#168

Рет қаралды 31,515

Жыл бұрын

Hi all,
All product links are further down 😊 ⬇️.
Here is a video of me explaining some reasons why your Resin may be sticky after curing.
We jump into reasons which may cause these issues including Oxygen Inhibition, which is the most common issue with Photopolymers.
As mentioned, I may have missed some information accidently, I am still learning 😊. Also, I'm hoping the penguins made sense, I didn't want to keep saying scientific words 😂😂😂.
Although I demonstrate these problems using UV resin, the same issues can also be common with 2 part epoxy resin, however, one of the biggest causes of sticky epoxy is inaccurate measuring or not mixing correctly for the recommended time, always measure accurately and mix thoroughly (including scraping the sides whilst stirring) until your epoxy is streak-free and clear. Room temperature can also create issues with curing so be sure to provide a working environment which reflects the recommendations provided in your resin instructions.
You can now be a member of my channel which will give you access to comment badges and also wallpaper of my macro photography. You may need to save these to your device via a PC or screenshot and adjust the images.
Here is my membership link:
/ @daniel..cooper
Thank you to those who have joined 🥰.
A huge thank you to those who have bought me a coffee since my last video, there is a thank you post on the community tab and also to those who have sent a Super Thanks!
You can now also buy me a coffee if you feel the tutorials are helping 😊 ☕
www.buymeacoffee.com/sewedosu
You can also follow my other social accounts here including my TikTok:
linktr.ee/CCCasts Click to see all my links.
Let's Resin Discount Codes:
UK - Use code DanielUK at Checkout.
US - For Resin, Inks, Pigments, Micas and glitters use 10DANIELS at checkout.
US- For moulds and tools etc use DANIELS10 at Checkout.
I now have Amazon Storefronts where you can see most of the products I use. You can order through those Storefronts, otherwise, individual links are further down:
UK Storefront:
www.amazon.co.uk/shop/influen...
US Storefront:
www.amazon.com/shop/influence...
Alternatively, here are the links to the items I have used, if there is no link, there may be stock issues but I will update when they become available again.
I am an Amazon Associate and influencer and I am part of the Amazon Associates Program which means, I earn a small percentage of sales (from Amazon) if a user purchases through my Amazon links:
Why not sign up for a 30 day free trial on Amazon Prime for Free super fast delivery on most products and access to exclusive deals and content :
Amazon Prime Free Trial amzn.to/3Aj7dSQ
Here are the product links 😊:
Mold Tray UK: amzn.to/3ICHrx9
Mold Tray US: amzn.to/41x6omk
Let's Resin Low Viscosity Resin UK: Currently unavailable.
Let's Resin Low Viscosity Resin US: www.amazon.com/LETS-RESIN-Vis...
Here are some great starter kits including a 36W UV Lamp:
UV Resin Starter Kit UK: amzn.to/44Jg7ae
UV Resin Starter Kit US: www.amazon.com/LETS-RESIN-Upg...
Small Mixing Cups UK: amzn.to/3owJ74N
Small Mixing Cups US: amzn.to/3MTBGz0
Dotting Tool Set UK (Equivalent): amzn.to/3JsogIy
Dotting Tool Set US (Equivalent): amzn.to/3Dt8Akf
Thanks for watching and supporting me on my journey 😊
Disclaimer.....
I am fully aware of the risks of working with resin products and aim to give you great tutorials in a safe way. I film in a very ventilated area and keep risks to myself low. I would always recommend you to wear full PPE based on the data sheets for the chemicals you are using 😊😊😊.
Stay safe whilst creating beautiful art 🙏 #resinart #resin #epoxyart #epoxy #resinforbegginers #art #crafts #oxygeninhibition #stickyresin #stickyuv #stickyuvresin

Пікірлер: 365

@daniel..cooper Жыл бұрын

I'm so sorry for using penguins as an analogy 😂🤣

@cathyomalley2772 Жыл бұрын

That's a perfect explanation.

@daniel..cooper Жыл бұрын

@cathyomalley2772 thanks Cathy 😊

@lisaburnham7151 Жыл бұрын

😂 It worked for me.

@MicheleHappyBunny Жыл бұрын

Don't apologise! It helps people to visualise 'penguins! Brilliant video! Thank you!

@Ali-H3444 Жыл бұрын

Brilliant analogy! I visualized a bunch of cute penguins 🐧 looking at me😊

@BeastGuardian Жыл бұрын

I have another tip! If you're working with larger pieces, you might notice your flat pieces will bend and bow. This is due to uneven curing. Set your UV light up at a greater distance from the piece, 6 inches to 1 foot (about 15 - 30cm) away. Your cure time will be longer, but a bit more even. Also, set-up reflective foil or mirrors under and around the mold. I've made a folding mirror box by sticking cheap self-adhesive acrylic mirrors to a folder. This bounces the UV light around so it can hit the resin from more angles than just directly from the light above the mold.

@daniel..cooper Жыл бұрын

Brilliant tips 😊😊😊 Thank you 😊

@vicki3453 27 күн бұрын

😮omg, this is a brilliant tip. I have just made dried flower coasters and top coated them with UV resin and they didn't cure fully. They were sticky. I tried everything. I sanded them. And tried again with the same results... I posted a pleasure for help to the internet and was advised to come to your youtube video. And I fully understand what happened now. I had my fan on towards me as I was curing the UV. My little penguins didn't stand a chance. 😢. Thank you Daniel for your advise and tips. I've been doing resin Art for several months but just started with UV. another learning curve..

@maritarver4588 29 күн бұрын

I think I made each and every one of these mistakes yesterday and decided to quit. After this I think I'll try again. Thanks ❤

@sewlady33 2 ай бұрын

I just did a YT search on "how to fix sticky UV resin" and the first video I watched suggested putting the piece in water. I thought, "Hm. I wonder if that will work, and why does it work?" Then your video was next in line and now I have a better understanding of WHY it works. Thank you so much!

@ellenl5626 4 күн бұрын

The penguin analogy helped me understand! The info in this video was very helpful.

@mikemccormick865 Жыл бұрын

Thanks professor Daniel. This has been the best class on UV resin I’ve ever taken. Thanks.

@daniel..cooper Жыл бұрын

Thanks Mike 😊 Was nervous about this one 😂

@BrandyLaBumbard 21 күн бұрын

This video is pure gold! You’ve just saved my sticky pieces!!! Thank you, thank you!

@VickyShawcooksalot Жыл бұрын

Something I noticed with my nails. Over the next few days, my nails will continue to harden. Also, when I have very pigmented polish, I have to use several layers. That's why some gel polishes seem thin and not heavily pigmented. It's really to ensure that the polish gets a good uv light exposure. Your coverage of uv resin was excellent, Daniel.

@daniel..cooper Жыл бұрын

Thank you so much 😊😊😊

@sabinaveronesi6171 Жыл бұрын

Hi Daniel! Thank you very much for addressing this topic! I am one of those people who abandoned the uv resin a bit precisely because it stuck and the creation ruined and I didn't understand why! 😢With your video I finally realised the problem! 😅Thank you so much !! 👋👋

@daniel..cooper Жыл бұрын

Yay, so glad it has helped Sabina 😊

@tracyharper2121 Жыл бұрын

Thank you Daniel. I was beginning to think I was stupid with UV resin!

@jraydaly Жыл бұрын

I learned this from some girls channel about 2 years back. I was going to give up before I dredged U tube looking for the solution. Works EVERY time now.😊

@Tarni64 7 ай бұрын

OK, so I need to thank you, profusely! I am using UV resin with glitter on a tumbler, so water submersion is not possible (it cures on a tumbler turner) But with your suggestion of a cover, and someone else's suggestion of mirrors, I put a clear bin over top of the turner with the light inside, and some aluminum foil underneath, and it's perfect! Thank you thank you thank you!

@patricialamson7944 Жыл бұрын

Loved that those happy penguins bonded together!! Thanks for the great tips!!💜

@daniel..cooper Жыл бұрын

You are so welcome! 😊

@christinetremblay2353 Жыл бұрын

This is the best UV resin lesson I have ever watch, Thank You So Very Much, you just answered so many of my interrogation ! Take care !

@daniel..cooper Жыл бұрын

Wow, thank you so much 😊

@caregiver55 Жыл бұрын

Thanks so much Daniel, excellent explanation. Something that might help someone; I had an extra nail lamp with a (plain plastic) broken leg, so I snapped off the other one and now use it upside down - under my clear glass platform setup. So I'm using two lamps simultaneously, and don't have to flop the mold over for a second cure. Watch your eyes if you try this, I have a dedicated opaque box that I use over all anyway - just in case.

@daniel..cooper Жыл бұрын

Great idea 💡 Thank you for sharing 😊😊😊

@NinaHansen2008 18 күн бұрын

Thank you, Daniel! I made some little purple and red dinosaurs in a baker’s pink silicone mold, using epoxy resin. I wanted to dome the backs so I used UV resin, but they were sticky. I kept putting them back under the light until they finally hardened up. Then I wanted to coat the tops because the pink mold left a matte finish. But the glitter I had loaded them with also inhibited the curing. Now I understand why.

@estellegerrard8258 Жыл бұрын

This is a super useful video, thank you! When I first tried UV resin, I had a sticky experience which put me off! But I've persevered and watching your videos definitely help! Enjoy your experimental videos and finished creations! Thanks!

@daniel..cooper Жыл бұрын

Thanks Estelle 😊 So glad the vids are helping 😊😊

@shellylinn2672 8 ай бұрын

Thank you for explaining the details of uv resin in a better way! I hadn't thought about oxygen interference nor water curing. You've helped me out of a "sticky situation " 😂😂

@daniel..cooper 8 ай бұрын

Glad it was helpful! 😊🥰

@ellielander4292 5 ай бұрын

My intrusive thoughts with the purple cabochon were like ✨pop it✨ 😂😂😂

@daniel..cooper 5 ай бұрын

😂😂😂

@Copperyfoxx 7 ай бұрын

I just picked up UV resin for crafting today for the first time. Thank you for your tips, you've almost certainly prevented me from making some simple mistakes.

@daniel..cooper 7 ай бұрын

Glad I could help! 🥰

@suewarnes9469 Жыл бұрын

I love the penguins analogy! The water technique is the one that I learnt from you a while back, and on the odd occasion if my UV resin piece is sticky I pop it in water. Ta da! 👍☺️🇬🇧

@daniel..cooper Жыл бұрын

Yay, the penguins made sense? 😂

@sda141 Ай бұрын

Daniel…..what! This was awesome! I wonder if my old sticky pieces can be water cured? I almost gave up I’ve resin work. You are an art angel. Thank you!

@ATREIDESDUNCAN88 Ай бұрын

One way I use to cure is get a white sheet of paper and place the item on it then your light, I have a 4 inch light. Then on top of the loght or around the opening of the light, put white paper. I use index cards. This has made my uv items cure quickly. But i still had issues because of the inks. I found some uv safe or approved inks and they are better. Also perhaps mix your color in the uv resin. Then use the colored UV resin to color your batch you will use.

@Embracetherandom Жыл бұрын

Awesome. I thought it was just me doing something wrong . I’ve tried several UV brands had some successes but frustrated with the sticky losses. Thank you again for sharing your knowledge with us!

@daniel..cooper Жыл бұрын

Glad I could help! 😊😊

@fairyspunfibers9098 Жыл бұрын

@debrakowalski9332 Another tip @daniel..cooper showed us was to pop our sticky pieces into a clear glass/plastic co tainer of water, and shine the UV lamp through that. It works like a charm!

@HannahReyes-g7h Ай бұрын

Sir!!! Thank u so much 😭😭 it was all really easy to understand but at the same time supeeer informative ❤!!! Ty so much!!! 🙏🙏

@pikachuu4379 10 ай бұрын

Thank you so much for this! This is incredible. I have been having this problem for YEARS and I’ve finally found a way!!!! Appreciate it so much ❤️

@daniel..cooper 10 ай бұрын

You're so welcome! 😊😊😊

@Maika-bi5vy 2 ай бұрын

This is a huge help? I've got a sticky piece I will try this on immediately! Thanks!😁

@craftylittlerthings 11 ай бұрын

Oh thanks for this, who would have thought just popping it in water would stop those penguins from shivering!! I’ve saved this tip to my little black book of tips, thank you. Hugs x Ann x

@rosedonnapur Ай бұрын

Thanks so so so mush I new to uv resin and out of 10 pieces I made yesterday the largest one was tackey on top the rest was 2 part and I relized I dint fill it to the top so used uv to fill the 2part was cumply cord. I have a 3drezin coring box so I did it in ther for 4 mins. Came out tacky so I left it in garden all day as its was a lovle hot day in UK. And still nuthing found your vido did the watter trick and it worked ❤❤

@CatherineSummerfield 4 ай бұрын

perfect tutorial Thank you

@OldsouLim73 11 ай бұрын

Thank you for explaining!

@Yummicookie1979 5 ай бұрын

I only use resin to coat my polymer clay jewelry. The very first resin I ever tried was one that just wouldn't fully cure. I decided to figure out why and ,learned about oxygen inhibition. The solution I came up with was to apply a coat of Varathane over the top of my piece and give it one more cycle under the light. I'm glad I discovered this because I had to try several brands of resin before finding one that would actually fully cure. Thanks for sharing. I'm glad to have other things to try in case I have this issue again.

@jacquelinesay1972 11 ай бұрын

Thank you for this tip. Very helpful.

@RHG412 11 ай бұрын

WHOA! That water tip is GOLD!!! Thanks for this video Daniel!

@debraleblanc6122 Жыл бұрын

Incredibly helpful, Daniel. Thanks!

@ccada2023 Жыл бұрын

Great information!

@pikachuu4379 10 ай бұрын

I know this is my second comment but my charms came out so great today!! They used to accumulate so much dust because of the stickiness… thank you so much again sir you have really changed my life😭😭❤️❤️🌷

@daniel..cooper 10 ай бұрын

Yay, so glad to hear 😊

@nmbbeingintentionallycreative 9 ай бұрын

Thanks for sharing so much information about this - I have had trouble with curing uv resin, and have been putting items in the sun when I can; however the last few days have been cloudy here and my uv resin wasn't curing - I am not a science person so your penguin explanation helped. I have given the process of putting my pieces in water and so amazed by this process. Someone in one of the groups I am a part of mentioned about the water and it struck me as very odd - not anymore. Today is another cloudy day here but I can move ahead with my uv resin and know that it won't be sticky when I am done with the whole water curing process.

@kimberlysmith5398 6 ай бұрын

Thank you sooooo much for this! I'm new to UV Resin and you just saved many innocent penguins from the landfill due to my lack of knowledge. 😅 You're awesome!!!!

@daniel..cooper 6 ай бұрын

Glad I could help! 🥰

@swcrafting Жыл бұрын

Great information, thank you.

@JoneeBlair 10 ай бұрын

Absolute genius! Thank you for sharing your wisdom.

@ellishansen8115 Жыл бұрын

Thanks for the great video, and info, D ! You're a gem!

@heidimarcum4631 Жыл бұрын

Thanks for this video! I have been so put off by UV resin because it's always sticky. Thanks to you, I guess I will try again!

@rubymolly2178 11 ай бұрын

Watched this as you suggested. Great tip thank you 😊

@michelleosborne8951 Жыл бұрын

Thank you! That’s an awesome Tip❤️❤️❤️❤️

@tatolevene6168 Жыл бұрын

THANKS! this is brilliant! So helpful!

@1968janbone 3 ай бұрын

Brilliant. Such good information. Thanks Daniel ❤

@stephanieortiz1377 8 ай бұрын

Thanks a lot! You just saved me a custom piece! Used the water curing and it was my solution, Thanks again.....

@daniel..cooper 8 ай бұрын

Glad I could help! 😊😊

@DavidBenbrook-qz8vk 5 ай бұрын

Thank you so much. I have had sticky uv resin and now I know.

@daniel..cooper 5 ай бұрын

Glad I could help! 😊

@janicehoehn8203 Жыл бұрын

That was a very informative class. I have had all of those problems and can now try it again. Thank you to you and the penguins.

@nadineschofield3541 11 ай бұрын

Thank you so much for this video it has been very helpful 😊

@jamiemorris4234 Жыл бұрын

thank you so much for this information. I truly appreciate this and use it!!!!

@hannahshiffman7390 10 ай бұрын

This video was a huge help! These little tricks of yours with the cup and the UV and the water trick helped me with my sticky resin problems! I plan on using these in the future to keep my resin from getting sticky to begin with!

@lovice43 9 ай бұрын

Love your videos. They're so helpful. Thanks so much. Many blessings 🙌🏾 🙏🏾 ✨️

@paulamoore2007 11 ай бұрын

Thank you! I think you might have just changed my UV resin life!

@TerryParker-uu3ci Жыл бұрын

Thank you for sharing this! I've struggled with UV resin. I love your tips and can't wait to try them out!

@daniel..cooper Жыл бұрын

You are so welcome! Thank you 😊

@rosemarypedder5180 Жыл бұрын

Brilliant, thank you Daniel.

@daniel..cooper Жыл бұрын

My pleasure! 😊😊

@Kathrine.R. 10 ай бұрын

Thank you so much for this video! I really want to revisit my UV resin now! 😁

@carolynmozzone412 Жыл бұрын

What some great info! Thanks Daniel!

@daniel..cooper Жыл бұрын

Thanks Carolyn 😊

@Sulzie65 Жыл бұрын

Thank you for this! Helps tremendously.

@daniel..cooper Жыл бұрын

You're very welcome! 😊

@nickyhawkins9637 Жыл бұрын

Thank you so much for sharing all your tips and info xx

@daniel..cooper Жыл бұрын

Thanks Nicky 😊 Hope it helps 😊

@leannemitchem8865 3 ай бұрын

Great video Daniel! Thank you for all you do. ❤

@daniel..cooper 3 ай бұрын

My pleasure! Thank you

@madeleinelaird6951 Жыл бұрын

Thank you for clearly explaining every problem I have with UV resin!

@daniel..cooper Жыл бұрын

You are so welcome! 😊

@patriciaharkin1571 Жыл бұрын

Thanks for all the tips and info Daniel. Very informative.

@daniel..cooper Жыл бұрын

Thanks Patricia 😊 Very welcome 😊

@stiffk666 Жыл бұрын

I've tried water curing on a few sticky pieces before. Some worked, some didn't. The ones that didn't I left on a shelf for 2 weeks, came back to them and they were fine. So even if it's still a bit tacky, don't give up yet. I also started leaving my mixed UV resin in a cheap jewellery box. Some of the deep bubbles when colours or additives were mixed in hard were being tricky. I left them in the dark box for an hour, came back and they were totally bubble free. I can't afford a vacuum chamber so now I mix in advance.

@daniel..cooper Жыл бұрын

Awesome, yes, a viewer mentioned some pots they got from Amazon for this too, I must get some, it would make things so much easier and faster for me 😊

@bobswihart Жыл бұрын

I love that you look into why things happen. You do a ton of research to understand what really is happening. Thank you for doing this and then sharing it with all of us. And the water tip is greatly. Will be using that for sure.

@sandraarnold7528 3 ай бұрын

What a great tip! I never knew you could do that with the water! Thank you 🤩

@marycronin1167 Жыл бұрын

Great tutorial Daniel thank you 🤗🤗🤗

@daniel..cooper Жыл бұрын

Thanks Mary 😊

@mamawise813 11 ай бұрын

Genius tips! I love the penguin analogy 😄. Makes perfect sense. I also love the idea of hiding failed pieces in to larger projects. I will never throw another one in the trash. Seems like a pretty obvious tip NOW! lol. Love your videos and appreciate all the work you put into them.

@annaoram3246 Жыл бұрын

Brilliant, thanks so much, will be trying those tips 😊

@daniel..cooper Жыл бұрын

You’re welcome 😊

@nancymedley623 11 ай бұрын

I have never seen the water trick. I will have to try it. Love your videos.

@mazmain9248 11 ай бұрын

Thanks so much for all the information, I can't wait to try it.

@daniel..cooper 11 ай бұрын

You are so welcome! 😊

@BassResinator Жыл бұрын

Thanks for the info.

@daniel..cooper Жыл бұрын

Any time! 😊😊😊

@mammat5103 7 ай бұрын

What a great tutorial! So much helpful information!! Thank you!

@daniel..cooper 7 ай бұрын

Glad it was helpful!😊😊😊

@StaceyVoss Жыл бұрын

That was awesome. Very clear explanation.

@daniel..cooper Жыл бұрын

Thanks Stacey 😊

@grammymimi7283 Жыл бұрын

Excellent tips! Thanks so much.

@daniel..cooper Жыл бұрын

You are so welcome! 😊

@soniabeale 10 ай бұрын

This is the reason i don't use uv resin much but will definitely will do after this !! Thank you so much 😊

@jacquelynruppert7387 10 ай бұрын

This is the video I been searching for. It is very clear and to the point. I am glad I found it.

@daniel..cooper 10 ай бұрын

Glad it was helpful! 😊😊😊

@mojoe7951 Жыл бұрын

Blooming heck. This was excellent. Thank you for going through all of these for us. Learnt loads here.

@daniel..cooper Жыл бұрын

Yay, so glad it was helpful 😊

@Leena79 Жыл бұрын

Thank you for these tips!

@daniel..cooper Жыл бұрын

You're so welcome! 😊

@wolfgirl-bp9uz Жыл бұрын

I love your penguins they helped in your explanation

@thephotonut55 Жыл бұрын

Very informative and I loved the penguin analogy. Love your videos!

@daniel..cooper Жыл бұрын

Thanks so much! 😊

@SkitchBean_aka_Christine_E Жыл бұрын

Awesome video and explanation. Thanks ❤️ ❤️ ❤️

@daniel..cooper Жыл бұрын

You are so welcome! 😊 Thank you 😊

@pamelagunn1045 Жыл бұрын

Love penguins. Thanks for this video, great tips.

@daniel..cooper Жыл бұрын

Thanks 😊 Very welcome 😊 Hope it helps Pamela 😊

@jannapackard3910 Жыл бұрын

Great info.

@daniel..cooper Жыл бұрын

Thanks 😊

@lisaburnham7151 Жыл бұрын

Great tutorial!😍 My biggest problem has been using to much pigment. I'm always thinking, a little more won't hurt 😂. Another tip, you can't use colored molds.

@daniel..cooper Жыл бұрын

Thanks Lisa, great point, must be translucent 😊😊😊

@-_-_-.... 6 ай бұрын

The more pigment, the more amount of uv light, a a overkill uv light will do the job too

@nilsafaga74 Жыл бұрын

Thanks for a informative video

@daniel..cooper Жыл бұрын

My pleasure 😊😊😊

@mariverhagen8082 Жыл бұрын

This video is so awesome. You really are a wonderful teacher. The analogy makes it VERY EASY to grasp the reasons I've had problems. THANKS so much!

@daniel..cooper Жыл бұрын

Thank you 😊 I was worried about the penguins 🐧 😂

@Prettynotpurrfectcrafts Жыл бұрын

Thank you so much for the water trick, I will be using this from now on

@daniel..cooper Жыл бұрын

Happy to help 😊😊😊

@antonialoysen4223 9 ай бұрын

Fantastic - thanks so much for the water tip - just done it to 3 pieces that were slightly sticky, and da-da, they aren't any more! Brilliant.

@daniel..cooper 9 ай бұрын

Glad it helped! 😊😊

@JoumaPuma Жыл бұрын

thank you very much for the information, I will definitely try the water hack, because as you said Alcohol was terrible with my projects to remove the stickiness, thanks again. 👍👍

@daniel..cooper Жыл бұрын

Very welcome 😊

@tinkerfeet Жыл бұрын

Great video ❤

@daniel..cooper Жыл бұрын

Thank you!! 😊

@karenmoffett9770 Жыл бұрын

thank you for the info

@daniel..cooper Жыл бұрын

No worries! 😊😊

@online-info 24 күн бұрын

Thank you so much 💖

@lindanewcomer830 10 ай бұрын

OMG!!!! Thank You so much for this video! It's just what I needed. I only wish I'd looked for answers a few years earlier. I made memorial beads from my brother's and Dad's funeral flowers and several came out sticky. I think I've used too much pigment in one of my practice pendants so it'll be recycled somewhere else. The clear cup on top worked great with another. I'm not using the same brand you are but have some on order. Thanks again 👍😊

@Letty_88 Жыл бұрын

Man, thanks so much for the penguins! 😆 And for the water trick! Really appreciate you sharing the tips. I just came across your channel today, but you have a new subscriber! I love your work! ❤️

@daniel..cooper Жыл бұрын

Glad I could help! Thanks for subbing 😊🥰

@zarah_hydeist 11 ай бұрын

Thank you so so much for this video! I was about to give up on UV resin altogether because I could never get my colored pieces to cure properly. Definitely gonna try the water method next time!

@fakhr-mussaviheide3634 Жыл бұрын

Thanks so much for the explanation. I am going to use your hints to go on with UV resin. Great video.😅

@daniel..cooper Жыл бұрын

Glad it was helpful! 😊

@callyross4821 Жыл бұрын

oh my gosh! that makes so much sense! I use a fan in my craft room for ventilation, I thought I was being smart. SMH. the small cup is genius. thank you so much for the explanation. I'll do all I can to keep the penguins warm! ;)

@daniel..cooper Жыл бұрын

Glad it helped 😊😊