Part 3 is HERE! kzfaq.info/get/bejne/bMuSeap_tdbVdJc.html

As a professional mechanical engineer and a car enthusiast, I love what you are doing. Keep up the great work and continue posting these videos so I can continue living out my childhood dreams vicariously through your channel.

Perfect length video

Nearly 60K subs bro! Stoked for you! Your builds have come a long way from flipping exhaust and putting turbos on them

It’s going to be interesting to see this all come together! FYI: Link for parts is in the description 😁

To be honest i love the thorough explanation and approach.Every important step about putting the build together is included in the videos.Your welding is also remarkable,could probably get you 24 bucks an hour.❤️👍

I think there is a solution for the oil ,i have seen on grind hard plumbing co , they used a oil pump witch bolted to the head of the motor and get oil to the turbo. If your engine is the same it may be just a bolt on solution. Definitely brace the turbo to the frame,because you know the vibration s will destroy the welds no matter how strong they are. And be very patient with welding the turbo flange cuz it seems a little bit to thin and may warp do to heat. Overall good progress I did like the videos. Good luck man!

Before we know it this drift kart will end up being a full sized cr500 shifter kart with the way bro is going at it Keep up the fantastic work mate!

This is sick 😊 I always wondered how to do an EFI on a quad

Probably be a good idea to make a turbo to chassis mount so ya don't crack the mani

man I'm so excited for this I keep checking your channel every few hours

Mini turbo drift go kart , hell yeah ! 🎉

I like 20/30 min vids I can’t lie 🤣🤣

Loving these episodes,maybe an e36 body to go on the trike when finished that would be sick.

Surely ready for vicdrift comp rd. 1?

Maybe you can try oil cooler adapter for turbo oil feed and return🤔

Such a sick build!!! I can hardly wait to hear it

From everyone in the USA more longer videos plz this still not enuff 😂 💯😂👍🏼👍🏼 boosted go-kart❤ 👍🏼👍🏼

What a sweet thing, keen to see the final product!

meant to be sleeping but fineeee i’ll stay up to watch haha love this series

I'm loving this build and will be putting my order in for 1 once you finish yours. I might go twin turbo just to 1 up you 😜

Mike lake your the hero of the whole build 💯

Maybe another bit of piping at the rear of the front wishbones to the frame? Happy trails, Cowpoke

still watching your videos from last year

Put a bigger karburator on it it give it more speed and probably more boost to 😄 love the content keep it op

You need a pit bike oil cooler kit for your oil feed it bolts onto the side of the head and instead of running the cooler utilise the lines for oil feeds for the turbo

Yeah boi! 100k in no time matey! Keep it up! I see that another channel pretty much used their big money and seemingly copied your project and did it all in one go 🙄 I subsequently unsubbed from their channel, LOL! Stoked to enjoy the journey with you!

Love this build, and your vids, and don’t heat wrap the intake pipe it will crack faster

That exhaust diameter might make it spool slow. Tiny single piston motor already doesn't have much exhaust velocity. The intercooler is a good idea because it'll act as a plenum for the intake charge

For your oil feed just buy a oil cooling radiator kit for a 140cc thumpstar 🤟

if you search honda c50 turbo on yt there is a video of a guy that built a litle 50cc motorbike into a 130cc turbo with an oil cooler and everything im not sure if it has fuel injection tho. looking forward to your build for sure😁

Just started putting a turbo on my own 125cc 4 strone bike tho this bike already came with fuel injection it is gonna be a bit harder to tune. Put this thing has no problem spooling a the cheap rhb31 turbo because you can feel it fall on it’s face when it hits boost😂 but this is pretty cool to see. Interesting too see how this runs vs how my bike rund🤟🤟

There is math to work out pipe size, that charge pipe is def too big. Sweet kart

you can get oil pumps for those engines that run off the cam

i think some gussets would go a long way on the frame, especially where the top bar meets the gooseneck

that exhaust pipe going from the engine to the turbo might be just a tad big for a 125cc, with smaller pipes the pressure and speed of the exhaust gases are higher and spools the turbo easier

Use a pulse pump to a mini computer radiator to feed the turbo oil. No tank or anything the computer radiator and lines will hold all the oil.

FINALLY PART 2 YAYYYY

looking foward man

That intake is sick as hell! I’m wondering if micro burst nitrous will be coming into the mix

Loving the lil atv my little brother and i have one we wanna build as a drag atv

She's coming along mint👌🔥 I remember watching the BoostedBoiz turbo their shopping go kart, they did a similar setup with the EFI as well just in a slightly bigger engine, if I remember right they used a small external electric oil pump plumbed up and fed from a separate oil tank and then drains back from the turbo back to the feed tank kinda like a fuel cell system, I can't remember if they added a oil cooler to the system or not but would be a good little addition to the diy stand alone turbo oil system👍 either way I'm sure you'll sus it out, keep up the good work mbro🫡💯🔥🔥#TEAMLAKE #TURBODRIFTKART🔥🔥🔥

very well done !

Can wait for the noises🎉😂

i think the turbo manifold pipe is to thick and airflow gets lost in there . i would go with a thinner pipe to increase the airflow and pressure to spool up the turbo faster and higher . go with the original size pipe from the exhaust .

Keep doing what you are doing mate i am enjoying the content

So essentially a road legal vehicle.....😂✌🏻

I like the color of the bmw amazing color 🎉

If u get a oil cooler take off plate that will allow u to us the engine itself as a oil pump from the engine oil

Don't forget to build and intake manifold chamber ❤

Would test the EFI System first, before installing the turbo. Am havin a project like this in my plan for this year. Nice videos and interested in new ones coming! Cheers from Germany

Patiently waiting for the efi kit install, I've heard these can be a real PITA with possibly needing to switch over to a hall sensor on the flywheel for spark signal

Hell yeah

should do a pie cut turn down exhaust would be cool

Grindhard plumbing just did a build and turbo charged a 125 quad they found an oil pump adaptor that bolts to the engine might be worth looking at

Love the build but also you will want to add a brace for the turbo the the frame otherwise it will crack everything

This thing just keeps getting better and better! Does the turbo clear the front wheels on lock? Might need to clock the turbo a little bit

Need a led whip on the back

It needs a Mario livery ! Then test drive it as Mario 😂

Hopefully its flutters hard and has a mean pop and bang limiter

Do you think that the conrod and piston can handle it? (Im guessing that the gearbox should be fine, they are straight cut gears and probably used in bigger engines as well

Buy a oilcooler kit to the engine and conect it to the turbo line then you have oil to the turbo!!

Always awesome content bro! Cant wait to see the results :D CHUR

Yess

you should make an electric on i know petrols way cooler but electrics fits smaller and is way more powerful (if you get a decent size motor)

Been a hot minute since i had pitbikes but i think you can add an oil cooler to the 125? Like the 140 ect had.

What have you done with the old carb from the 2strok engine

Is that the yellow evo from GT4 in the back round?

Careful with the intercooler run, make sure you’re getting enough air to the intake quick enough or you’ll choke it.

would like to see it running with EFI!

Mooooorrreee !!

Yo look into a Daytona 190cc 4valve when that 125 dies they make 22+ hp from the box and aren’t much bigger then that 125 meant for the same pitbikes that motor is could make it real crazy 😂

Is there a link for this fuel injection kit. Would love to install it on my agm caferacer

Nice👌🏾

Why not put the turbo in the front?

to have a turbo work on a small engine there can not be long pipes everything has to be tight and short for the best performance

Yeah i rekon the 2 inch piping would be too big and would take attention away from the turbo

You need a pressure canister between Turbo and engine to make the engine run properly. Check boostedboiz Kyle's Turbo shopping Kart. Has a Turbo 225cc 5 speed with fuel management, ecu, fuel pump, injector, tune, 2 step. He did all the science for you

Add a k&n filter and mini radiator pls

Mbro u gotta boost making videos aye 😂

Upload moreee

Where did you get the turbo?

What turbo are you using?

Nitrous will get her on boost 🤣👌

What are you going to do to counter the weight all at the back

buy some cheap chinese oil cooler that included the adaptor that connected from oil line at the right side of the of the head.

Hey i have an idea flame thrower kit 😅 or 2step kit or both

Imagine a 450 plus T on e85 in a gokart chasis That would smoke Amy honda on the road 🤣🤣

I thing it needs oil cooler

Instead of welding a nut why dont you just run a m10 tap throgh just make sure your drilled hole is 8.5mm

what will the top speed be?

I’m not trying to rain on your parade. That piping is just too big. The turbo is too far away to have no lag. Sure it’ll work. But u don’t think it’s going to work well enough. The motor is just so small. Plus the type of motor. They’re only single cams. A big bore top end would be great for that. Probably turns it into a 200cc. That may be able to spool it pretty well. But not as great as it can be

Comment bro less go

make it a 4valve

Mario kart any one 😁✌️

short exhaust manifold better faster spool

WHY DIDNT YOU RUN IT

Can you link the ecu

How long until the next video😭😭😩

I MEANT BIGGER TURBO