Here is how I converted a John Deere Brush Hog to a hydraulic powered Skid Steer Brush Hog.
Пікірлер: 89
@tonysantana14935 жыл бұрын
You did an awesome job, I am working on my lawn tractor trying to install hydraulics. This really inspired me to keep moving forward. Thank for the video!!
@oby-16074 жыл бұрын
That was the most interesting build I have seen in a while. I have a brush hog type mower with two heavy flail blades that mount to a very heavy arm that do the cutting. I would love to be able to mount it to my front end loader and run it that way instead of looking back all the time. The loader has been converted to a Skid Steer Quick Attach system already. Thank you for sharing.
@jessesmith118110 ай бұрын
I watched this a few years ago. Just came back today amd rewatched it. Turns out I am still impressed!!! Great job!!!
@dreamcatcherdb2 жыл бұрын
Thank you for the video. I found most of it very inspiring and informative. The parts concerning the shafts and shear pins were especially helpful but I wish you woulda shared more about what you learned pertaining to choosing the hydraulic motors.
@thomastommy11927 жыл бұрын
Jerry you did A great job on the bush hog. You are A Jack of all trades. You seem to have a natural talent for making things work. As always A great video. Ten thumbs up my friend. Thanks for sharing your video.
@RosaStringWorks7 жыл бұрын
Thanks for spending your time.
@daveogarf6 жыл бұрын
Jerry, you are AMAZING! VERY COOL conversion.
@johnbrock16026 жыл бұрын
I like your honesty very good. I was the last generation to own a farm that had been in the same family for over 100 yrs. the farm was in Nebraska ( go Big Red )
@carcrazycansgarage30736 жыл бұрын
Great craftsmanship . Someday I'd like to do the same thing but with a flail mower for chopping up pruning.
@dalepal7 жыл бұрын
Nice job with the conversion and a handy attachment for your Bobcat.
@RosaStringWorks7 жыл бұрын
Thanks Dale.
@dunc19587 жыл бұрын
Thats just fantastic! if I had that I'd be out playing on it all day. Really impressive.
@RosaStringWorks7 жыл бұрын
Thanks Duncan. My wife has already claimed it for herself. So I won't get to play on it till the new wears off. lol
@RandySchartiger7 жыл бұрын
Man it does those thick tall weeds in short order! Good work Jerry and very amazing stuff! Love the "All Day" shirt, my buddy Kimbo Slice used to say that all the time.
@RosaStringWorks7 жыл бұрын
Thanks for taking a look. My wife has already claimed it as hers. She's been knocking down brush everywhere.
@jessbrown31145 жыл бұрын
If you ask people and they say you can't do this or you can't do that, well I don't ask that way i don't get told you can't do it. Just do it and if it don't work just do something else. Thumbs up from me on that one! Some folks know what they can't do, and some just get it done.
@williamcastleberry73387 жыл бұрын
Nice job on your build. I have been using one of these (Only Factory made). It did not have a bypass, when you shut it down in the skid steer the blades came to a sudden stop (first time I used it I liked to have jumped out of the skid steer, LOL) hasn't hurt a thing You idle the engine down before shutting down the hydraulics
@RosaStringWorks7 жыл бұрын
Thanks for looking. That's wierd, the factory one we used had a bypass built in. The blades slowed naturally. In addition, the Surplus Center guy definitely recommend one to avoid trouble down the road. They even provide a diagram online. Finally others I have seen on KZfaq put one in too. So better to be safe than sorry I guess. I'm no expert but I like the slow down over the stop.
@lrstaf66 жыл бұрын
Is there anything that you don't build yourself? Great job again, even if you did have to go through a learning process to get there. Everyone that is successful at anything has to go through a learning process and be ready to change plans and improvise as the need arises.
@exercisemyrights7 жыл бұрын
ha...love it..people dnt realize the work it takes t keep up a farm..good stuff
@RosaStringWorks7 жыл бұрын
walnutlogger 43 its a full time job. Thanks for watching.
@cleatrampler7 жыл бұрын
Had no idea a Bobcat that size would run a brush cutter very well. Been wanting to build one for some time but have been too lazy and with my lathe broken, did not want to take on the challenge. Only thing I want to do differently is make a floating mount and have casters for mowing. If I had a rigid mount I would put rubber tired casters on the front so I could make turns without digging in. Then again with steel tracks on you don't have to worry as much about getting stuck or digging holes when you make turns.
@RosaStringWorks7 жыл бұрын
cleatrampler Thanks for watching. We don't really have any problem with it digging in. I suppose if you're on really smooth ground cutting only grass, the casters would work out okay . But out here that wouldn't work at all, too many rocks, brush, and ditches. I will say the thing works even better than I expected. It is awesome my wife just loves it! Thanks again.
@watahyahknow6 жыл бұрын
the pressure relief valve bypassing the overpressurized oil might cause the hydraulic oil to get hotter than usual , might want to keep an eye on that that contraption might actually work on small trees and stumps too as you can lift it up high enough with the bobcat (prolly duck out of the way of the chips that be flying though) another nice thing is that you can see wat youre doing without turning around in youre seat like you would need to do when driving a tractor with the bush hog atached
@RosaStringWorks6 жыл бұрын
We've been using it for quite a long time now. I've cut down 4 inch trees with it quite easily. It works really really good. Thanks for taking a look.
@exercisemyrights7 жыл бұрын
ha..no kiddin. watchin you make a calfskin head for a banjo atm.. iv always heard groundhog skin.. guess the old timers used what they had.. keep up the good work..
@scottwhite23794 жыл бұрын
I am surprised people dont just use a prince pto pump slid onto where the shaft normally goes. Instant mounting. I plan to build one of these for my tractor. I have a pto hydro unit now that runs a front mount blower. Too easy to convert a hog to hydro. From my research, you can gain some use by cutting the front back a little to expose a few inches of the blades for larger brush
@hillbillyfranks Жыл бұрын
Just subscribe to you You did a heck of a Job on that I like that I'm gonna be doing mine pretty soon but I didn't really know what kind of motor or what you had to put on it So I'll keep watching have a good day
@tomgamehannel24027 жыл бұрын
Great video
@DriveShaftDrew7 жыл бұрын
great job buddy works awesome
@RosaStringWorks7 жыл бұрын
Thank you. My wife is using it as we speak!
@johnsnook23587 жыл бұрын
I love it! Now you need to paint the front of the Bobcat.
@RosaStringWorks7 жыл бұрын
Thanks John. Too many other things in line before I can take time to paint the Bobcat.
@johnsnook23587 жыл бұрын
I thought so. If you can video some of them, I'll watch them. I enjoy these videos also.
@jmills8715 жыл бұрын
Nice job
@MacDonaldFirewood.TreeService Жыл бұрын
i like your design been thinkin of making one for my avant( same as a skidsteer) with my brush cutter, is the shaft you used going from pump to the gear box, an old pto shaft?
@1rudymartin7 жыл бұрын
Jerry your a man out of my own heart, why bye it if you can build it and strength why's, why build a yacht when you can build a battle ship, fantastic. Regards. Rudy.
@papercloset1568Ай бұрын
Hi, I am looking at doing the same. Can you share part numbers on the hydraulic pieces? great idea forget using riding mower for cutting thick tall grass.
@bigfootGeorgia7 жыл бұрын
Excellent idea, what part numbers on the motor, check valve and cross over relief? thanks,
@RosaStringWorks7 жыл бұрын
bigfootGeorgia its been a while, sorry don't recall. But it has to be sized to your machine anyway. The best thing is call the Supply Center in Nebraska tell them what you have and they will recommend the parts for your application.
@iamrichrocker7 жыл бұрын
Jer..fantastic engineering....have you considered a plexiglass screen to deflect debris? didn't seem to be an issue in the short application test though...
@RosaStringWorks7 жыл бұрын
Thank you. We have a windshield for the Bobcat. So far, its not been a problem at all because the mower is well below the driver. In fact, it is MUCH better than when using the same mower on our tractors. Used to get debris hitting me all the time. So far none of that. Now that I've used it a while, I am in love with it. lol. Thanks again!
@RenimacedoАй бұрын
Hey! What is the model of the directional valve installed between the input and output sockets of the hydraulic motor? Thanks!
@randypotts55683 жыл бұрын
How did you get the stump jumper plate off the gear box?
@georgetempest96275 жыл бұрын
This is how damn good welding should look, like a row of pennies :o)
@richardmead92257 жыл бұрын
I bet Jeff Bradshaw is drooling.
@RosaStringWorks7 жыл бұрын
I hope so. Can't wait till he sees it! Thanks for watching.
@yaniratar28342 жыл бұрын
Hello what hydraulic motor size is it rpm and displacement ? I'm going to do it myself,i had an old motor and its slow and under power
@Russ-od2yy6 жыл бұрын
Thats awesome. Have you ever tried it on blackberries? I know the stocks are a bit tougher than most brush and I have a ton of blackberries on my property I would look at building something like this to remove them if possible.
@RosaStringWorks6 жыл бұрын
Blackberries would not be an issue. I've cut 4 inch trees with it. Thanks for what
@Russ-od2yy6 жыл бұрын
Rosa String Works that's awesome appreciate the response
@jameswilson1975 жыл бұрын
With that new super bush hog where the wild hogs gonna hide?
@wolfgangthiele27853 жыл бұрын
greetings from chile. nice work, iwould like to copy it!
@theflash14254 жыл бұрын
I don't know whether to be happy or sad that I'm not your neighbor! If I WERE your neighbor, I'd probably be self-shamed into trying to keep up with all your work and creativity, which would probably kill me! Also, you'd grow to be annoyed with me because I'd probably be over at your workshop every day or so, begging to use something! On the other hand, I could see my bluegrass skills going up, assuming you'd let me pick with you and your boys! After all, I DID pick with Doc Watson once, back when Merle was still alive. Or maybe I should say that I was utterly embarrassed in my attempts to pick with Doc Watson! Beyond being the best flat-picker alive at the time, he was also a very gracious and nice person.
@teleman657 жыл бұрын
Would you adopt me and be my Dad Please ! You are freaking Awesome ! AHAHHAH ! You never cease to amaze me holy cow your gifted. God has really blessed you sir.
@RosaStringWorks7 жыл бұрын
Thanks for the compliment. But, sorry don't need anymore kids. The three I have keep me busy enough fixing their stuff. lol
@teleman657 жыл бұрын
I'm sure they do, and since I am 51 I might be more trouble than I am worth anyway. But at least thanks for your videos,
@KriszFa Жыл бұрын
what size the hidraulic motor? 125ccm?
@Lanyappi6 жыл бұрын
This idea should be patented, and then marketed.
@RosaStringWorks6 жыл бұрын
Ronnie Elliott thank you very much. It is an awesome machine. We use it a lot here on the farm. Unfortunately they are already on the market. The reason I built one, rather than by one, is just because they cost about 4,000 bucks or more.
@saoirsepaddy7 жыл бұрын
You miss a spot ! Never mind you got it :)
@RosaStringWorks7 жыл бұрын
Thank uou for taking a look.
@billsterling64853 жыл бұрын
Yippee i yeaaaaaaa worked great I loved it......
@ExploringCabinsandMines5 жыл бұрын
Put wheels on it and place the arms in float
@RosaStringWorks5 жыл бұрын
We don't use it as a regular brush hog will use it to cut down in ditches and small trees Etc so there's no need to put wheels on it
@ExploringCabinsandMines5 жыл бұрын
@@RosaStringWorks my point is it could just float and follow whatever terrain and not gouge into the ground without adjusting it all the time as skidsteers bounce because of short wheelbase , you could still use it as you have been, just a friendly suggestion. :-)
@ElderlyIron7 жыл бұрын
What key is that in?
@RosaStringWorks7 жыл бұрын
Not too sure, forgot to use my tuner. Thanks for taking a look.
@Fulmer275 жыл бұрын
I might have missed it, but what motor was used? Great build!
@RosaStringWorks5 жыл бұрын
Sorry it's been too long ago I don't recall what it was. I just contacted Surplus CenterI believe is the name of the company and they told me the specs that I would need in they supplied the motor
@joeydalia25724 жыл бұрын
Great build... How do you like those tracks on your skidsteer?
@RosaStringWorks4 жыл бұрын
Just traded up to a T300 with tracks. Awesome.
@kevinandivy4 жыл бұрын
What thickness attach plate did you use, you know they come in 1/4 5/16 3/8 and 1/2"
@RosaStringWorks4 жыл бұрын
It was quite a while back. I haven't used it in a while, but I believe it's 1/2 inch. It does work really well.
@Talisman-tb6vw7 жыл бұрын
I'd paint it hot pink, so you don't loose it in the brush :D
@RosaStringWorks7 жыл бұрын
That might work for you but according to my eye doctor I am profoundly colorblind. lol Thanks for watching.
@Talisman-tb6vw7 жыл бұрын
maybe your eye Dr is color blind?
@darrellblanchard23627 жыл бұрын
i didn't see any strings! just kidding. looks like it works
@RosaStringWorks7 жыл бұрын
Thanks Darrell.
@edwinnavwinwells46395 жыл бұрын
can u give the email address where i can buy the hydraulic motor
@RosaStringWorks5 жыл бұрын
www.surpluscenter.com/
@waynegoff7647 жыл бұрын
Bye bye and RIP to any little critters that were residing in there.
@RosaStringWorks7 жыл бұрын
They have plenty more space just like it. Thanks for watching.
@waynegoff7647 жыл бұрын
Not if they brought the farm. Hopefully they heard you coming and scarpered. Nice engineering job by the way.
@boobacockaa4 жыл бұрын
Hurry up & get on with the video please.
@RosaStringWorks4 жыл бұрын
That's what they make the fast forward button for. If you don't like it you don't have to watch you're a big boy now.