You made the same comment as my sister said.lol :) Your comments always seem to know exactly what I want to show and say~ That's why I love your comments HaHa~ Thank you brother!

@@KAMiJUINs I see you brova! I'm just glad I get to see at least some of your vision 🤙🏼🤙🏼

Thank you for saying that ~ And everything is different from the gear drive of the meepo except it has four gears. (The combination way of the gear box and motor, the bearing mounting method of the gear, the cutting shape of the gear, etc) And if I have a chance, I'll try :)

Thank you so~ much :)

You already know that it only looks like that on video lol :) You know I'm always grateful, right? ~

@@KAMiJUINs 😂 well you do an amazing job again my brother!

오랫만이세요~ 네 까미는 생긴것만 귀엽습니다 ㅋ :)

네 만족스러운 제품이였습니다~ 시청감사합니다!!!

Yeah, It was~ And I hope you get the Gear Drive Experience too :)

네~ 시청감사합니다 :)

Thank you for watching and saying that~ :)

Yeah, just like you said~ This was definitely awesome :)

Looking to hear about the long term durability of the system and the process of replacing internal parts.

@@fujio001maintenance is very easy. I just opened mine recently to clean and add new grease. There's a good video here: kzfaq.info/get/bejne/adlgod2n3eDLiqs.html

yeah, it looks so cool~

구동느낌도 약간 그렇게 느껴졌어요~ :)

Thank you for watching as always too~ :)

HAHA :) Right !!! Thank you for watching ~

Thanks a million, Brother~ :)

Thank you for the good information~

Thanks~ :)

Thank you for saying that~

Thank you for watching :)

Yeah I was waitting for top speed run also. Maybe next ride lol.

Great Video as always. I really like how those tires fit on the wide hubs. Good to see kami running again. Lol. Take care Brosky!

Thank you for watching~ And this was a review of the gear drive only.

Thank you brother~ :) you 2!!!

Thank you~ :)

Oooops - supplementary: I did not mean Meepo (but also offer one in ultra), but Exway in Atlas pro - sorry

Thank you for watching my video too~ And maybe another new technology will be released? :)

@@KAMiJUINs the next step is shown in "back to the future" -movie 😉😂

@@MarkRockShock Actually the gear drive Meepo are offering now looks very inspired by the Newbee drive. Also the Exway too. Gear drives have been around for a while now but were mostly used by DIYers. Now they are being adopted by the mass-market manufacturers.

There is a softness and quietness, but the acceleration curve and braking curve are as intuitive as a typical gear drive.

Thank you for watching :)

It was the regular vertigo.

Thank you for watching ~ And it says for industrial high-rotation electrical machinery.

@@KAMiJUINs Thank for your answer.

일반적인 스케이트 보드 데크를 2장 사용한 것입니다. 검색 사이트에 스케이트 보드 데크를 검색하셔서 가격비교해보시고 구매하시면 됩니다~

Thank you for saying that and according to Korea's customs law, individuals cannot send products with large capacity batteries overseas.

Oh, you're right. I misread the scale of a ruler. Thank you.

200mm (8'') Mud plugger

대부분의 DIY 부품들이 기성품보드들에 사용된 부품들보다 하이퀄리티입니다. 단가도 비싸구요. 아마 기성품으로 만들기에는 판매가를 맞추기 쉽지 않은것이 큰 이유일것 같습니다.

@@KAMiJUINs 어찌되었든 대단하십니다.

이번에 사용한 기어드라이브 상품명이 4GS 입니다.

DIY 보드들은 여러가지 이유로 가급적이면 판매를 하지 않습니다. 그리고 이보드는 입문자용으로 제작되지않았습니다 ㅜㅜ 보드가 처음이시라면 완제품을 먼저 경험해보시고 그 후에 직접 DIY를 해보시는것은 어떨까요?

​​@@KAMiJUINs 스텔라 미니나 미포같은 미니사이즈 느낌이면서 휠큰 보드를 찾는데 딱히 안보이네요 ㅜㅜ 딱 이게 그거다 싶었는데 ㅋㅋ

Those wheels are from Newbee, check the link. www.newbee.store/?spm=..index.header_1.1&spm_prev=..product_dc8af9df-a623-4023-a42d-e9dd669940d4.header_1.1

@@KAMiJUINs thank you!! I msg newbee with my board info to see if it’ll be compatible. Awesome looking wheels

Dw it’ll fizzle out just like direct drives

I also agree with you to a certain extent. However, in the case of this 4GS, there was no significant difference in weight and the drive noise was smaller than that of a belt drive. Each drive has its pros and cons, but what I felt the most from the review is that there are more choices to experience these new technologies on the Esk8. And I think it could be much more satisfying for someone~ Thank you for watching and for your comment too :)

Actually this is quieter than belts. There's a reason why Meepo and others have released similar drives.

I bought both 20mm belt setup, newbee 4GS and Boardnamics M1-AT. The belt setup was the most expensive. 4GS was quietest and the best design.

@@ryanschulz9893 There's already way more usage of gear drives than direct drives. They have already been around for a while now but have mostly been used on higher end boards (e.g. Kaly, Bioboards, etc.) and in the DIY community. It's just that you're now starting to see the mass-market manufacturers like Meepo, Exway, Acedeck, and others adopting them.

Yeah, it's a bit expensive compared to the ones that are released these days

You won't have a long life span either if you ride a board like that with suck a shit and narrow deck

I felt the same way as you when I was not familiar with the material of POM. However, after learning that it is used as a gear material for many electric car companies, I looked for more knowledge about it. Gear made of POM material reduces noise generation and has a lower friction coefficient than metal gear, so there is less heat generation. This eliminates the need to use many lubricants. In terms of durability, it can be said that it has been proven as much as it is used in cars. (They also placed metal and POM gears together.) Thanks~

This design is not like others. A lot of load is spread through the secondary gears. They did a lot of testing including jumping, etc. However of course time will tell. After 3000 km on one set I opened it up and everything looks fantastic. We'll see.

@@KAMiJUINs Hi there, I am very familiar with POM which is nylon as I am an automotive engineer, normal POM is soft as you know from experience of nylon products, ergo this is not normal nylon and is most likely Delrin a very hard form of nylon. Note nylon is highly suseptable to moisture absorbtion (hydroscopic)and thus swelling Delrin being a moderate exception to this rule. Delrin is used more on loading gears, such as light weight mechanisms an example being runners on sliding doors or gearing on moving doors on low duty cycle machinery. POM is widely used on geared system but only generally in things like motorised window winders and other relatively low abuse and low duty cycle parts, a classic example of POM is the toothed gear on a Scalextric ar or RC car, but the difference is they dont pull around 75kg over rough terrain, lets hope they do last buddy would be good if they do....but i have my reservations....fingers crossed

@@AdrianCho The issue is less about load, although this does play a significant factor in it, it is about two fundamental things, material hardness and the abrasion of metal against plastic, as i pointed out hopefully they are delrin, the next is torque inputs, the constant shift of load and torque combined slowly fatigues plastics, you cannot tell by looking, now jumping though it may seem to have bearing is less influential most shock is absorbed by the tyres and wheel, a moderate amount is transferred to the teeth in the drive train, but, despite having done 3000km which in actual fact is very low milage the reality jumping would have constituted only a tiny % of that ride time, and if most was then done on none aggressive terrain like rocky trails etc then loads will have been low to moderate, as far a wear you will be barely able to tell it an certainly not by looking only by measuring changes in back lash, as far a fatigue zero chance of observing it, and this is the issue, once it reaches it fatigue yield duty cycle it will give no warning and simply shear teeth.....however all this being said, if the riding one wishes to do is mainly street and smooth paths then yeah it certainly is a viable option. just seem odd to use plastic when the very same gear would readily be available in metal.

Maybe... Just a bit louder~