No video
1851 Beaded Fringed Holster Leather Project
Рет қаралды 1,769
2 жыл бұрынJust going by a picture sent to me by Santee @ArizonaGhostriders, I'm going to attempt to make a similar holster for my 1851 Navy. Made just like a traditional "Slim Jim" style holster, except the upper half is covered in a fringed suede and adorned with 2mm seed beads for a traditional Native American look-ish.
Much of my leather and other assorted tools have been purchased at Weaver Leather Supply: www.weaverleat...
2mm Seed Beads Amazon: amzn.to/3Hjgspb
120pcs Bronze Nailhead Round Dome Studs Amazon: amzn.to/39mOk8g
Check out some of my favorite channels dedicated to the "Old West" and other firearms related stuff!
Arizona Ghostriders
/ @arizonaghostriders
Guns Of The West
/ @gunsofthewest
Chuckin'
/ @chuckintv
Squib Load
/ @squib1911
@ArizonaGhostriders 2 жыл бұрын
Excellent work. I guess now I have to do some beadwork to mitigate my guilt!
@SmallCaliberArmsReview 2 жыл бұрын
It'll test your patience!
@Rick_Sanchez_C137_ 2 жыл бұрын
@@SmallCaliberArmsReview larger beads, are easier to work with, take less time and fewer holes in the leather, and test the patience less…. Just sayin’.
@SmallCaliberArmsReview 2 жыл бұрын
@@Rick_Sanchez_C137_ using the small ones has really taught me to have more patience than I used to, plus they look better I think.
@Squib1911 2 жыл бұрын
That was A LOT of work. Glad you saw it through.
@SmallCaliberArmsReview 2 жыл бұрын
Yes, but it was fun too! Thanks for watching Squib!
@TiroeRicaricaWestern 2 жыл бұрын
Hello Richard, nice video and holster! Thanks for sharing the experience on making one like this, I always liked that kind of holster and your looks very good! "Sometimes you need an outfit to go with your holster, especially with Cowboy guns!" I definitely agree!!
@SmallCaliberArmsReview 2 жыл бұрын
Bruce, you always have the right outfit for your gear! I always enjoy watching your videos, even if I don't understand every word! Thanks for watching!
@danielpollard3969 2 жыл бұрын
Nice for the first time beading . Nice holster for a first time.
@SmallCaliberArmsReview 2 жыл бұрын
Not my first holster, but the first one like this. Thanks for watching!
@gijoe508 2 жыл бұрын
When you got to the gluing part I was like, how is he going to sew the tab on the back… then I got to the part where we found out how. Oh well, looks good in the finished form
@SmallCaliberArmsReview 2 жыл бұрын
You should have said something to me! Oh, wait, nevermind. I was just excited to get the thing sewed up and it completely slipped my mind. Thanks for the compliment and thanks for watching too!
@joemorganeatmyshortschannel 2 жыл бұрын
This is a cool project
@SmallCaliberArmsReview 2 жыл бұрын
Thanks Joe!
@joshuagibson2520 2 жыл бұрын
I good with machining and presses, but I've never had the patience for this type of work. I still respect it though. Good work on that holster.
@SmallCaliberArmsReview 2 жыл бұрын
I think the older I get, the more I enjoy it. Thanks for the compliment and thanks for watching!
@jerseyred9554 2 жыл бұрын
Outstanding project Richard
@SmallCaliberArmsReview 2 жыл бұрын
Thank you! I greatly appreciate it!
@Eric_in_VA 2 жыл бұрын
I really enjoyed this holster build. it came out great!
@SmallCaliberArmsReview 2 жыл бұрын
Thank you, I really appreciate that!
@johnt.chambers4204 2 жыл бұрын
Nice job. I might try one myself. If I do, I think I will also stitch a piece of suede in with the welt so it will have fringes down the edge as well as the skirt. I've never done any bead work either, but I really like the look on this one.
@SmallCaliberArmsReview 2 жыл бұрын
I'd like to do another one soon and I plan on doing the suede a little different so it will cover a little better. Thanks for watching and don't forget about the belt loop!
@charlescomly1 2 жыл бұрын
Great job friend, one of my favorite hobbies is making holsters and gun belts, after seeing you make this Im feeling the urge to try making one like that too.
@SmallCaliberArmsReview 2 жыл бұрын
Go for it! Don't forget the belt loop!!!
@Gunsmith-4570 2 жыл бұрын
Well done, like I have learned, if I don't tell anyone no one else see's the mistakes. No I did not see yours either, although I tried to scream belt loop several times. Really beautiful work and always something new.
@SmallCaliberArmsReview 2 жыл бұрын
Scream louder next time, I didn't hear you! Lol. I just had one of those moments where I was excited about getting the thing closed up and it completely slipped my mind! Thanks for the compliment and thanks for watching!
@Gunsmith-4570 2 жыл бұрын
I like the fringe. Beads on the fringe maybe overall very nice. Thanks for the video.
@SmallCaliberArmsReview 2 жыл бұрын
Thanks for watching!
@BlackPowder99590 2 жыл бұрын
It’s always great when I see you’ve posted a video! Your videos are inspiring and encouraging!
@SmallCaliberArmsReview 2 жыл бұрын
Thank you! My biggest goal when I do a leather video, is to show people that anyone can do it. Thanks for the compliment and thank you very much for watching!
@jasonjoslyn4294 2 жыл бұрын
Looks good I will be waiting on mine
@SmallCaliberArmsReview 2 жыл бұрын
Thanks, I wish I could make holsters full time!
@genebrading969 2 жыл бұрын
Sweet another project to work on
@SmallCaliberArmsReview 2 жыл бұрын
They're always lots of fun! Thanks for watching!
@sasquatch885 Жыл бұрын
That’s a great looking holster!👍🏻
@SmallCaliberArmsReview Жыл бұрын
Thank you!
@swhedge71 2 жыл бұрын
Nice job Richard! I know you only do this as a hobby, but, your finished products are always amazing! Thoroughly enjoyed this, just like all of your other videos! Cheers!
@SmallCaliberArmsReview 2 жыл бұрын
Thanks! I'd love to do it full time but I don't have near enough experience to make a go of it. Maybe by the time I retire I'll be able to hammer out the old west rigs for a little extra cash! Thanks again for the compliment and thanks for watching!
@mikethomas5412 2 жыл бұрын
Beautiful. You did a really good job.
@SmallCaliberArmsReview 2 жыл бұрын
Thanks, I appreciate it!
@laksivrak2203 10 ай бұрын
Awesome holster
@SmallCaliberArmsReview 10 ай бұрын
Thank you!
@tymemachine5179 2 жыл бұрын
Great job and great video
@SmallCaliberArmsReview 2 жыл бұрын
Thank you!
@mccalltjtm 2 жыл бұрын
Very Nice!
@SmallCaliberArmsReview 2 жыл бұрын
Thank you!
@williammccaslin8527 2 жыл бұрын
An here I thought you were the leather master, aka the guru of Tandy, the god of bovine, lol. No I know your human, just like the rest of us, but you do good work, an not bad for your first time doing beading. Maybe you could take a toothpick an put a dab of epoxy glue under the beads that want to twist, just a thought to hold them in place where there stressed. Never tried beading myself, but your a better man than I am for giving it a go. Thx for the vid Richard
@SmallCaliberArmsReview 2 жыл бұрын
Thanks William! Ha! I have other holsters that I screwed up, I just didn't do videos on them yet! I'm just going to leave it like it is so I can have a reminder of what not to do. Ge your glasses out if you want to try beading, them things is tiny! Thanks again for watching! P.S. you forgot the Wizard of Weaver! Lol!
@Tammy-un3ql 2 жыл бұрын
Nice job👍👍👍👍
@SmallCaliberArmsReview 2 жыл бұрын
Thanks 👍
@tomstepanowicz6191 2 жыл бұрын
🙌Yeah Richard
@SmallCaliberArmsReview 2 жыл бұрын
Lol, thanks Tom!
@tomstepanowicz6191 2 жыл бұрын
@@SmallCaliberArmsReview you are welcome
@aaronmiles8286 2 жыл бұрын
Great wrk 🤙
@SmallCaliberArmsReview 2 жыл бұрын
Thank you!
@JimE6243 2 жыл бұрын
Excellent work........... again Richard. Looks great. The beads look good from afar..... here in TN. You should be proud. How many hours do you have in it? JimE
@SmallCaliberArmsReview 2 жыл бұрын
Just guessing JimE, since it was split up over a couple weekends, I'd say about 10 hours of actual work. Probably more but the next one will hopefully be better and faster.
@Rick_Sanchez_C137_ 2 жыл бұрын
Good looking project. Are you gonna put the two holsters on the same belt despite the holster difference, or does each holster get its own belt? Looking forward to the final results…
@SmallCaliberArmsReview 2 жыл бұрын
I hadn't really planned to make a belt for the 1851 holster, hmmmm....
@davidbratcher9822 Жыл бұрын
As usual, beautiful work. What was the larger of the two stamps you used? I want to try all this stuff now. DB
@SmallCaliberArmsReview Жыл бұрын
The larger one was from Tandy Leather F916, only about $7. It can lead you down the rabbit hole but it's a lot of fun. (sometimes frustration too) Have fun and thanks for watching!
@davidbratcher9822 Жыл бұрын
Thank you. I'm going to make a Bowie knife sheath like this. Then a holster. Fantastic
@jayclark7237 2 жыл бұрын
In what previous video did you feature that 1851?
@SmallCaliberArmsReview 2 жыл бұрын
The second generation Colt. I fired the Pietta instead of the 52 year old, unfired, Second Generation Colt.
Small Caliber Arms Review
Рет қаралды 3,6 М.
Small Caliber Arms Review
Рет қаралды 5 М.
Road Agent Leather
Рет қаралды 22 М.
Craftsmanship Process - SUIGENKYO
Рет қаралды 1,9 М.