150cc GY6 performance upgrades (More parts for the Vento style 150)

Рет қаралды 12,452

11 ай бұрын

Hello Everyone we are back at it once more with some fun filled scoot vids. Today I'm breaking in to more parts for the 171cc built GY6. See below for the parts and links. Thanks for watching and like always don't forget to smash that subscribe button. If you Use the links drop them a message saying Rspec Nick sent you from his KZfaq channel 👌.
Front Brake Pads (Vento Style 150cc Scooters)
www.ebay.com/itm/193035781055...
Rear brake pads (Drum Style GY6 150cc 157QMJ)
www.ebay.com/itm/191992887966...
NCY Super Transmission Kit V2
www.ebay.com/itm/184830891031...
Nibbi Cold Air Intake
www.ebay.com/itm/265980119860...
Gates Power Link 835-20-30 Belt
www.ebay.com/itm/372738156750...
PitMoto GY6 Exhaust
www.ebay.com/itm/155571764018...
Vento,Lancer,Power max 150cc-50cc Black Seat
www.ebay.com/itm/323252204373...
TRS Ankle Biter (Gloss Black)
www.ebay.com/itm/193894070241...
NGK CR7HIX Spark Plug
www.ebay.com/itm/172689109230...

Пікірлер: 79

@teshuvahemmet3036 9 ай бұрын

Thanks for the information 👍

@just4kicks950 11 ай бұрын

Looking awesome dude 🔥🔥🛵. Very impressive, can't wait to see it complete 🎬🙆👍.Salute 😎

@RspecNick 11 ай бұрын

Thank you we still got some parts left but should look fairly decent once it's all done

@juliodiaz4493 3 ай бұрын

That a nice upgrade 👌 i have the same glutch

@TommyWaters-ql5di 11 ай бұрын

That's a pretty rad scooter I like

@RspecNick 11 ай бұрын

Thank you

@user-wk5wy3om7f 6 ай бұрын

wow rolling wrench parts are great

@RspecNick 5 ай бұрын

They really aren't bad I was surprised when I saw it was taida parts

@juliodiaz4493 3 ай бұрын

That oil upgrades is good help the bike doesn't get crazy hot in performance too help

@RspecNick 3 ай бұрын

Only thing ify about the decompression tube is if your oil is slightly over full it will definitely shoot it out at high rpms

@matthewgilbert1765 Ай бұрын

looking good man how do you like the nibbi carb I just got it but I am trying to figure out the jetting

@RspecNick Ай бұрын

I have the kehin carb and the nibbi intake tube. I don't mind them tho the carb is definitely snappy

@leveluplife8585 11 ай бұрын

I want to see that NCY coil pack upgrade on there. It should help with low end grunt and mpg which you may need with that taller rear gearing!

@leveluplife8585 11 ай бұрын

Also an Iridium spark plug, almost forgot!

@RspecNick 11 ай бұрын

@@leveluplife8585 not sure if the NCY direct ignition will work with a DC setup tho. I do already have the plug NGK CR7HIX

@leveluplife8585 11 ай бұрын

@@RspecNick I’m pretty sure it will work with DC setups, but I hear the most important thing is the iridium plug if you’re trying to be cost effective

@RspecNick 11 ай бұрын

@@leveluplife8585 I was just told that the NCY red/yellow cap coil is better then the direct ignition so looks like I'll be going for that one instead of the direct ignition one. Definitely gonna take the advice from someone who sells and uses them on a daily.

@amyhazelvang7198 4 ай бұрын

Hows everything now with the updates? How about the clutch with the yellow and blue springs work out any gains. Did you end up changing the final gear? Thanks

@RspecNick 4 ай бұрын

So far runs solid the springs definitely loosened up a bit from the crazy high revs. So far I went 2 teeth lower gearing and it seems with one step lower then OEM with 11gram rollers I can max out in full tilt at about 78mph. Which on a scooter feels like it's moving.

@jonathansosaya8853 2 ай бұрын

Your cvt case is short or long case? If is short case where you got it from? Thanks

@RspecNick 2 ай бұрын

Long case 150cc it came on the scoot

@juliodiaz4493 3 ай бұрын

What sup bro i have a 150cc ex sport edition my gy6 150cc is fast 🔥 📛 👨‍🚒

@shorejiggingreunion6893 9 ай бұрын

Which jetting are you using in your PWK26

@RspecNick 9 ай бұрын

120 main and 32 pilot

@johnnygoni7402 2 ай бұрын

I just bought a 150cc Italica Rx Armor 2022, I am heavy 260lbs and 6'4" currently reaches 40 how can I make it reach 60 at least, which will be my first mod?? Thanks.

@RspecNick 2 ай бұрын

I'd do the basics first I'd check the variator for a washer which restricts speed usually in the middle of the variator. You can also swap the variator weights and belt to get a slightly better top speed

@johnnygoni7402 2 ай бұрын

Thanks for the input, which weight 11 maybe?? I live in Florida

@RspecNick 2 ай бұрын

@@johnnygoni7402 most guys your size run 10 gram weights but 11 might be a decent happy medium. I ran heavy weights but I'm also lighter by 100ilbs

@juliodiaz4493 3 ай бұрын

I wish wasn't raining soo i could go ride?

@fuwaldaVL Ай бұрын

What jetting do you recommend for this same pod filter, exhaust and carb setup as yours but with 150cc

@RspecNick Ай бұрын

I was on a 118 main and 38 pilot. So I'd start at like 108 and 36

@fuwaldaVL Ай бұрын

@@RspecNick aw man i dont have a 118 unfortunately

@RspecNick Ай бұрын

@@fuwaldaVL a jet kit is fairly cheap on eBay I'd just grab a pack its probably like 10 bucks for a set of like 14 jets 7 mains and 7 pilots

@RspecNick Ай бұрын

@@fuwaldaVL what kind of carb do you have?

@fuwaldaVL Ай бұрын

@@RspecNick just ordered the same one as in the video but 26mm. I looked on reddit and they said it should be running good on 115-120 and 34-38 just gotta play around with it. Also how did you do the airbox delete because theres a hose coming out of the airbox and idk what to do with it.

@briansegarra9312 9 ай бұрын

Did you had any issue with that carburetor and manifold, i have a very similar carburetor anf manifold qnf my carburetor keeps touching the engine mount :( i put anf extra spacer and it fitd better but still it its scratching my carburetor and engine mount

@RspecNick 9 ай бұрын

The uni filter on mine the filter rubber base actually sits in it nice that's also on a 320mm shock set. It could be the intake manifold your running as well some stick out slightly further.

@briansegarra9312 9 ай бұрын

@@RspecNick i dont have an issue with the filter its the carburetor itself it seams like the manifold is too long and my carburetor scrapes with the engine mount, i have a very similar scooter carburetor and manifold as yours but i dont see your having that issue

@jonathansosaya8853 9 ай бұрын

Is your case a short case or long case? And whe u bought it from?

@RspecNick 9 ай бұрын

@@jonathansosaya8853 it's a long case and it was already on the scooter.

@briansegarra9312 9 ай бұрын

@jonathansosaya8853 long case came with the scooter and the carburetor adapter manifold from ebay

@user-wk5wy3om7f 6 ай бұрын

¿i need a larger CVT case for installing ncy super transmission?

@RspecNick 6 ай бұрын

What is your engine code?

@user-wk5wy3om7f 6 ай бұрын

i think is qmj157@@RspecNick

@user-wk5wy3om7f 6 ай бұрын

157qmj

@RspecNick 6 ай бұрын

@@user-wk5wy3om7f that will fit fine that's the motor I have in the video

@user-wk5wy3om7f 6 ай бұрын

thanks for your answer, i will waiting for more videos about your gy6 scooter

@itzlando7698 3 ай бұрын

Whens you're next video on this 172cc big bore?

@RspecNick 3 ай бұрын

What are you mainly looking for? I can make videos pretty quickly.

@itzlando7698 3 ай бұрын

Everything honestly i have the same kit n stuff but im wanting to see every upgrade you can do

@RspecNick 3 ай бұрын

@@itzlando7698 so far I have a decent amount of them done. The shock setup I want to switch up tho the rfy shocks now they ride way better then stock but the spring itself on them is thick so once they wear in and get compressed down they rub on the back tire alittle.

@vinnyrider88 Ай бұрын

Does these upgrades really run at 80 mph?

@RspecNick Ай бұрын

79mph with GPS if I tweaked gearing alittle it would be over 80

@vibewitnate8761 4 ай бұрын

Where you get ya throttle from

@RspecNick 4 ай бұрын

Throttle cable came from rolling wrench and the throttle itself came from gy6 store.

@troyholland3436 6 ай бұрын

Is it true bro that these Gy6 150cc bikes don’t last long mileage wise ? Myn just reached 6k miles I’ve heard they don’t last past 10-15k before needing a rebuild is that true ? I take care of my bike I change the oil often just need to put a new air filter on and it ticks a bit when idling maybe the valves are off

@RspecNick 6 ай бұрын

I could believe that honestly I mean 10-15k miles on a high rpm & air cooled motor wears stuff down pretty quickly especially when it's already not very good quality to start with. Most of mine Ive had for a good 10-15k miles but then again I also don't leave them stock long enough to find out. I will find out with my current 171cc tho since I plan I keeping it and I know I already put 1000 miles on that setup.

@troyholland3436 6 ай бұрын

@@RspecNick ya my 150cc has 5900 miles would you say that’s super high ?

@HarveyWallbanger-ho2cq 5 ай бұрын

Yes, the compression drops rather quickly and your top speed along with it.

@troyholland3436 5 ай бұрын

@@HarveyWallbanger-ho2cq the speed is still the same when I first got it you think 6700 is real high?

@ChyNotShyGoated 5 ай бұрын

How fast is it now ?

@RspecNick 5 ай бұрын

Only goes to about 80mph but has alot better acceleration

@MangScoots 5 ай бұрын

fucking love this build dude, I wanna know the overall build price hahha gyaht damn

@MangScoots 5 ай бұрын

bro ur in york PA omg, im in Pa too!

@RspecNick 5 ай бұрын

@@MangScoots yep I'm in York Pennsylvania. Technically east York but thanks and honestly I wanna say in total so far roughly about 3k if I add all of it together including the scooter itself. I put it away for now cause it's a bit cold out lol.

@juliodiaz4493 3 ай бұрын

I know you gotta have a good . gluch 😂😂😂😂😂😂

@RspecNick 3 ай бұрын

Just a ncy clutch lol

@fuwaldaVL Ай бұрын

Hey i sent you a dm