This is a great video for starting out and learning how to get patterns to the wood as needed to work with them Thank You.
@user-jt2tw1xx2l2 жыл бұрын
*This is my second WEN tool and they are both great **MyBest.Tools** I needed to do some trim work around the house and needed a scroll saw for the intricate work. No complaints so far.*
@rashidtayidi83708 ай бұрын
Effective yet simple solutions to overlay pattern on blank wood to scroll. Thank you.
@Jeremy_Fielding6 жыл бұрын
Thank you for the video. Several of these I have not seen before. Your editing is greatly appreciated also. Well timed, sped up in all the right places, and you stayed focused on topic. This stands out among many KZfaq videos on related topics. Please continue to do so. Excellent job.
@jpcr446 жыл бұрын
Just bought a scroll saw, and thanks for showing me how to get started.
@discgolftrainnut9 жыл бұрын
I've only been scrolling for a few months but got hooked after watching Charles Dearing's videos. I've already upgraded. I use spray adhesive and stick the pattern directly to the wood. Mineral spirits wipe any glue residue off easily.
@elainetaylor66707 жыл бұрын
As a newbie to scroll sawing I found this video to most helpful and informative, thank you! Elaine
@bobbailey72354 жыл бұрын
Thank you for taking the time to make this video for all of us newbies. Have a wonderful life!
@pennylane91553 жыл бұрын
Thank you for showing the various methods to transfer the image. I have only tried by gluing the image directly to the wood, this has worked well for me on the various projects that I have done so far. I have found it quite easy to remove the paper after by using a damp sponge and most of the time it peels off very easily.
@elainetaylor66707 жыл бұрын
As a newbie to scroll sawing I found this video most helpful and informative, thank you! Elaine
@heylar26 жыл бұрын
For intarsia projects, I use the clear shelf liner paper. The reason is that I can see the wood pattern and place the piece to be cut In the direction of the wood grain. Also, the pattern can be removed and repositioned if necessary. I then place packing tape over the top of it. Works great for me and easy to remove with no residue left.
@oldman7199 жыл бұрын
I have been scrolling for many years and haven't heard of a lot of your methods. It is very interesting. I use the spray adhesive. It works well for me. Great video.
@insensitivedriver82246 жыл бұрын
Spray adhesive, then packing tape over it. You can take it off with a heat gun or hair dryer, then wipe with mineral spirits. Learned some methods from the vid, great job!
@demetriminotakis86424 жыл бұрын
Thank you for taking the time to cover these many different ways to accomplish the application of a pattern. I appreciate that you did not waste any time with random topical thoughts and got right down to it. Liked and subscribed. I wish you much success.
@FrankCraigJr4 жыл бұрын
Thank you for such a comprehensive education on this topic. I look forward to taking advantage of the other information from other videos you have made available.
@vincemoser46369 жыл бұрын
I usually use graphite paper and trace the pattern on. I have recently tried taping on a copy of the pattern on the wood with packing tape it worked well and kept the sides of the piece real smooth where little to no sanding was needed
@LarryElterman4 жыл бұрын
Loved your Video. Excellent! I will share my modification of your Ink Jet printer method. I live in the Philippines. I don't have readily available the fancy papers you talk about and some of the things I did try (like plastic report cover sheet) immediately jammed the printer. So what I did is take a regular piece of letter size paper and cover it with clear (three inch wide) packing tape. This worked perfect!
@JorgeMacau7 жыл бұрын
I liked all of your methods! Thanks for the valuable information.
@PHIL_S7 жыл бұрын
Best vid on affixing patterns - thank you for doing this vid - wondering how just placing the pattern on the wood then clear taping over it might work
@tophervanous69382 жыл бұрын
Thank you so much! Very helpful
@Arny5808 жыл бұрын
I use blue painters taqpe but I spray not only the pattern but also the blue painters tape. The pattern really sticks well and I don't worry about the adhesive sticking to the wood.
@WOODBARK1006 жыл бұрын
Great video! Thank you very much for all the suggestions. I like the painter's tape and glue stick method, it is simple and quick and I understand that the adhesive on the tape helps to lubricate the saw blade which keeps it cool.
@MakeCrazydays9 жыл бұрын
I've found the few scroll saw projects I've done wind up pulling the pattern up off the material when just using spray adhesive on the paper and applying it directly to wood. I'd be interested in how each of these methods compare when actually cutting and remaining stable.
@MrHarpless4 жыл бұрын
Thanks! straight forward and informative!
@stbeeze5 жыл бұрын
Great tips, thanks for sharing your techniques.
@younghavoc923 жыл бұрын
PRESS AND SEAL!?? I’m trying that tomorrow!
@donforsey95098 жыл бұрын
I use clear packing tape on my wood then I use the same 3M 77 spray adhesive as you did to attach my pattern. The smooth plastic tape surface also works as a lubricant for your scroll saw blade. Hope I was helpful.
@wonderwoman24004 жыл бұрын
Thank you!! This is going to help me so much!!
@SwinginJohnson746 жыл бұрын
Excellent and informative video too btw. Thank you for sharing.
@elizabethmingeram961611 ай бұрын
Very helpful.Thank You
@alexandremarques24014 жыл бұрын
Thank you for this amazing and useful video
@barryparks46895 жыл бұрын
Every useful information. Thanks a lot!
@thomasbradley486811 ай бұрын
Thank you for the good idea's 👍 😊
@nicobogaard23154 жыл бұрын
For small pieces I use the direct glue with the gluestick. It sands of easily or I put the piece between a damp cloth. The glue from the gluestick gives way in about 20 minutes. You have to clean (or sand) afterwards. I am experimenting with the painterstape and sprayglue. Mainly because both are inexpensive and they work very clean. With the gluestick and damp cloth method you have to wait until your piece is totally dry before applying a finish. When sawing a lot of items (like christmas tree ornaments for the grandchildren) I choose the gluestick, when working in batches wet ‘stuff’ is’nt that of a problem and it works fast in applying the pattern.
@frankorona19 жыл бұрын
Wonderful tips, thanks.
@Kandiebhenry4 жыл бұрын
I use painters tape and glue stick works great for me,but I also put clear packing tape over my pattern after I glue it so It helps keep from splitting the wood
@jennifercousins96036 ай бұрын
Does the adhesive from the tape or the glue cause your blade to gum up?
@juliedeane95418 ай бұрын
If you’re not going to scroll it will the acetone method eventually rub off your wood?
@riversidema7578 Жыл бұрын
Masking tape (blue painters tape is getting expensive!) and for smaller projects I get FedEx labels to print on.
@SCWD_US6 жыл бұрын
ROFL!! Talk about thorough! Is there any other transfer methods that you missed?
@pinkcheckers3 жыл бұрын
Learning tips before I start. K so with the paper glued on the board, does the paper rip when cutting? could that happen with a dull blade or if the glue isn't dried enough?
@designsbyphilip5109 жыл бұрын
I normally stack cut and use painters tape to hold the sheets of wood together..then use super 77 to glue straight on...still need mineral spirits to get it off portions of rhe wood not covered in painters tape.
@jay_jantra77837 жыл бұрын
Great video👍🏻👍🏻
@angelabrown29576 жыл бұрын
Any suggestion on attaching a large ( 4 feet long ) name pattern on to wood so it doesnt fall apart half way thru the cutting process .
@mahtoosacks7 жыл бұрын
By a soft pencil, he means something in the range of the B's. 9B is the softest I've found in the derwent pencil brand that he was using. HB is the middle of the road normal pencil hardness. Higher number H's are harder, provide crisper lines, but are very light in terms of value, but hard on the paper and can gouge it. #themorethatyouknow
@tsuchang19 жыл бұрын
I like using the blue or green tape.
@dodit51157 жыл бұрын
thank for sharing
@visamishra40093 жыл бұрын
Very useful video
@brianmagnusson74984 жыл бұрын
Hi new to the channel I’m just wondering what would be a good website to go to to order Blades for scroll saw with a big selection thank you
@RussellsWoodShed8 жыл бұрын
I prefer the painters tape and glue stick method.
@otherallies5 жыл бұрын
Is school glue and stick on glue safe for wood?
@peterwoods97568 жыл бұрын
I spray both the pattern & wood then glue directly to wood, mineral spirits soon gets rid of the pattern when finished.Can't get any easier than that.
@oldpath73576 жыл бұрын
I use the old prison tattoo system sometimes....use the cheap gel under arm deodorant applied direct to wood...place pattern face down and rub to transfer the ink to the wood. This works better on light colored and blonde wood.
@alfredwaters92714 жыл бұрын
I use 32in tv trace on paper cop and trac on wood carbon steel
@josecamargo2278 жыл бұрын
My method that work is diluted with water for every 100 grams of white glue PVA 30% of water pass with brush on wood and paste the printed follha.
@SwinginJohnson746 жыл бұрын
Are there paper types better then another?
@ScrollSawVillage6 жыл бұрын
I just use regular copy/printer paper.
@estuber17 жыл бұрын
I find that xylene works better than acetone.
@ultravioletturtle76924 жыл бұрын
LOL boomers never herd of computers LOL. You just buy a saw and load the image into photoshop and it cuts it LOL. These boomers are so funny, welcome to the 21st century