I DON’T HAVE SPONSORS, I DON’T USE PATREON. BUT IF YOU’D LIKE TO SUPPORT THE CHANNEL, CONSIDER BUYING A BOOK OR TWO...IT WOULD MEAN THE WORLD TO ME!! :)
===================================
11 WORST CIRCULAR SAW MISTAKES!! And How To Avoid them...(DON'T DO THESE THINGS! Kickback/Binding)
Circular Saws are one of the most useful tools...and one of the most dangerous. This short video from The Honest Carpenter will show you 11 of the worst circular saw mistakes, and how to avoid them!
--Circular saws are as powerful as miter saws, but they're FREEHAND. Controlling this amount of cutting power is extremely important!
11 CIRCULAR SAW MISTAKES:
1. Getting in the cut path--keep all body parts free of the cut path!
2. Binding the blade--don't twist the saw, and don't let the wood close up on the blade. This sill bind the blade causing KICKBACK
3. Failure to prop the cut--make sure you lift your material off of the surface you're cutting on, possibly with scrap prop blocks. This will prevent you from cutting your work surface.
4. Setting the saw blade too deep--never let the circular saw blade more than 1/4" past the bottom of the material you're cutting.
5. Adjust the saw while in motion--don't do this! Don't adjust the depth or bevel while the saw is spinning.
6. Don't retract the saw while it's spinning--let the circular saw wind down before retracting it from a partial cut.
7. Removing the blade guard--pro framers will sometimes remove or pin back their circular saw blade guards. Don't do this!
8. Don't set a saw "blade down"--you're supposed to flip circular saws over when you set them down. This prevents an exposed blade from causing the saw to kickback or run away.
9. Starting up with contact--make sure your circular saw blade is not in contact with wood when you start it up. Pull it back just a bit, then spin up the saw.
10. Cord drag--be careful of you're cord getting hung up on the end of the board when you're pushing the circular saw forward in a cut.
11. Forgetting trigger discipline--keep your finger off the circular saw trigger until you're ready to cut with the saw!
Thanks for watching our 11 WORST CIRCULAR SAW MISTAKEs video!
Be sure to check us out at The Honest Carpenter Website:
www.thehonestcarpenter.com
Also, check out some of our other tool-related videos:
BEST SAW YOU'VE NEVER HEARD OF:
• The BEST SAW You've NE...
USE A MITER SAW LIKE A RADIAL ARM SAW:
• Use A Miter Saw As A R...
IS YOUR LEVEL ACCURATE:
• IS YOUR LEVEL ACCURATE...

Пікірлер: 4 100

@billyandrew 3 жыл бұрын

Having cut off my forefinger at the middle knuckle with a circular saw, but not before it had shredded the flesh off the front and the vibration of the blade wrenching the finger off my hand entirely, I ended up having what remained of the finger glued back on with wire and a series of skin grafts from my inner forearm. I have a a deal of difficulty, all these decades later, in using the finger and cannot close it to complete a fist or full grasp. I had recurring nightmares for over a year, afterwards and, awake, had the sweats just thinking it could have been my whole hand or entire arm I could have cut off. This comment is directed to those who have luckily stumbled upon this channel or this particular post. Listen to this guy! He ain't lying. These things can quite easily kill you, if you don't take precautions, don't keep your wits about you, (even switched off that blade can still bite you!) and don't give it the respect it deserves. Look on it as a psycho. It hasn't killed you yet, but get too relaxed or complacent and it still just might! And, yes, my mind is still cast back to that day _every_ time I pick mine up! Obliged for the time you took to read this diatribe.

@jasonh8043 2 жыл бұрын

B.A. WOW ! It's horrible that happened to you. So very sorry. Hope you are doing ok now.

@pimcramer2569 2 жыл бұрын

Thnx for sharing

@lawrencedavidson6195 2 жыл бұрын

I'm sorry that happened to you. Thanks for sharing and greetings from sunny Jamaica.

@soldatheero 2 жыл бұрын

how did that happen if u dont mind me asking?

@gregoryv.zimansr4031 2 жыл бұрын

I shredded the skin off the palm side of 3 fingers at the first joint of my hand using a tale saw. I was very lucky. I went to the ER and they treated it like it was a burn because there wasn't enough skin to stich back together. The skin grew back but one finger is a little thinner than the others and there is scaring, but they work. It was a very lucky wake up call. THINK TWICE - CUT ONCE

@dpaulsen1 9 ай бұрын

Forget about cutting anything other than paneling or thin plywood ... even 3/4" ply bogs it down a lot even when cutting a very VERY slow path. Probably Works great kzfaq.infoUgkxjpBI8OOeUXib_iT7UomCrQ-uauwZJ62c on drywall but who needs the mess of dust flying everywhere when a knife cut will do. Oh, and the red tab on the guard blocks your view of the cutting line once the blade is fully engaged in a cut.

@chrissy1310 Ай бұрын

Funny pic! peeing in the pool, funny

@JP-su1eg 2 жыл бұрын

As a novice, I cannot thank you enough. Just bought my first circular & I've been so afraid to use it. So, grateful for your pro advice. I can now finally venture on my diy project with the necessary safety precautions you've given.

@TheHonestCarpenter 2 жыл бұрын

Thanks SJ! Be safe-make sure someone is around when you use it!

@JM-iv3up 2 жыл бұрын

I think I'm still afraid too or even more lol. My handy dandy hand saw will do for now. Sore muscles and all.

@DreamSmuggler Жыл бұрын

@@JM-iv3up I'm experienced enough with them to use them confidently, but they still scare me enough to keep me careful. I suggest practising your cuts on either thin or soft wood. I primarily deal with structural pine which is typically really soft wood. It's been great for building up my confidence. Let the saw do the work. No need to push hard. Secure your work piece properly so it can't move around while you're cutting. And take your time

@LafayetteCCurtis Жыл бұрын

If you're not feeling at least a little frightened by your circular saw, you have no business using one to begin with. Some fear is pretty healthy with this thing.

@Glados1080 Жыл бұрын

@@JM-iv3up if you still looking for a saw, I recommend getting a cordless one. They stop within a second or two most of the time, makes it much safe to handle for experienced pros and you're average diyer

@HawkeyeJ14 Жыл бұрын

I work with my tools very infrequently, so I like reviewing these kinds of videos before I start on any project. You're helping me stay safe and professional. Thank you for your time and effort, it does a lot of good!

@TheHonestCarpenter Жыл бұрын

You’ve got the right idea, John-better safe than sorry. Thanks for watching!

@stroys7061 2 жыл бұрын

I’m 72 and an experienced DIYer. I’m totally self taught on all power tools and I still have all my body parts. There was one incident with a chainsaw that I won’t discuss, but I’m ok. I wish I had been told all these tips when I was just starting out. You are doing a great service to guys and gals starting out. 👍🏻👍🏻

@breco1it 2 жыл бұрын

Seconding this (as a fairly new DIYer having to now start the "scary" tools) Thank you HC guy, and thank you Stroys for including us gals in the equation. Made me smile. :-)

@johnboy4067 2 жыл бұрын

It's always easier and less painful to learn from others mistakes , I lost my leg because I was cowboy with a chainsaw

@tonyz6421 2 жыл бұрын

I'm on my own too...have to be careful and think projects out well.

@ugenegareth9339 2 жыл бұрын

if you don't know there's also this chainsaw angle grinder attachment, that seems to be more dangerous and warning to others not to use it 2 Esdras 2: 32 - 100 ''''

@stroys7061 2 жыл бұрын

@@johnboy4067 Sorry to hear that. Hope you’ve recovered.

@dagwood00049 2 жыл бұрын

40 years experience in carpentry. This guy nailed every point. FYI if it has a trigger, treat it like a loaded gun.

@RaviRavi-hr9lm 2 жыл бұрын

I agree

@nickdrumheller7293 2 жыл бұрын

Wish I watched this video before I used mine for the first time. My dad gave me all of his Dewalt 20v tools which included a circular saw. My first time using it was a small project cut just to get a solid piece of wood under our microwave that sits on a bakers rack… it was 100° out and I wanted to be in the shade so my sawhorses were on rocks and uneven heights, I’m a very cautious person and always treat tools with respect they deserve. I’m glad nothing bad happened but man just thinking back to that makes me feel like an idiot and I’ll never again rush the setup of a job when saws are involved

@aprizal17 2 жыл бұрын

I think I should treat my hair sprayer like a loaded gun also

@MrJB8383 2 жыл бұрын

Sounds like there should be a safety switch like in most other power tools, don’t it. So much for the best saw.

@HariSeldon913 2 жыл бұрын

One he didn't put in there that I use: If you aren't using it again for a while, unplug it (doesn't apply to cordless of course).

@tonyo_zhelev Жыл бұрын

This is probably the most important video I've seen on DIY. Many people don't realize the power they hold in their hands and it is so eye opening to see a good safety video. Thank you also for the image of saws kicking and going off. Makes you respect those tools even more.

@PortalFPV Жыл бұрын

I love how you point out treating the trigger just like you would on a firearm. Firearm safety was ingrained into me at a very young age, so I already instinctually treat most triggers this way

@American-Plague 3 жыл бұрын

Always ask yourself "Where are my fingers?" before making a cut. This way, after you make your cut, you won't be asking yourself "WHERE ARE MY FINGERS?!".

@mnmlst1 3 жыл бұрын

that's such a good tip, thank you!

@American-Plague 3 жыл бұрын

@@mnmlst1 😎👍

@grantm6514 3 жыл бұрын

This is similar to something I learned from a cabinet-maker friend. He says before making a cut with a power tool, *look at the blade* , it'll help to get you focused (think De Niro in Deer Hunter: "This is this!"). Sometimes we think muscle memory and familiarity are enough, but they won't always keep us safe if our mind is elsewhere.

@billyandrew 3 жыл бұрын

Unless your glasses fell off. 😂

@aztecwarrior9729 3 жыл бұрын

and where is the cable.

@crsullivan1310 2 жыл бұрын

Ive been a carpenter for 15 plus years and this is by far the best circular saw video ive ever seen, teachers should legit show this in apprenticeship school, its way more thorough then anything they ever showed us back in the day

@hoaacres7084 Жыл бұрын

I couldn't agree more. I had excellent, safety minded shop teachers and this was still better.

@itsshrimpinabag9544 11 ай бұрын

Everyone should learn this, this is the modern version of learning the basic skill of using a hand saw.

@KyleHarrisonRedacted 10 ай бұрын

Genuinely, one of THE most useful videos I’ve seen on this subject. No fluff, gets to the point, and and every bit of it describes why WITH demonstrations, and clear understandable problems, without being talked down too. Extremely well done sir, thank you. The bit about trigger discipline is just.. that’s just the icing on this cake 😎

@TheHonestCarpenter 10 ай бұрын

Thank you, Kyle! 😄

@mrCetus 2 жыл бұрын

Good tips. Here's a couple more tips. If I want squared cuts on 2x's boards, I use a triangle angle guide so I don't have to worry about my cut line. When I cut larger boards, like plywood, I will anchor the board to my work table with clamps and then anchor an aluminum straight edge on the side of my cut line. That way all I have to do is keep the saw rail against the straight edge and, again, not have to worry about guiding the saw with my hand. It's a bit more work, but I get more accurate cuts that way.

@Jizzlewobbwtfcus 6 ай бұрын

REALLY nice tip! I actually bought a Straight Edge Clamp a couple of weeks ago even before I bought my Circular Saw today because it seemed like a great thing to have as I have one rather large piece of wood to cut (about 1m x 4m). All I need now is one of those massive metal triangles which I might check out tomorrow. This beginner REALLY appreciates your input ty : ]

@wildbill23c 2 ай бұрын

The straight edge trick works great, takes a little time to setup, but well worth it I think.

@jerrydumas2384 3 жыл бұрын

Even the most seasoned circular saw pro needs an occasional safety tip reminder. Good video 👍

@TheHonestCarpenter 3 жыл бұрын

Thank you, Jerry! These are the things I have to remind myself of on the jobsite frequently :)

@petesuozzi 3 жыл бұрын

Very good video thanks for the refresher course I’m assuming that you have a separate video for the use of a straight edge.

@colosistvan 2 жыл бұрын

Especially they need it as most simply ignore all safety as they feel like they cannot get hurt

@davidmoran4471 3 жыл бұрын

Disconnect power when changing the blade.

@TheHonestCarpenter 3 жыл бұрын

I should have mentioned it, David. I covered it in my blade-changing video, but just failed to wedge it in here.

@charlieodom9107 3 жыл бұрын

Or remove the battery!!!!

@denniswhite166 3 жыл бұрын

@@charlieodom9107 Spot on!! My only circular saw is battery operated.

@charlieodom9107 3 жыл бұрын

@@denniswhite166 I have come really close to losing body parts a couple times from stupidity and complacency. You get to flipping around a mobile tool and it doesn't take long before you are grabbing at the throttle.

@denniswhite166 3 жыл бұрын

@@charlieodom9107 I'm a 67 yer old wood working newbie and I don't have a table saw because I'm still leery about the safety issues with them, but I might get one in the future. I'm not looking for speed just enjoy making things. I'm a retired welder / metal fabricator. Looking at all the safety videos on woodworking that I can find. I want to be buried at the same time as all my fingers.

@frankroublick2646 Жыл бұрын

I've been framing for a few years now and this is all solid advice. I'm grateful that my first boss went over all of this with me. Most of it is common sense, but learning the fundamentals is a huge part of avoiding injuries. Great video. How about a video like this for angle grinder operation? Metal cutting discs scare the hell out of me to this day despite having used them for years now lol

@dfield1955 11 ай бұрын

never stop fearing these power tools. fear, as in always being aware of the dangers, is important to stay safe.

@imnotmike 7 ай бұрын

Those disks are much safer than a circular saw blade, generally. They typically won't cut you if you accidentally touch one for a moment. My grinder has a safety feature that automatically turns it off if it comes in contact with your skin. It can sense the amount of resistance I guess. They will rip right through your fingernails and into your fingers if you touch them with your fingernails rather than your skin, though. The real thing with those is good safety glasses are an absolute must, and honestly, you need to wear a long sleeve shirt and long pants, because the hot sparks from cutting metal really hurt when they land on you, and you could jump and lose control of the tool because of the pain. And be very careful to not let the metal twist or move while you're working, or it will bind on the disk, and the disk will shatter and send shrapnel everywhere. I've never had this happen, but I saw a friend do this once and it was terrifying. He tried to cut a piece of rebar without securing it and the rebar twisted and shattered the disk. Clamp down whatever you are working on so it can't move.

@lambdaguy77 2 жыл бұрын

Thank you! I go back and watch safety videos like this from time to time to remind myself of what I am doing. It's easy to get used to the same ol-sam ol and forget to be careful. Having a healthy respect for tools is always a great thing! And there are always things I learn! Great vid!

@gregcrawford1523 2 жыл бұрын

I've been a carpenter for 30 years and I have to say, your videos are my go to for refresher safety and general tool/shop tips. Great to see a fellow North Carolinian making excellent and informative videos for all! Thanks!

@bryanlatham4508 2 жыл бұрын

And they say our state is on the low end of the education spectrum; 49 or 48, last I cared to check? Apparently "they" haven't met many of us. We intimidated a friggin HURRICANE. We can do ANYTHING. Including teach idiots like me how to use a simple tool lol

@karennorris7880 2 жыл бұрын

I'm a brand new diy-er and I find these videos to be so helpful. I told my brother I was a little bit intimidated by my circular saw, but so far I've taken every precaution and am making better cuts. Thank you for all the advice!

@alaskanuni 2 жыл бұрын

I plan to buy my first circular saw in a few months. These videos are really good.

@Turtleback8024 2 жыл бұрын

@@alaskanuni Friendly Warning ⚠️ : Once you’ve made your first *good* cut, you’ll never want to put that machine down! You’d literally want to cut everything with it! Including your bread.😄 That’s how excellent a Circular saw is. Only started using mine for the first time a couple of days ago _(having bought it about 3 months ago)_ and I just can’t stop using it!🤓👍🏼

@toriless 2 жыл бұрын

I have refused to get one until I an used to other tools like the Miter Saw, reciprocating saw, jig saw, router (with a table), belt sander, planer, belt sander, Dremel, etc. Only now do I feel I have the built-in safety procedures. It is kind of like washing your hands for at least 20 seconds. It take prolonged discipline to get it ingrained so you do it each time. Using power tools is similar, you get used to following the proper procedure. Yes, it is more complicated but both involve adherence to best practices.

@glennwhite1841 2 жыл бұрын

If you're smart you'll be careful with it your whole life. Get careless and you'll have scars for life. I've got a couple.

@bobbiejofouts1708 2 жыл бұрын

Karen, I can totally relate to fear of the circular saw. I fear it and the table saw. First time I used a circular saw was with supervision, but the wood biinded to the saw, and I learned very quickly how easy it is to lose control of the saw. I think this video is the best one of its type I've seen and will review it several more times.

@videofan006 2 жыл бұрын

BRAVO!!! Spoken like a true PRO - short, clear, to the point and no BS!!!! Thanks, one of the best clips for skill saw safety... BTW, love your channel!

@davidgrinter5938 Жыл бұрын

Bought my first circular saw, and did lots of research to get a good saw but had absolutely no idea of how to use it - ended up having some binding of the blade. I wish I'd seen this video before I tried to use this very powerful tool. No injuries thankfully, but could have been. I'm now extremely careful when using my circular saw, and very grateful for the information you have provided. Thank you and well done !👍

@brendaswann7292 3 жыл бұрын

I am a 67 year old woman that has been a serious DIY’er and This Old House student. So much as I have practiced smart saw handling .... binding a blade has been an issue for me. Thank you for focusing on that issue. So many questions, so little platform, wish you where my neighbour. I am addicted to your channel and wish you much success.🇨🇦👏🏽🥰🇨🇦👏🏽🥰

@RouxRouxRingo 2 жыл бұрын

Canada! Woo!!

@gerrymcintosh4477 2 жыл бұрын

I love a women who can handle a circular saw.

@jamest3552 2 жыл бұрын

@@gerrymcintosh4477 ....and really all the tools.

@sandyw4888 2 жыл бұрын

Me too, Binding and kickback. Since a table saw accident I have been watching safety videos so it never happens again. Whereabouts are you in Canada? I am in Ottawa but most of my DIY has been in Quebec.

@ceciliamatos3288 8 ай бұрын

I am a 69 years old New Yorker who avoids the circular saw as much as possible, using the chop saw as much as possible when I can. But we all know that longer cuts in planks require either a table or circular. Nice to hear of another woman out there in my situation. Although I’m reasonably timid, I am determined! ♥️

@markdjolly 3 жыл бұрын

I honestly cant think of another DIY channel that's as on-point, precise, useful and non BS-y (if that's even a word) as yours. I've been learning so much here, thank you.

@QuantumMechanic_88 3 жыл бұрын

I look at some of the KRAP on TV and shake my head . Ethan needs a slot on DIY TV .

@seymourscagnetti1413 3 жыл бұрын

@@QuantumMechanic_88 SPOT ON BROTHER! HOW ABOUT THIS ONE FROM "MIKE HOLMES":......"TODAY I'M GOING TO CHALLANGE MY CREW TO A ____________ RACE", YOU FILL IN THE BLANK. USUALLY IT'S SOMETHING STUPID LIKE A KITCHEN CABINET DEMOLITION RACE OR SIMILAR TASK. ON ONE EPISODE OF "CABIN MASTERS" THEY ACTUALLY HAD A "MITER SAW RACE" TO SEE WHO COULD CUT THE MOST RAFTER BLOCKING THE FASTEST. THE D.I.Y. NETWORK IS DANGEROUS AT BEST. IF YOU REALLY WANT TO LEARN CARPENTRY FROM ONE OF THE BEST TYPE THIS NAME IN YOUR KZfaq SEARCH BOX: "LARRY HAUN". YOU CAN WATCH HIS VIDEO SERIES CALLED: "THE VERY EFFICIENT CARPENTER". IT IS A COMPANION TO HIS BOOK BY THE SAME NAME.

@Alamyst2011 3 жыл бұрын

@@seymourscagnetti1413 Speed is money.

@zianawind2970 Жыл бұрын

Thanks.. I started working with self taught Gung Ho professionals now... and they were just unarticulated or overall more interested in getting the job done than spending time thoroughly teaching me (I was also to green to learn fast enough) and I ended up with tons of blanks in my head about using tools properly. Having videos and taking my time to absorb the info properly really helps TONS it takes the edge of nerves off and broadens my skills and view of what I’m doing. Having proper basics doesnt really happen until after you get hands on experience yet having videos to rethink about things is awesome help.. also many old timers just forget about basic stuff and that’s really bad but well not all workers are teachers too so it’s very good to have video class available!

@hayukogaming8115 2 жыл бұрын

Thank you! These tips helps me a lot to eliminate the fear of using a circular saw. I am doing this research as I want to start with woodworking. Good job mate!

@philhiggins4922 3 жыл бұрын

I’m 6 mins into this video and have learnt so much already. Thank you, thank you so much for being easy to learn from. Superb video editing to show what you mean, while you are taking about all the various problems. So much easier to understand with this, rather than just being told. Quite superb sir. Thank you from Scotland.

@davidfeinberg5599 3 жыл бұрын

Thank you for posting such a great video, This is also probably my most used woodworking tool. The tips you gave are not just gospel for beginners, but a nice refresher for the experienced carpenter that has gotten a little too comfortable through constant use and repetition. As Chris H mentioned, I went to using sheets of 2" foam board insulation years ago as a backer for cutting. Especially helpful when breaking down large sheets on a floor or even bench top use when using my Makita 3 3/8 small saw (also a huge fan of Makita). Again, really great video and sleep well knowing you saved a lot of fingers and trips to emergency rooms ! !

@missumbrella3135 Ай бұрын

I can't overemphasize how helpful this video is. Thank you!

@KermitForPrez 2 жыл бұрын

As an amateur 30 year DYI saw-user, this was the most concise and helpful safety video I have seen. Nice job!

@Thebowzer221 3 жыл бұрын

Very good advice. I know of someone who had a broken return spring for the guard, never repaired it. Put saw down blade still spinning, it kicked up and cut him across his stomach. Ambulance, hospital stay, and a lesson he never forgot. Me either. Thanks 4 this video.

@cherylthec 3 жыл бұрын

Thank you! I'm trying to learn how to make small wooden boxes from videos since I can't find classes to attend and this is very helpful!

@MsJelsica Жыл бұрын

Honestly the best video I’ve watched in regards to safety and saws. Everyone should be watching this before starting out! I love your whole channel, Thanks so much for your awesome content ⭐️

@dennisw8166 Жыл бұрын

Everything you talked about I've experienced countless times over years, but it is definitely good to hear someone else.

@kimkubena8170 2 жыл бұрын

We are never too old to learn. I really appreciate you young people teaching us older folks about safety and carpentry. It is giving me hope for our Country's future and even more appreciation for the American "Can Do" spirit of do it yourselfers. Thanks for sharing!

@stephenspinelli4265 3 жыл бұрын

Great tips as always. I was taught to drape the cord over my shoulder to keep it from getting in the way.

@mike301ful Жыл бұрын

Thanks so much. You have a no-nonsense, friendly, easy to understand style. It is much appreciated. I plan on watching all your videos.

@frankvasquez1387 Жыл бұрын

This is a wonderful video which you have put together! Hopefully every new DYI newcomer and even experienced carpenters keep this safety tips in practice as I always see many individuals doing exactly the opposite! Keep up the great work and thanks a million for taking the time in helping others! God Bless You!

@doublecomplex4741 2 жыл бұрын

Would be interesting to hear your take on left vs right circular saws! Thanks as always for your quality content :D

@billgrabbe9992 3 жыл бұрын

"Rehearse the cut" is another good tip. Helps you identify things you might run into or trip over.

@tfan1965 10 күн бұрын

Great safety video, I just bought a circular saw but the manual doesn’t really show people how to use it safely so this is just what I needed, thank you

@itsshrimpinabag9544 11 ай бұрын

Thorough, concise, and no cussing! Thank you! Subscribed.

@harleyhawk7959 3 жыл бұрын

I'm almost 70, learned everything you mentioned from having experienced first hand. still have all my fingers from learning from those mistakes.

@micah7469 3 жыл бұрын

Same here except I’m 13

@mastermetalshredder 3 жыл бұрын

There are actually only 10 rules, and you have 10 chances to learn before you have 0 fingers

@robertzverina7181 3 жыл бұрын

Make mistakes first hand, then use other hand.

@laurencecummings6435 3 жыл бұрын

Always remember Lee Van Cleef he loved DIY lost one of his fingers with a saw! Watch close ups in The Good, The Bad and the Ugly duel at Sand Hill Cemetery.

@bandit2602 3 жыл бұрын

I know a 75 year old woman who cut off all fingers on one hand on a table saw. First time trying woodworking. Lesson is get someone to teach you.

@kevinharding2099 3 жыл бұрын

Great advice. # 11 Don’t use a dull blade. #12 Use the correct for the material you are cutting. Thanks.

@christheother9088 3 жыл бұрын

I would rather have a cheap saw and a good blade than a great saw with a cheap blade.

@samuelchamberlain2584 3 жыл бұрын

I burnt out a motor by using a dull blade.

@jonhohensee3258 3 жыл бұрын

Kevin - Use the correct.... ?

@5400bowen 3 жыл бұрын

That’s #12 and #13.

@alfredomarquez9777 3 жыл бұрын

@@christheother9088 Yes... up to a point: a very cheap saw can be bad enough too. I learned the hard way when I bought my first circular saw 30 years ago; it was a "professional line" Black and Decker 7 1/4" that came with a then novel "Piranha" Tungsten Carbide teeth, so the blade was OK quality, but the saw wasn't: The damn saw had too much noise, vibration and the damn blade shaft had too much axial play, so my cuts took a much wider "kerf", so that when ripping a 3/4" plywood 4 ft wide sheet into several narrow shelves, the damn saw "ate" a lot of wood from the too loose shaft dancing side to side. Some days later, the same B&D salesman that sold me that P.O.S. tool, confessed to me that they had just returned from Maryland headquarters, where they were told about the superiority of the german Bosch, Japanese Makita and other several brands over the mediocre B&D models... but too late for me to return it. since then, I learned to buy the best tool AND BLADE instead of trying to "save" money, trashed in lower quality tools.

@specimon Жыл бұрын

I keep coming back to this video every now and then just to re-fresh and make sure I am keeping all of those things in mind every time. Thanks for this very helpful summary video!

@Henry39000 5 ай бұрын

I'm newto wood work and have been a little shy with saws not knowing really how to use them. This was so helpful and makes me feel more confident handling a skilsaw.

@psidvicious 3 жыл бұрын

#12 - Never back up in the cut. 99 out of 100 times, it will bind up and crawl back out of the work towards you. Especially with novice users.

@dagwood00049 2 жыл бұрын

Never cut between saw horses

@shaun8550 2 жыл бұрын

Ethan, it's so great to see young skilled craftsman with knowledge and pride in tools and workmanship.

@harshabugatti 2 жыл бұрын

Your videos are always people friendly. Thanks for the advice - The Real Honest Carpenter

@Lljhgfdsa98 3 ай бұрын

Thank you so much! Professionals taking their time to help DIY:ers is so beautiful!🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾❤️❤️

@wm6204 2 жыл бұрын

Great Vid Ethan, I think you've covered everything. Makita make great tools. They had great ideas in the early 80's with battery drills, then just stopped, and playing catch up since. I've found damp or treated timber can be a problem, sticking and stopping the saw from retracting, and yes, years ago on site, late teens, I cut my saws cable. I caught a telling off from the Foreman, who, after I repaired it, took it away, and did the same thing himself ! I find putting the lead over your shoulder if poss a good move, but not always an option. Thanks for the vid.👍

@ian_snyder 2 жыл бұрын

I love that you show what blade binding looks like, what causes it, and how to avoid it. Love your channel!

@TheHonestCarpenter 2 жыл бұрын

Thank you, Ian! That’s a hard one to capture well on video-but I’m glad I got it for this one 🙂

@verngoossen2020 2 жыл бұрын

Don't try to cut circles with a circler saw===

@ericbaker8807 2 жыл бұрын

New homeowner here, and I just ordered my first circular saw. I thought I'd look up some safety videos just to be careful. Yours is the first one I came across. You shared some excellent tips and insights. I've got some spare 2x4s in the garage. I think the first thing I'll build is a couple of simple, but sturdy sawhorses. That way I can properly clamp whatever I'm cutting. Thanks for the info!

@dfield1955 11 ай бұрын

You are a very good orator, explaining not only what, but why, as in, "dont do x, then what happens if you do. and i like how you get right to the point not wasting our time. cant say enough about your teaching style. great!

@25-8 3 жыл бұрын

Thank you so much for this. I’ve only used the saw in my current work job a few times but plan to buy my own during these tool deals and this has helped.

@dalex2902 3 жыл бұрын

Total saw noob here: I kind of chuckled when you said "First mistake is putting any part of your body in its cut path" because well it seems so obvious to not do that. Why would anyone do that? but then at 2:01 you show how wrapping your fingers under the wood to grip or hold the wood while passing the saw over, is something that I never even thought of and just might have actually done so, thank you for saving my fingers and I will never chuckle ever again.

@raywright2401 3 жыл бұрын

Sorry, first time I ever saw someone put their hand UNDERNEATH a running blade was just NOW. Totally counterintuitive and dangerous but not out of the question for idiots.

@N269 3 жыл бұрын

Maybe that's why so many CSs are right side/edge cut? Most, not all, people are right handed and might, if they didn't think, put their left hand on work piece. Hopefully the shoe is wide enough so fingers can't reach and get under blade? But, you are right, it is obvious not to do that.

@khakicam5400 3 жыл бұрын

He means behind the saw but on the same line as the saw path, so it doesn't run back and cut your ball sack as I was warned as a kid on a job site, "Cause then what use will you be to your wife"

@soujrnr Жыл бұрын

Great tips! Safety is so very important! I have been around power tools all of my life, and my dad taught me many things since he was a master woodworker. Nevertheless, you mentioned a couple of things that my dad never did. He's "old school" in many regards, and things are different now than they were in the late 70s and 80s when I was learning all about power tools with dad. However, safety has always been a big thing for my dad, with the exception of him never wearing hearing protection, and so he's all but deaf now. Anyway, great video! I look forward to watching more!

@sarahkoplin3150 2 жыл бұрын

Thank you! I have completed my first very simple DIY tasks with a circular saw, cutting panels to size for painting, having no previous experience with power tools. Your videos helped keep me safe and informed. And I did receive some in person instruction from a carpenter. That was invaluable. If anyone sees this comment and is a total novice with power tools, it is worth your time and money to have someone sit with you and teach you in person! Then, watch excellent videos like these, again and again, to keep yourself safe and aware. Thanks again. I will always watch a video or ten before picking up my saw or any other power tool.

@lenasmith4895 Жыл бұрын

Where can we find someone to train in person?

@srowe9816 3 жыл бұрын

I just bought my first circular saw, I was so happy to watch this video before using it. Thanks for the great advice :)

@bjoe385 2 жыл бұрын

Another tip, use hearing and eye protection, the sound of these saws is loud enough to cause hearing damage over time. As for eye protection, blindness as a result of an accident whilst using a circular saw is unlikely, it’s near impossible if safety glasses are used.

@stuckinmygarage6220 2 жыл бұрын

#12. 👍

@contestwill1556 2 жыл бұрын

hearing protection is very underrated

@RafisStudio 2 жыл бұрын

And wear an N95 mask so you don't inhale the dust.

@davorzmaj753 2 жыл бұрын

I'm pretty new to circular saws (one smallish project under my belt). I set a rule for myself when I first got the thing home from the store: the saw is only plugged in while I have my protective glasses on. If I want to remove them for some reason, I unplug the saw first. That little ritual helped me to avoid accidentally making cuts without the eye protection in place. In fact, if I'm doing a bit of work that doesn't require sawing (e.g. measuring, aligning, clamping), I unplug first. Not a precaution I can see pros taking -- but then, they use the tool enough to hopefully ingrain safety practices. As an occasional hobbiest user, I don't, so I have to think them through each time -- and for me, time isn't money, so I can afford the time cost of the extra "ceremony".

@davidmaunder2270 Жыл бұрын

Brilliant video, direct straight talking, to the point without unnecessary waffle.

@JPSolensky Жыл бұрын

Using scrap wood to support the cut line is great but I switched to using 1" foam since I rip a lot of plywood stock. Just set the blade depth and go. Loved all the tips. Thank goodness the carpenter that taught me practiced most of these and taught them to me. Great video!

@hoaacres7084 Жыл бұрын

I'd be curious how that treats your blades. Foam can be quite hard on metal oddly enough.

@Shananana99 3 жыл бұрын

Thanks for tips! I just recently got up the courage to use my husbands ooooold skilsaw. He just bought us the same Makita as you have and wow, what a difference, love it.

@iuaislamf 9 ай бұрын

Excellent. Have been using circular saws for decades and am embarrassed that I’ve been doing so many things the wrong and dangerous way. Can’t thank you enough. 👏

@fromtheresearchchair4888 Жыл бұрын

Your videos are very helpful and show, not just your skill, but also your thoughtfulness. Well done!

@andrewgrant3023 Жыл бұрын

Great video, very useful content for newbies and the more experienced. OThere is also another reason for not allowing too much blade to hang below the cut. If the end of the blade guard is too low it won't lift on the edge of the piece, but will slide below instead and suddenly you wonder why you can't push the saw forward anymore and you might well twist the blade and ruin your cut.

@davidlarson9975 3 жыл бұрын

Great video. Started as an apprentice carpenter in the summer of 69. I was given the best advice of my career: "Never let your fingers leave your hand." Been retired almost 6 years, with no major mishaps with a circular saw. Mistake number seven. I've worked jerks that did that and cut themselves really bad. When done with the cut, I always set the saw on it's side. Don't even have to think about it. Work safe my friends.

@manuelvarela2407 3 жыл бұрын

Amazing video. I agree with you on all the tips. Especially the one about checking the guard every time you finish a cut. I do this all the time. Sometimes it does get stuck, and the guard doesn't come down. If that happens...you know the rest. Also, I'd like to add an extra tip: Always use a sharp blade, a new one if you can. Ironically, the shaper the blade, the less chance of getting cut, because you don't have to "fight" with a dull blade, increasing the chance of binding or other hazards. Thanks for your videos, and keep them coming.

@danielferrer8856 3 жыл бұрын

I definitely agree with you, Manuel. Fighting a dull blade is never a fun time, I’d you know what I mean ;) Some workers alter the lower guard by tying or wedging it open. Do not do this-rather leave the guard to pivot so that the blade is always safe. Also, if your circular saw blade catches on thin-shave cuts or angled cuts, rotate and hold it open with an extended fingertip while still keeping both hands on the saw. AND always wait for the blade to stop moving before setting the saw down on your work surface. Getting a circular saw with a blade brake will reduce your wait times. Those are just a few tips that have helped me in my years of sawing and circulating

@saradiaz6074 3 жыл бұрын

I completely concur, I think this is quite the awesome enlightening and educational content. I too check the guard each time I cut and utilize a more honed edge after each usage. On a long cut, after setting up, I always walk the cut with the base off to make sure I’m not going to get tangled, stuck or some other disaster.

@danielferrer8856 3 жыл бұрын

@@saradiaz6074 mhmmm, yes what a well distinguish gentlemen, indeed

@michellevarela4901 3 жыл бұрын

Manuel we’re in accord. You’re extra tip really enlightened me, thank you so much. I too have a tip. This tip is for replacing an equipment. When replacing your equipment, always consult the new manual. Power-tool manufacturers are continuously improving safety standards and these will only be effective if you and your crew are using them correctly.

@jasonvarela7435 3 жыл бұрын

I strongly agree with your point. When it comes to carpentry or anything wood related, it is of utmost importance to ALWAYS be extremely careful, especially with electrical saws and blades. Just one tiny slip up, and you could lose a finger or two. Also, I think I know you. I remember you worked on the wood floors of my house. I loved the end result of your product. And when I checked your Instagram account @manoflooring, I was even more impressed with your talent. Keep up the good work Manuel! Have a good one.

@chrisbarry4467 6 ай бұрын

Excellent job man. Thanks for all the important tips. Nothing is more important than safety. I am loving your channel.

@heatherjamison8464 16 күн бұрын

Super helpful! I kept getting binding and realize now I need to prop it up 🎉

@bernadettedunn7749 Жыл бұрын

First of all, if you are not a teacher, then you should be one. I have just watched several of your videos and they are the best I have ever watched. Confident, precise, very well thought out explanations that are super easy to follow and so informative. And, I love how much stress you put on safety. I think you are brilliant. keep them coming!

@kostas010151 3 жыл бұрын

A very useful video. For the novice and the master as well! (a retired Orthopaedic Surgeon)

@jiara01 Ай бұрын

This was so helpful especially for safety. Thank you for making this video.

@AudraGibson 2 жыл бұрын

Awesome video. The circular saw is the only saw that I’ve never felt like I’ve gotten really comfortable with from a safety perspective. I’m ready to start moving past that and your video helped a lot.

@brianrobertson1211 3 жыл бұрын

You forgot two things: Safety glasses and unplug when changing the blade.

@Reej.Attingal 3 жыл бұрын

Wearing mask is also good.

@kisupantteri 3 жыл бұрын

Could not recommend this enough, seen my friend eye got hit from broken blade part

@yvonnedavis1363 3 жыл бұрын

Correct

@yvonnedavis1363 3 жыл бұрын

Correct

@kkarl7862 3 жыл бұрын

know unplug is more important

@jenniferlittlecook8436 2 жыл бұрын

Great tips to know. I tried having someone show me how to correctly use my saw, but nobody would take the time to do so. So, I just tried it and luckily I did fine. But after watching this video I was doing a lot of mistakes. I'm thankful they didn't turn into irreversible mistakes. I feel a lot safer knowing what not to do now. Thanks for making a great video for a beginner. Very helpful. Keep up the great job.

@JoseGonzales-ul9sv 2 жыл бұрын

I ll be happy happy to show you

@SycoticSmurf 2 жыл бұрын

On most circular saws they have an stopper sort of like a ruler attachment this can be used to make straight cuts without having to always focus really hard on a cut, this is generally on ryobi

@SycoticSmurf 2 жыл бұрын

Look at all the thing's like pitch, and angle control then there is a third 1. It's hard to explain exactly but if you need I can take a picture and show you.

@verngoossen2020 2 жыл бұрын

JUST cause they call it a circular saw ------- does not mean that you can cut circles with it-----------

@handlethese Жыл бұрын

@@JoseGonzales-ul9sv ease back horndog 🤣

@tonylatimer1308 3 ай бұрын

Thank you. Its great to be reminded of all the dangers you thought you knew. Well done.

@ejsantos2200 3 ай бұрын

Thanks for making this video. It reinforced my good habits and highlighted a few tips I have not yet used including blade height adjustments. I have a cordless Makita circular saw so have not had the cord to deal with but that was still GREAT information to see. I really appreciated the amount of detail and great videography showing up close footage of your propping methods and materials and your tips for placement of the props depending on the cuts. Thanks again, I'll be watching for more great videos from you.

@tomedwards5132 2 жыл бұрын

Just bought my first circular saw (DeWalt) and I found this video extremely informative with no frills. I shall be looking out for your future videos to help me use my saw safely and effectively. Thank you.

@TheHonestCarpenter 2 жыл бұрын

Thank you, Tom! Work safe 🙂

@ManishSingh2k 3 жыл бұрын

As a new DIYer, I couldn't thank you enough for these tips. I am sure that I would have done a disaster if I hadn't watched this video before working with a circular saw. Thank you very much, bro! You are awesome. 🇮🇳

@Firebird894 Жыл бұрын

Thankyou, as a woman who did not have a father around to teach me these things or any other handy men I had to learn on my own and I have found youtube to be brilliant at learning and picking up tips and tricks along the way. I have learned so much about the tools I use and how to get more out of them and how to do things safetly. Thankyou so much!!! I love your channel new subscriber!!!

@oscardarrell83 2 жыл бұрын

this is so important since i am a newbie to circular saw, just got my first circular saw for my new job as a carpenter..thanks for sharing this.

@hazlbri 3 жыл бұрын

You've provided really good advice. I would just add that the material to be cut should always be clamped or held firmly some other way to the bench, noit free to move around.

@ColinKlupiec 2 жыл бұрын

Great video. Good style of presentation. Another tip… when doing longer cuts, use a fence to run the saw alongside. Guides the cut, avoids twist and kickback. Takes a bit longer to set up, but worth it.

@TheTwangKings 3 ай бұрын

EXCELLENT advice! I would never think of so many potential risks. Thank you! 😊❤😊❤😊

@IshaniMehta Жыл бұрын

This is an excellent list. Some of these are common sense, so I've not been doing those myself because safety is most important. But some of them - especially the ones related to binding and jumping of the blade due to certain ways of cutting - have been very helpful. I have had all these issues when cutting vitrified tile, which is why I looked for such a video, to make sure I don't face such issues when working with wood. A circular saw is amazing, but easily dangerous too. These tips should become a part of the operating manuals!

@josecaban8379 2 жыл бұрын

Great guidelines. Also is good to add about when is time to inspect or change the blade. As you said saw can last 20 years! But not the same occurs to the blade. Working with a bad blade is also dangerous.

@free2chasehappy 3 жыл бұрын

Amazing video! Safe hanlding with power tools isn't discussed enough and I've seen too many accidents to not take the time to do my job safely.

@vakuraaaah Жыл бұрын

Needed these reminders. Concise, informative, and well put together. Great video. Very glad I came across this before heading outside to throw together a bunch of planters. Now I’m more safety-minded instead of focusing on my time crunch. Thanks!

@7snowdog Жыл бұрын

Thank you for this video! I'm a beginner DIYer, i've just bought my first circular saw (a small one, but still). I've never operated any. This video is pure gold to me.

@andrewk-majordochomerepair6014 3 жыл бұрын

One of the things I like about my SkilSaw is that it is a "Southpaw" version. Only a couple manufacturers make these. I was debating between this and a Makita, but opted for the non-worm drive which I found for the work I do too cumbersome, heavy, an unnecessary. I find the Southpaw version, being right handed but left eye dominant, much easier for blade tracking. Also, as you mention, I have a designated set of 5, 2x6 blocks of wood I use when cutting long boards, keeping the those nearest the cut within a couple inches. The 5th block is in case the board is 10+ ft long and could use the extra support. It really only takes about 10 seconds to grab them and set the up for a cut.

@tjburr1968 Жыл бұрын

Great video, I appreciate your insight. Surprised you didn't mentioned blade condition. Using a dull blade is a common mistake too.

@candicehunter8417 5 ай бұрын

what a great video! you've given me the info I needed to safely add this to my arsenal

@pepelepewpew8416 Жыл бұрын

superb dude. I can't believe I've only now found you,... I know I'll be coming back to your simple, easy to understand and helpful videos. None of that 20 minutes pre-amble about the last 10 years of your life of cutting a piece of CLS or cowboy music. Top job man.

@rickschroeder4703 3 жыл бұрын

Really enjoy your comments, great for the DIY'ers!

@TheHonestCarpenter 3 жыл бұрын

Thanks Rick!

@rcud1 3 жыл бұрын

These are all good tips that I mostly learned the hard way! Biggest thing is to setup a decent work area and supports for cutting.

@TheHonestCarpenter 3 жыл бұрын

Yep, a good part of my mornings has always been getting my cut area ready, rcud. I got really particular about it over the years, to where I would insist on it even if I was just making a few cuts.You screw up less lumber this way!

@colinklang 3 жыл бұрын

The prep work is just as important as the job itself, arguably more important considering a proper setup makes for a smooth workday

@markchidester6239 3 жыл бұрын

Straight edge with clamps for the long cuts

@olyjfitness 3 жыл бұрын

@@colinklang thankyou . If ever I get teamed up with a messy carpenter i spend 20 minutes cleaning up and getting it right. Some people dont clean right until the end. Stepping over their waste pile..not good work practice . Those guys usually are not the best you find.

@Perfusionist01 2 жыл бұрын

THANK YOU, like many amateurs I don't fire up the saw that often, so it's easy to forget these great safety tips.

@NRecob 9 ай бұрын

OUTSTANDING video! My Dad used to build houses & your video has NAILED the biggest mistakes w/a Circular Saw! VERY WELL DONE! THANK YOU!

@robm9253 Жыл бұрын

Excellent advice. Also for DIY, never use the saw at an awkward height or position. Make sure that you are working in a comfortable position

@correcthoarsebatterystaple 11 ай бұрын

Good point. I’ve seen people cutting the tops of fence posts with a circular saw. Not a great idea, as your neck is in the cut path.

@garykorzelius5930 3 жыл бұрын

Great video as always. I learned a few things I was doing wrong. Thanks!

@TheHonestCarpenter 3 жыл бұрын

You're welcome, Gary, thanks for watching!

@elizabethlee5953 Жыл бұрын

This was so helpful! I'm a new home owner and I recently bought a circular saw for some projects but was nervous to use it, and with good reason-I didn't know any of this! Thank you!