16kW edf 367km/h JETFAN-130 Odyssey 13kg weight to 18kg thrust 265A Graphene 16s 8Ah TOPRC Jet Sound

Рет қаралды 21,339

2 жыл бұрын

Odyssey TOPRC Model 2,3m
bigplanes.nl
JETFAN-130 PRO
shop.ejets.at/OShop/ViewProdu...
Motor TFL-SSS 56104-700kv
shop.ejets.at/OShop/ViewProdu...
ESC Flier Model 300-400Amps 20s (max 400A)
pl.aliexpress.com/item/129056...
BEC HobbyWing 25A 18s
www.rcfox.de/HW30606000-Hobby...
batteries Graphene, 16s 8000mAh 65C, total battery weight ca 3200g.
www.kostkamodelcentrum.cz/obc...
Servos 21g 10.5kg KingMax KM1203MD run on 8.6V
www.kostkamodelcentrum.cz/obc...
Landing gear JP-Hobby ER120 for Sebart Avanti XS
www.turbines-rc.com/en/struts...
max power ca 265 Amps 16kW
open duct air intake,
exchaust nozzle dia. 114mm
Top speed level flihgt 300km/h, with little diving 367km/h (GPS-Logger 3 SM-Modellbau)
Takeoff weight 13kg
Stall speed ca 50km/h
Transmitter FrSky Horus X10 Express on Open TX firmware.
Receiver FrSky Archer SR10 PRO with stabilisation and full telemetry (amps, mAh, volts, temp, km/h)
AMP sensor in previous video (time 4:05 - 8:04):
• Follow-up Black Horse ...
#namaxa_media
#WojtekBrzozowski
#EDFjetRC

Пікірлер: 71

@FandanGo66 2 жыл бұрын

fantastic, simply fantastic, you have proved that the complicated and very expensive gas turbine no longer makes sense

@djpj54321 2 жыл бұрын

Incredible! The power, the sound, the speed.... Who needs a turbine if you can achieve the same goosebumps with an EDF! Amazing project! 👍

@chrisv-l3835 Жыл бұрын

OMG that sounds incredible. Could not have imagined an EDF could sound like that.

@bumblebeehead1 2 жыл бұрын

Amazing. The speeds,the sounds. Fabulous.

@simonjandrell5897 2 жыл бұрын

thats one of the best sounding rc jets i have ever heard.. mind blowing

@luisdejesus2570 Жыл бұрын

The jet sounds is is more than perfect. Good Job.

@mudpuddle8805 2 ай бұрын

That was the most impressive EDF jet that I have ever seen or heard. The sound is incredible!

@ramonmedina1974 8 ай бұрын

No one has so good sounding EDF like yours! Well done!

@AlvesJone 2 жыл бұрын

Oh god I love this set up and Jetfan too. Thanks for sharing.

@print3dnyc838 2 жыл бұрын

Fantastic!!! Watched several of your videos and your passion and obviois skill is quite commendable! (subscribed!)

@rcplanepirate 2 жыл бұрын

WOW Sounds amazing!

@nathannation 2 жыл бұрын

Another great video! Very nice!

@RcAndries 2 жыл бұрын

Oh man I want this sooo bad! Thanks for all the time you put in to find this setup!!

@EDFjetRC 2 жыл бұрын

Just get the Jetfan130, it is so nice and so strong :)

@RcAndries 2 жыл бұрын

@@EDFjetRC I would have never expected such performance on an EDF that big, love it!

@jinsvi 7 ай бұрын

The sound is amazing

@nighthawk0077 2 жыл бұрын

Top EDF, top setup!

@drrosemountain8328 2 жыл бұрын

Nice Plane, great Pilot, awesome Camera Operator!

@JustEnoughRC 2 жыл бұрын

Beautiful 😍

@wtfmimshag 2 жыл бұрын

Absolutely insane.

@majorhavoc 2 жыл бұрын

Very good job sir 👍

@JoshuaHaghani94 2 жыл бұрын

Legend. Please keep posting! Watching from the USA. I have a 64mm only :(

@simonbonner5419 2 жыл бұрын

Super super nice !

@chrisr4274 2 жыл бұрын

Very nice!!

2 жыл бұрын

I should say: that's insane!! Love it!! LOL

@bobturner3388 Жыл бұрын

GORGEOUS!!! The sound is absolutely the closest thing to turbine sound out there!

@Optimiser113 Жыл бұрын

Sounds more like a jet than a jet!

@ssssss-dl8by Жыл бұрын

It sounds like space ship :D really cool plane

@ghoustanable 2 жыл бұрын

Just as I thought you had the best setup ever on this plane you just had to step your game up brilliant as usual just simply brilliant. By the way did you get me email regarding the 3D printed mesh you used on the Viper for the turbine sound?

@thiagobarreto 2 жыл бұрын

I want it too 😢

@gr8motive 2 жыл бұрын

Holy crap 😲

@MrMAPECU 8 ай бұрын

Wow! Sounds and flys exactly like a turbine. Well done, demonstrates what you can do with electricity 😊

@iwontreplybacklol7481 3 ай бұрын

You have been duped. They are using a high powered directional microphone that applies noises like ASMR. In real life, it doesn't sound anything like this.

@rlake349 2 жыл бұрын

That is impressive but that microphone on your camera is equally good.

@Frequency369 3 ай бұрын

Wow 🤩 super sound and super fast and even more super is your way to do presentation nice and clean in English. I’m Dutch but it’s better to understand then the original English language haha 😜 About the sound of real petrol jets, it’s the impellers what caused the sound and not the burning chamber.

@jedrinck Жыл бұрын

Did you modify the intake to create a more jet like sound? There is hardly any motor noise audible, just a loud whoosh sound which is great. In my experience suboptimal intakes, especially cheater holes perpendicular to the direction of flight, sound great.

@abhinandanmishra534 2 жыл бұрын

Awesome!!! Not expected this performance also Is the flier model ESC good or should I get any other ESC. I am gonna use a 150 a 8s version for hotliner pulling around 120 amps

@edfhobbies556 Жыл бұрын

GREAT FLYING!! I love the way you fly close to the deck were contrast in speed can be seen. What is your efflux from this fan? It has to be sick ... I haven't seen many fans over 200 mph efflux from the fan installed with the thrust tube but to go 200 mph in the jet the efflux has to be around that number or even higher. Thx in advance

@deandagner 2 жыл бұрын

Absolutely amazing! I love it. It sounds sooooooo good. Are you using a sound module?

@EDFjetRC 2 жыл бұрын

No, just pure sound from EDF :)

@deandagner 2 жыл бұрын

@@EDFjetRC that is crazy!! It sounds so real.

@nighthawk0077 2 жыл бұрын

Wow, didnt realize it was open duct. With full sealed ducting 400km/h is possible from dive.

@rcswissflyer9393 6 ай бұрын

What kind of linkage you use on ailerons and flaps servos to hide LDS? Like they use on gliders lately?

@jelleeee19 Жыл бұрын

Hi, I'm planning on using a jetfan 130 pro in my odyssey jet. I'm curious to try out your self designed intake lip. Could you send me the files to 3D print this myself? Also, did you use filament or resin printer for this part? Thanks a lot! Looking forward to test out this setup!

@tomstark7916 2 жыл бұрын

with all Odyseey's on back order in the US what edf jet would you recommend that would like the odyseey?

@tomcallant2278 2 жыл бұрын

hi, my brother remi and me following you a lot, can i ask you a question about a edf fan in combination withe a plan? best regards, tom and remi the flying brothers belgium

@deadstickduck2025 10 ай бұрын

Greetings Wohjek, I could use some guidance... Mine has the JF130pro/56104-650kv and can't settle on 16s3p13500 or 16s4p18000 Molicel P45B cells. I like lots of 67% @120A cruising and the 18000 would be @14kg and give 8-10min. Not sure 3p will stay cool enough even though the plane would be nice and lite.

@tamrynkucera5152 2 жыл бұрын

what are you using to read Mah off the pack ? my radio will only read the volts thank you

@beniaminz Жыл бұрын

How fast will a smaller jet fly with this strong edf?

@anilherrmann1803 2 жыл бұрын

very impressec jet. you often talk about STL files. I imagan you also have a CAD file from your jetfan 130. could you share it to me?

@michaelhannah5376 Жыл бұрын

Hi Can you share info on the Graphene battery’s you used.

@lennartvanopbergen 2 жыл бұрын

Great setup! Any link to how you modified the FAS100S to sustain higher Amps? Watched a lot of your previous videos but wasn’t able to find how you did it.

@EDFjetRC 2 жыл бұрын

AMP sensor in previous video (time 4:05 - 8:04): kzfaq.info/get/bejne/mJd0jad-lqeym3k.html

@wololo10 6 ай бұрын

The HET 800-73 cooked?

@Frequency369 2 ай бұрын

It’s not possible to visit the site for the edf, this because it needs a login.

@beyondxtream4056 2 жыл бұрын

Those speeds and forces with 21gr/10,5kg servo's?? No blow-back or lack of holding power on ailerons/elevator?

@EDFjetRC 2 жыл бұрын

no :)

@anthonyarchuleta9783 Жыл бұрын

Directional mic really enhances the jet sound doesn't it! Wish we all could hear edf like this.

@apexaero Жыл бұрын

I got 212 mph out of a 70 mm on 6s 125a in 2013, home design scratch built balsa/glass/carbon

@iwontreplybacklol7481 Жыл бұрын

Video or i call bs

@iwontreplybacklol7481 3 ай бұрын

To those amazed by the sound, realize they are using a directional microphone that amplifies the quietest sounds making it much better than it actually is.

@piotrburnus8794 Ай бұрын

POLSKA GURRRRĄ🇵🇱

@MrNcharly 2 жыл бұрын

What's the New Price all inkl. for Rady to fly?

@nighthawk0077 2 жыл бұрын

Least most relevant question.

@Toth_Marton Жыл бұрын

lol

@andreaslangner6621 Жыл бұрын

Great Plane ,i think the effency isnt very good.My 90mm have 3.2 Kg of thrust at 108 Amps and 6s. A 130mm Fan must have a thrust between 20- 25 Kg of thrust at this power consumption.Try different EDF Motors and see what happen.I testet 5 Motors to find the optimal performance .

@edfhobbies556 Жыл бұрын

What's the efflux of your 90mm EDF? Thx in advance Efflux or exit air speed out of the thrust tube installed is a pivotal factor in jet performance,. To go over 200 mph hr the efflux of the EDF in the video most likely is over 300 mph. The static thrust of an EDF can be high and Efflux speed be low the model will go the speed of the low efflux but get there quicker.

@seany11244 Жыл бұрын

@@edfhobbies556 Looking for the answer to this question also.

@ninjor8415 3 ай бұрын

@ kzfaq.info/get/bejne/q79gf9yds7a1gps.htmlsi=e4XP-oC0ZNyLJQg7&t=554 He says in previous videos he show how to make it read more amps? Anyboyd know which video its in? I cant find it!?

@wololo10 6 ай бұрын

Mas sand that lip come on