The Crockers I’m sure Chip will be on this thing soon . So you’ll have to tell Dale to be ready 😆😆😆

Same here man same here , I make sure to do things like this with my son . Need to get a good car to restore

Yes I lucked out in the price for sure

Priceless for sure 😊

Thanks bud , yes my son can’t wait to get into it and break it out mean ride it lol

@@SunnySlopeHomestead hehe that's what sons are for and what dads are for 😁

Amen to that ! Like I said it got somebody by 👍👍

He love this stuff but I need to step back and let him make mistakes , it’s hard lol

Woh woh easy there she still a hunk of crap lol thanks

@@SunnySlopeHomestead Pinocchio still lives!

Yes he worked hard on it , thank you

Oh no we can’t be wasting any MD 20/20 😆 thank you

@@SunnySlopeHomestead - No MD here. I gots the genuine boxed crisp wine. Just saying. LOL

Yes !!! My son a is itching to learn how to ride it 😁

That’s awesome to hear ! We about to start a truck project here soon 👍👍👍😆

Yes for sure , I’m sure my son will brave his self into a higher gear each day lol

Awesome

Oh it’s his to put a beaten on now but first I have to show him how to ride it

Wow bet they got PAID lol but it sucks watching land go like that

It's mostly timbered lands near Truman Lake that are going to be used for products testing, wildlife studies, and programs for veterans to hunt and fish.

👍👍👍 thank you , my son is stoked to learn how to ride

Thank you 😊

Thanks brother 👍👍👍

It was painful and awesome lol

It was a night and day difference , love doing this kinda of work

Thank you , we are about to start restoration of a Chevy truck

I’ll know better next time. First time doing seat and it was a pain lol 😆

Thank you , we have two trucks we’re gonna start this winter and we can’t wait 😊

Sunnyslope Homestead sounds awesome! Good luck!

Yeah it was hard but who really sits on them lol

It is man , totally worth the sweet and blood lol sorry about missing the live stream , worked late

I was thinking the same thing!

For sure thanks

Awesome , it was a blast to build . Hit me up if have any questions 👍👍👍

Sweet , I need to get another project to restore. We sold this one shortly after

Oh man rebuilding these things is all the fun. Taking something rough and used up and turning it back to new is awesome 😎

Agreed 😊👍

Thank you I used the headlights wiring 👍👍👍

I used paint made plastic and just Scott padded it down and painted on thing coats. I used a heat gun to get and sun damage out 👍👍👍

jarv00085 jarv00085 thank you , it’s working good but I’m going to go back to the factory carb once I rebuild it . It will get me by but I don’t think it will be a long term choice for me

Any questions let me know and it’s fun to bring back a piece of crap from the dead 😊

Started today on doing basic stuff. I'm already up against the work of a complete idiot who rounded off the head of the oil drain plug with some sort of impact wrench or air tool ratchet. Just going to leave it in place for the moment until I get a new plug in hand and pump out the old oil. Any advice on the best way to get the oil plug out? The foam air filter was completely deteriorated and fell apart in my hands. Hasn't been replaced in many years obviously. The oil filter was in better shape but way overdue for replacement too. But I haven't seen any metal in the oil yet however I don't have much of it drained out and without getting the drain plug out I can't check the condition of the oil screen. Ordered the two new filters and a replacement drain plug. Going to see what's in the gas tank and lines tomorrow and how the spark plug looks. That should be interesting. Your video convinced me to order a rebuild kit for the Mikuni carb and just work with the carb that's on the machine. Where did you find a Mikuni carb kit, if you remember?

Not yet as I’ve changed oil again and none to be found. Had someone say it was clutch shavings 🤷‍♂️ runs like a beast

We just started unbolting all of it starting with the racks. Wasn’t to bad at all

I drilled the bottom bezels to mount he lights and it all just fit perfect 👍

Oh man I can’t recall but I may have put it in the one of the videos

eBay is all I can say and it’s tough to find good stuff. Good luck sorry I could be more help

Plastic rust oleum from lowes is what I used. Trick is to take your time and light coats

NiLights are the brand and they are cheap and tough , Hope this helps

@@SunnySlopeHomestead How did you mount them? Did they go right into the factory location or did you have to fabricate something?

Throttle issues is all

It’s a 250cc and The light are Nilights 👍👍👍

iwanti a250cc

Thank you and sorry I don’t recall , I sold the thing off soon after the build as it was to much for my son

@@SunnySlopeHomestead no worries. Nice job and keep the bodies coming!

We sold it sorry , my son bought two other ones though. We will be making videos on them soon

😆😆😆😆👍

They are Nilights and are cheap but have good reviews. I can’t say if they are good are not yet as I haven’t put them through hell yet lol

I want some lights like that, do you have a web site where you bought them?

Joe Mollitor they are called nilight on amazon 👍

Rust oleum plastic spray paint 👍

My son can’t wait to get on it and ride

Amazon , I don’t recall the brand name but they are normal small LED lights that I was able to make fit in the the old bezels 👍👍👍 I’ll have to check the brand again

Sarge Life it did big time 👍👍👍👍

Thank you..then that's why I'm going to do to mine..

Think they were 4”

I sanded them down and used spray paint made for plastic. If I had to do again I would try the heat gun trick that takes the fade out. KZfaq restoring atv plastic and there’s all kinds of tricks from bluffing to heating to bring them bake. I jumped the gun and painted them

Thanks a million great job on that quad

I got lucky to pile a cheap pile for sure , let’s hope the motor holds out lol

Amazon is where I bought mine

Ok thanks

Had to widen the front or she would be stupid unstable

@@SunnySlopeHomestead yeah could you swap them? Like left for right? I think they would be right then.

Heading that way bud 👍👍👍👍