id love to see more of that 120 year old motor with the priming cups!

Something about seeing an engine run without any covers on is amazing to see.

If he doesn’t use it for a derby, put a blower on it. It will sound nasty.

That Chevy start up was priceless!👌

Who needs rock auto when you havea Peg to source parts from 🍺

Thank you! I always wanted to hear what it would sound like.

I don't even have a diesel. But this engine makes me want a diesel truck..wow it sounds amazing.

Sweet ! Always enjoy your uploads 👍

What a treat, 12 valve nice, they always start

you should put a belt driven supercharger on it.

Seen your signs on the wall, Devon and ATB ones so must be pretty local to me! Nice to see local content

Cool video, love all your content

Love your videos man ...

Finally got to see the man behind the entertainment

Hard to go wrong with a P-pump Cummins, especially the 5.9l 12v. Super beefy engine, that's damn reliable without all the emissions BS that all the newer engines are stuck with unless you delete em.

Great Video as Always. Thanks.

Or put a blower on it and run zoomies. Definitely worse then the turbo but way cooler

Also tdc on compression works to. Watch the intake valve open, close then when piston is at tdc in that cyl set valve lash on both valves, only works when you have spark plugs, or injectors/glow plugs out to gently roll over with a screwdriver or coathanger down the cyl and feeling for tdc.

Great video man

Some people want to hang around Movie stars. Foot Ball players etc. I'd rather hang out with Mechanics and Dudes that love and work on Engines. Like it or not? There the true Hero's that keep everything going. Rain or shine? Lets hear that Turbo whine! 😊

Sounds good. Keep it up!

It sounds great !

Nothing like having a sweet Fram oil filter. Need to get that junk off there

Makes me wonder what a straight 8 with racing headers sounds like if this sounds that badass

6 turbos 6 turbos you need 6 turbos

My uncle showed me setting the valves he's great

Gotta love those autozone bargain bin zoomies.

Great vidja, needs a procharger

Heck yeah brother 💪🏻👍

👍👍,..right on feller 👊

That sounds sweeet !

You can do one at a time per cylinder when the other is open just make sure the valve you're doing isn't still on overlap. Personally I just find about tdc on number one then follow the firing order. Might not be the fastest but it's easier to keep track.

When setting valves I always just turn the engine over and do the ones that are loose, or if im feeling it I might bring each cylinder to tdc and do both. When doing 4 cylinder 8 valves all you have to remember is 9, eg when 1 is open adjust 8, if 5 is open do 4 etc.

Love it when you run a turbo diesel as an N/A, I bet that 130hp feels crazy 😂

intake closing set exhaust. Exhaust opening set intake.

3:15 Pretty much the only reasonable way to set valves when you have a large aftermarket cam with a lot of duration. Even in the "order" some valves wont be on the BC of the cam. That way is pretty much fool-proof, and if you go in the right order, usually only two rotations are needed. One note, though: Rotating in the normal direction, the exhaust valve should just be starting to open before adjusting the intake valve. Conversely, the intake valve should just be about to fully close before setting the exhaust. This ensures you stay away from overlap between the lobes, if there is any.

Damn she sounds nasty! I love the naturally aspirated 6bt and now redundant it is.

Either Hines creek or the screw cab schlong box needs a 12 valve swap

Put clappers on all the zoomies would be sweet

Hey what do you want for that late 70s Ford grille? Need one for my 79 F-150 Ranger

I think those 12 valves came from the factory with a rear main seal leak. I haven’t had one yet that I’d park on the good concrete 😂

Should make a custom long header for it. Then do a full 3inch exhaust system on a truck that thing would be so clappy

What is the old engine? I have a repair manual from the 20s.that covers most old hd trucks

Any 6 cylinder is easy to set the rack, #1 TDC you do #1 intake and exhaust, 2 intake, 3 exhaust, 4 intake, 5 exhaust. Rotate crank 360° and do the remaining and you're done.

I’ve always wanted to take a 12v and throw a blower on it and straight pipe without turbo

I'm just going to point out that here's an overlap between he 2 valves on the same cylinder in which case one you shouldn't set one even is the other one is rocking.

The sawed off frenchman

Sounds like a old airplane idling

Except a Mack E7, valve have to be set by marks on flywheel lobe has a flat spot on back

So..... why was it breaking up so bad?

Needs a blower... 6v53 might be a little small but a 8v53 would be good

I always go by 15 is too young 36 is too old 24 is just right for valve lash order on my cummins nailer every time.

Two belt driven super chargers a smallen and a biggen for all the woosh.

👍

Looks like the work of a frenchmen..... could be worse i guess.

Pretty sweet, what’s your opinion on the whole, “having an exaust that’s too short causes vavles to cool too fast and warp” heard this never new if it was a wives tale but looks like you’d be able to have an idea since you’ve got a pretty short exuast

6 mini turbos still with zoomies

Where is the COOLANT???

Hey I’m wanting to ask questions about a older video (commenting on this one in hopes you see my comment) I’m wanting a how to video on making a drum paddle for the fourtrax like you have posted a few years ago. Any help or links would be awesome. Thanks

You need to advance the timing a little more to get rid of the popping and stumble.

Does it matter how far it's rocking to set other valve like should it be all the way down

And que the oil filter comments!!

6 EBAY lil turbos

Valve set Thats like pounds feet of torque.

I have a 1999 Dodge 5.9 24 valve for sale with 175,000 in my motorhome with a Allison transmission engine and trans works great 👍 oil is clean. I need $7,000.00 for entire coach. Come and get it it starts and runs 🏃‍♀️

I think he needs to leave the Zumiez and super charge it

Then 12 valves always deletes their own rear main seals

With the Zoomies - smoke is only coming out of 5 of them. Cylinder 2 must be different somehow??

I’ll dyno your exhaust manifold lol.

Def supercharge it

Alot of people don't know that the valves need to be set

I thought it be a lot smokeyer🫣🫣

Sounds like it needs an hx40 lol now put some boots to it with a Roots blower and really build a unique 12 valve 👌

Get 6 Hiroshima hairdryers and put one on each pipe.

Now put a super charger on it.

It still sounds just like a 12 valve🤣

Add a procharger, or go big with a proper blower...

Idles nice, accelerates like POS.

Why is he runnin the orange can of death

Running rough because it needs forced air at higher rpm.

Not running on all 6 at the start and near the end sure sounds like the timing is off.

Without forced induction that motor's no more than a boat anchor that makes noise.

If you want to run zoomies put a pro charger on it

I do 1-5 3-6 2-4

Pull the # 2 injector and bench test it. It’s not opening correctly.

She doesnt like the non turbonics eh?

Use a air gun on the afc so the injection pump thinks there's boost

Set the valves on that Slave valve!!!@

It's called valve lash not valve set

I was interested in watching this video until halfway through when he said valve set and I was confused then he kept saying it over and over and I thought...... valve lash its valve lash who tf says valve set your "set"ing the valve lash i ended up not even finishing the video

Be careful with that universal valve adjustment instruction. I know of at least one engine out there you can NOT adjust that way.

Why do people fix up engines lots of time and effort and money then put the poorest quality oil filter on engine ( orange can of death) fram Will ruin a engine... when Cummins filters wix are top quality.... is it a mental problem not spending about 5 extra bucks for the best I have a shelf in our machine shop with carnage that fram has caused ... bits of valves pistons etc ... cant fix stupid

Fun fact Cummins is actually a Ford engine and they sold the patent to chrysler