#180
Рет қаралды 1,339
10 ай бұрынVery badly treated - is it worth to restore it?
Part 1: • #180 Simpson260-Series...
Part 2: • #181 Simpson260-Series...
Part 3: • #182 Simpson260-Serie...
My other (1st) Simpson260
Part 1: • #62 Simpson260-Series7...
Part 2: • #63 Simpson260-Series7...
Part 3: • #64 Simpson260-Series7...
More infos: www.simpson260.com
@electronicsoldandnew 9 ай бұрын
That’s a great meter, but you’re right: there are a lot of idiots out there messing with stuff they should leave alone. Good job, and thanks for the video.
@dl7majstefan753 9 ай бұрын
Thanks dr Manuel
@Destroy_Communism 9 ай бұрын
My first 260 has been with me since 1971. Most work doesnt need DVM accuracy. Most 260’s I have found on Ebay are beyond saving from battery leakage, so I stopped buying them. 5 is enough.
@dl7majstefan753 9 ай бұрын
So i´m a poor guy - i have only 2 of them....hi.
@montygore1200 10 ай бұрын
I have repaired many of the Simpson meters for a company I worked for. I loved these meters. They were the best before the dvm. I still use one when I need to check a circuit with possible oscillation when my scope is not handy. Thank you for another excellent video. Your video recording is superb.
@dl7majstefan753 10 ай бұрын
Fully agree with your comments regarding use of analog meters
@WECB640 10 ай бұрын
I suspect a cold beer is needed at the end of part 2. Stefan, I enjoy your humor and wit. "There is a bunch of idiots outside." Who puts diodes in backwards with jumpers and mistakes a 22 ohm with a 22K resistor? LOL Oh, if only this meter could talk! It would make a great story and perhaps a movie. 73 OM
@dl7majstefan753 10 ай бұрын
Yes, right!! It´s cruel sometimes but it creates the possibility to acquire a good meter at low price...hi. But maybe the resistors where burnt and the printing was unreadable - but a schematic is available in the net.
@davidv1289 10 ай бұрын
Well done, Stefan. Another instrument on its way to a second life. Yes, it has to be said, there are some idiots out there. Hopefully this idiot has learned a lesson - look but don't touch! I look forward to the alignment and upgrades. Regards, David
@dl7majstefan753 10 ай бұрын
Yes and the mount trash grows a little bit slower. But i don´t think that the guys who should watch this video are watching it. Only the guys who knows what to do are watching this.
@oe6kyg 10 ай бұрын
immer wieder ein Genuss 73 klaus
@dl7majstefan753 10 ай бұрын
Danke!
@cbiz8 10 ай бұрын
Stefan, the last adjustment have been done with the instrument in horizontal position, right? Mein Englisch ist nicht sehr gut :).
@dl7majstefan753 10 ай бұрын
All alignments have been done in vertical position. But i only said they should have been done in horizontal position
@montygore1200 10 ай бұрын
I agree, too many idiots. I was an rf tech and I have ran into a lot of the idiots repair attempts.
@dl7majstefan753 10 ай бұрын
But without those idiots we would have less interesting projects.....hi.
@anandarochisha 7 ай бұрын
Surplus from Mar-a-Lago ?
@dl7majstefan753 7 ай бұрын
No, internet platform
Jason Derulo
Рет қаралды 119 МЛН
Learn Electronics Repair
Рет қаралды 222 М.
w2aew
Рет қаралды 19 М.
Тима Бичевский
Рет қаралды 1,7 МЛН
😍 Таких шикарных и гибких телевизоров, тем более за такую копеечную цену вы больше нигде не найдете.
Любимый WB
Рет қаралды 3,2 МЛН
MaviGadget
Рет қаралды 1,2 МЛН