1930 Ford Model A coupe- Did I blow the motor??

Рет қаралды 47,258

2 жыл бұрын

Gandalf the Green Coupe is the victim of this video. Is the motor blown up? Why is the office of air resources so interested in this car suddenly? I'm going through the VGG style basic steps to find out if this newly rebuilt motor is healthy or junk. Follow along as we bring Gandalf the Grey Coupe back to life! Paul Shinn's KZfaq channel- kzfaq.info...
Link for that head lamp I talked about- odelfi.com/discount/PAULSHINN... Use coupon code PAULSHINN and get 10% off!
If you don't want your Model A to break down, just subscribe! kzfaq.info...
For those who are CONSTANTLY on my case about calling the "engine" a "motor", here is the definition of the word motor-
mo·tor /ˈmōdər/ noun
"A machine, especially one powered by electricity or internal combustion, that supplies motive power for a vehicle or for some other device with moving parts."
Remember- The Model A team of experts is ready to answer your Model A technical questions! ModelAtechquestions@gmail.com
"I AM THE WARRANTY" shirts- amzn.to/3zj7yZ1
How to buy a Ford Model A- • Ford Model A Buyer's G...
What motor oil to use in a Model A- • What motor oil is best...
How to shift the Ford Model A transmission- • How to shift gears in ...
How to check and change fluids in Model A- • How to check and chang...
How to lubricate a Model A- • How to lubricate a For...
How to do Model A front end alignment- • How to align Ford Mode...
How to set the timing in a Model A- • How to set Ford Model ...
How to properly adjust Model A brakes- • How to adjust Ford Mod...
Ford Model A daily driver- • Daily Driving a restor...
Why the Ford Model A is the best American car ever made- • They call it the "Best...
www.PaulShinn.us
"I AM the Warranty"
You've found the Boomerest car channel on KZfaq!
#paulshinn

Пікірлер: 314

@vayabroder729 2 жыл бұрын

This is real life my friend and we appreciate you for everything you do; your knowledge and sharing your journey; even the setbacks. Love my Wednesdays and Saturdays with you and Tina. God bless you guys!

@ModelA 2 жыл бұрын

Thanks Vaya! God bless

@patriciastafford4335 2 жыл бұрын

@@ModelA o

@kennethswain6313 2 жыл бұрын

The head lap is the best light I’ve seen. Your patience is amazing. Thanks to both T &P!

@ModelA 2 жыл бұрын

Our pleasure Kenneth!

@deanjernstrom3760 2 жыл бұрын

Another great journey from Mr Shinn. So now Ive picked up more great problem solving methods.Cant wait to see the outcome. Till then may the MODEL A GODS BE WITH YOU!

@johnkropp6850 2 жыл бұрын

Hey Paul and Model T thanks for taking us along with your problem solving. Even though it doesn't always play out the way you or we planned. Good idea drowning your sorrows in ice cream, I would definitely done the same. Keep up the great videos!!

@ModelA 2 жыл бұрын

I seem to be consuming a lot of ice cream lately...

@paboot 2 жыл бұрын

Those head lights are wonderful. My wife found one for me, and I bought it about 6 months ago. It is so helpful around the Vicky. Keep up the great work. You are the one to watch for any Model A info. Most of our Lion’s Gate Model A Club, up here in British Columbia, talk about how informative your videos are. Paul

@ModelA 2 жыл бұрын

Thanks!! Please tell them I said HI

@paboot 2 жыл бұрын

Will do. Going to see most of them at our big swap meet this Friday,Saturday. Quite a few Americans also come to buy and sell as well. God bless to you and Model T.

@jayoneill1533 2 жыл бұрын

Great trouble shooting tutorial, thanks Paul. Listening to Gandalf cranking away as the battery slowly dies without a hint of starting certainly brought back a lot of frustrated memories !!

@ModelA 2 жыл бұрын

Hahaa!!

@RCHart Жыл бұрын

Thank you for the details of this video, just what I needed. My ‘31 GATOR A has been sitting too long and neglected , so I am having to trouble shoot in getting it running smoothly again. I have not been a mechanic for most of my life, but that is why I love working on A’s, they are somewhat simple. The current stage of draining the gas tank and trying to remove and install a new shut off valve (not easy so far). Then on down the line to the carburetor. Watching you and Ms. T diligently working on the A’s is very encouraging! For me it is family time with the son-in-law & grandson!!

@ModelA Жыл бұрын

That is so cool. Keep it up man!

@johnnyrocket6588 2 жыл бұрын

What a great way to start my Saturday morning. Have a great weekend Paul.

@ModelA 2 жыл бұрын

Thanks Johnny!

@goodbyecalifornia3567 2 жыл бұрын

Hi Paul: absolutely love the channel, I’m learning more about these awesome cars everyday. I’m the guy in Hawaii that acquired my dad’s 1930 Tudor sedan deluxe and we had our 1st car show yesterday…she took best of show out of about 30 cars! I also met some other collectors in my little 4000 population town. We had lots of fun and looking forward to more videos and car shows in the future. Aloha

@ModelA 2 жыл бұрын

Great work, man!

@stephenhenion8304 2 жыл бұрын

Old Cars can be very very tricky ⚙⚙⚙ Great work and its always fun to hang out with you Paul👍👍

@craigpennington1251 2 жыл бұрын

I too had a car once that fought me at every turn. Ice cream does make your day go better. Another great video. Best wishes on the start up of Gandalf. Storming like crazy here. Looks to be good weather there.

@leebarker539 2 жыл бұрын

A delightful video in every way. Thanks for your thoughtful, easy-to-understand narration. You and Derek set a very high standard and few others come close.

@ModelA 2 жыл бұрын

Wow, thank you!

@Dan-qy1rg 2 жыл бұрын

Well wishes for you Jack Bahm, hope you get to feeling better! I'm very intrigued with the reason for the oil and starter rebuild. I have one to rebuild myself, but it's been maybe 40 years since I've rebuilt one, a refresher would be nice. Good luck with your findings on both issues. That ice cream looked delicious, yum. Thanks for sharing Paul, hope you and Tina and Bob have a great safe weekend!

@ModelA 2 жыл бұрын

Thanks Dan!

@rynetakeuchi4382 2 жыл бұрын

Paul I love your systematic approach to trouble shooting the problem. Your expertise on the Model A is stellar. Keep producing these awesome videos!! Until next time my friend. Aloha and Malama Pono!!

@ModelA 2 жыл бұрын

Mahalo!!

@jimadams5574 2 жыл бұрын

LOL Paul - love the headlamp test .. Too funny .. Can't wait to find out what you do to resolve this ... Nice video ... Thanksfor taking us along with ya!

@ModelA 2 жыл бұрын

Glad you enjoyed it, Jim

@omarcurrossimon7927 2 жыл бұрын

Feeling anxious. I wish we can see Gandalf the green working soon. Please don't stop to rebuild the starter!

@cynthiafarshore4323 2 жыл бұрын

It's great that your videos cover the not so good moments because it's at this time one can learn the most, which also includes being told about things like Striplamp. I bought 2 and they are as good as you say, thank you for the great help you give.

@ModelA 2 жыл бұрын

That is so kind. Thank you Cynthia!

@thesharkcom 2 жыл бұрын

Back in the day when I worked on old 2 cycle motorcycles. Some would come in fouled to the max. We would take off the muffler and oil would come running out. We would then take a blow torch and ignite the muffler to burn out all the oil. Seeing all that oil from Gandalf gave me flashbacks to the 60s....LOL 😂🤣😂🤣

@ModelA 2 жыл бұрын

Sorry for the PTSD

@2ManyTomatoes 2 жыл бұрын

This car is giving me hope. Up to now your channel has given my husband an unrealistic expectation of Model As starting with three or four turns every time. And ours doesn't. We've been trying to sort it out for awhile now. We fiddle with this and twiddle with that and then it finally gives in and starts like a champ for the rest of the day. The next day we're back to square one and whatever we "fixed" wasn't the problem after all. We've "narrowed" it down to either a spark problem or a gas problem or a nut loose in the drivers seat. We are learning from each of your "failures" and recharging our own batteries to try again.

@ModelA 2 жыл бұрын

Your story give ME hope! And reason to carry on. Thank you!

@billsheppard9368 2 жыл бұрын

In retrospect, it woulda been much simpler to just disconnect the muffler from the header. That woulda revealed instantly whether the problem was 'upstream' or 'downstream' of that point. Luuuv your videos BTW. First car I ever drove was a '31 'A'.

@lukespack 2 жыл бұрын

Gee, if you have this much trouble finding what is at fault, I shutter to think how a newcomer would handle this problem. I am amazed at how you are able to stay so calm. Good luck.

@ModelA 2 жыл бұрын

My calmness is a gift from God.

@eugenelevin8314 2 жыл бұрын

Thanks for taking us along on this adventure - gonna have to add enigma to Gandalfs name pretty soon haha

@ModelA 2 жыл бұрын

Hahaa! If this car keeps fighting me, its name is gonna be "for sale cheap".

@Rottingboards 2 жыл бұрын

Going to the autoparts store in a Model A makes the trip so much more fun.

@Giuseppe_De_Bellis 2 жыл бұрын

When you succeed, we learn. When you may happen to fail, we still learn.💪🏻 So, thank you, anyway! Pleasure to watch your videos, cheers from Italy!!

@ModelA 2 жыл бұрын

Thank you, friend

@Giuseppe_De_Bellis 2 жыл бұрын

@@ModelA my pleasure, Paul! 😊

@buick1955 2 жыл бұрын

I don't currently own a Ford Model A but I did have a 1930 4 door . I do own a 1929 Chevy 2 door coupe . Your show is informative to anyone who owns a 1920's to early 1930's car . It would be very interesting to do a comparison on a Ford , Chevy & Plymouth of the same year if possible . Obviously the Ford Model A won as so many survived compared to the competition. Great show !!

@quailstudios 2 жыл бұрын

That’s a sweet headlamp!

@ModelA 2 жыл бұрын

Thanks!

@discerningmind 2 жыл бұрын

Paul, I was riveted to this. Of course, we're all hoping to see the engine start-up and be fine. This exhaust/muffler oil saturation has me intrigued. Could the last engine have been that bad? That was a lot of oil in the exhaust and was still draining in our last view of it. And what's going on with the starter? You certainly have some interesting things to report to Mr. Guimarin. I love the headlight. And twelve-year-old Paul sold me with that effective night driving display!

@ModelA 2 жыл бұрын

Hahaaa! Thanks DM! Hope you like your head light as much as I like mine. Thank Model T for turning me on to them.

@BillGeurts2269 2 жыл бұрын

Great video, and thanks for the shout-out from the Walla Wall Sweet A’s. My money says you found the oil issue and now looking forward to a starter rebuild seminar.

@ModelA 2 жыл бұрын

Your money doubled

@MyRandyw 2 жыл бұрын

Really loving Gandolf, learning a lot of good stuff, maybe most important is the use of ice cream to assuage disappointment! Thanks bunches!!

@ModelA 2 жыл бұрын

Yes!!!

@richardfischer9811 2 жыл бұрын

While admitting that I do love my ice cream, I don't believe I've ever seen such pure bliss as that on the face of Model T as she takes each tiny spoonful. As an aside, your Model A trouble shooting is just like the Saturday afternoon serials that we used to see at the show. Hero runs into the house, house explodes. "Kids, don't miss next week to see what happens to our hero !!!)

@ModelA 2 жыл бұрын

I will ruin the surprise for you- I fail again!

@SergLa 2 жыл бұрын

Трудности делают тебя опытнее. Пол, ты стал ещё лучшим мастером, чем был до того. Классный фонарь! Теперь я буду искать такой же. Difficulties make you more experienced. Paul, you've become an even better master than you were before. Cool lantern! Now I'm going to look for the same one.

@ModelA 2 жыл бұрын

Excellent!

@ronmcguire2951 2 жыл бұрын

Hi Paul, I was expecting more oil in the valve gallery. I'm looking forward to finding the problem. Good video, thanks.

@ModelA 2 жыл бұрын

When the motor is spinning faster, there is a LOT more oil in there.

@mlackey9812 2 жыл бұрын

So Paul, it's a rather sleepy morning after tackling some very challenging situations this week with complete victory I might add. A fan, flannel sheets, a cup of coffee and my favorite morning nosh and your, this video on my cell phone. What a lovely way to start t he day. Thanks, just what I needed. OH, and by the way, yes, I too am an 'ardent' Model 'A' r. Thanks again. Looking forward to seeing the start and Smoke vs. no Smoke. Be well. Also, btw...."he is risen" !!

@ModelA 2 жыл бұрын

Yes- He is risen!

@robertharris4010 2 жыл бұрын

Paul thanks for the videos love them have learned a ton of information about what my grandfather was working on. Man they were grate cars

@ModelA 2 жыл бұрын

Yes!!

@Rottingboards 2 жыл бұрын

Ahhh, looks like oil leaked by the old engine and pooled in the exhaust. Nice video.

@geyser3445 2 жыл бұрын

So nice that everything easy easy to access and work on.

@Scott-qp9rw Жыл бұрын

Great information. I’ve got to get me some of those Headlamps!

@billz482 2 жыл бұрын

Thanks for the video and the great tip on the head-light. Just ordered two from Amazon! 👍🏻

@ModelA 2 жыл бұрын

Hope you enjoy them!

@mafcawebmaster4237 2 жыл бұрын

Looking forward to the further diagnosis of the starting problem.

@ModelA 2 жыл бұрын

Since you're a friend, it's OK to admit that you got a good laugh at my expense!

@joealbert7773 2 жыл бұрын

The battery tester appears to be a Midtronics style which actually reads internal resistance. The old load tester type didn't care what voltage the battery was. They just applied a load and watched voltage. If I remember right a 6 volt battery had to stay above 4.6 volts during the test. One problem with this tester is that it won't work on a discharged battery whereas the Midtronics style will unless the battery is really dead.

@ModelA 2 жыл бұрын

Thank you for the info Joe! Good to know.

@geoffwatson6207 2 жыл бұрын

Hey Paul, thanks for the info on the headlight. Just wished they had these fifty years ago when I was 'holding the light' for my dad, and it was never quite right! Even my mom (88 in Nov) had to agree.

@ModelA 2 жыл бұрын

I still have the emotional scars from playing "hold the flashilight". That is a game with no winners..

@jimmccoskey8253 2 жыл бұрын

Prayers and best wishes to Jack Bahm... Thanks for all the videos. Good luck with Gandalf the pain.

@ModelA 2 жыл бұрын

Thanks for the prayers for Jack. This car really IS a pain!

@johncharlton2602 2 жыл бұрын

Hi Paul entertaining and informative as usual ,thank you .As you check the valve chest at 5.29 there is a lot of rust bubbles on the exterior cylinder wall . For a newly rebuilt engine that would indeed worry me I would have a scrape off to investigate making sure ne debris goes down a main bearing lube feed hole .

@ModelA 2 жыл бұрын

It's just some surface crud. I assembled this motor myself from a machined block. That is why I question everything.

@johncharlton2602 2 жыл бұрын

@@ModelA I would investigate the origins of the crud especially in a clean recent rebuild engine . IMHO that is caused by the ingress of water could be a minute crack up in the valve seat area . I do hope I am wrong my son has a freshly rebuilt engine from a bare block very small exterior crack showed up after about 2000 miles .

@brendamcdaniel1958 2 жыл бұрын

A starter rebuild video would be nice and am glad to hear it’s not the engine causing Ol Green to smoke 💨. Sweet car. Thanks for the video.

@ModelA 2 жыл бұрын

Thanks Brenda!

@edsewetoob 2 жыл бұрын

Hi Paul! New subscriber here. Also just ordered that terrific headlamp! I owned a '30 tudor many years ago and really appreciate your vids; I am looking at a '29 tudor and am referencing your video about what to look for when buying (I made some mistakes with my first A). Thanks again and keep up the great work!

@ModelA 2 жыл бұрын

Thank you Charles. That's awesome! Good luck!

@rynetakeuchi4382 2 жыл бұрын

😂😂Paul the neighbors should thank you for getting rid of the mosquitoes 😂😂 That’s a really nice head lamp, almost like the ones we use for firefighting.

@ModelA 2 жыл бұрын

My neighbors are pretty far away, but still were not amused.

@rynetakeuchi4382 2 жыл бұрын

@@ModelA 😂😂

@williamforbes5826 2 жыл бұрын

Oh, thanks for the morning video. Good stuff as always!

@ModelA 2 жыл бұрын

Thanks William!

@oldtanker4860 2 жыл бұрын

Ima thinking checking the connections on the starter first. I look to the easy stuff first and a bad connection would do what you were experiencing even with the battery charger for a boost to power. If connection OK then yup starter likely has bad brushes or a dirty commutator. Hoping you find it soon and looking forward to the solution to the oil. Seeing what came out of the exhaust pipe there sure looks like it got well oiled when the engine was "pickled". I LOVE the headband light. Really neat product and I am a sucker for a rechargeable unit. Oh and yes illegal outside of an actual emergency. Light has to throw a specified distance down the road as per your state law and if the car came equipped with 2 headlights, both have to work.

@williamcnewlandjr4535 2 жыл бұрын

YES! And don't forget the battery ground. It's originally grounded to the crossmember behind the battery. Over the past 90 years, rust forms between the crossmember and frame creating a bad ground situation. Best to run a battery cable from the positive ground terminal to the frame.

@ModelA 2 жыл бұрын

Thanks guys! This car has an additional ground from the battery to the flywheel housing.

@federicomaisch6812 Жыл бұрын

Thank you for sharing

@bigDbigDbigD 2 жыл бұрын

I love how easy it is to open inspect a inline flathead engine.

@ShouldersMoondog549 2 жыл бұрын

WOW!! just ran across you channel!! My wife and I have her Grandfathers 1930 Model A Fordora (I think that is spelled correct?) Haven't got it started yet. The last time we think it had run was about 1965. I have subscribe to you channel and will be looking for future videos and well as going back to view others!! Thanks for posting!!

@ModelA 2 жыл бұрын

Welcome, Gene!

@dalemettee1147 2 жыл бұрын

Paul, the other day, I watched one of my fav's refurbish an Olympic AM radio. Upon opening it up, he found that a wire wound resistor was in the power cord. To me a very strange set up. The radio was what they considered a "Portable" with two batteries to supply juice for operation.

@ModelA 2 жыл бұрын

That could be what we call a "curtain burner" radio. Some of the series filament string radios used a resistor type of power cord to bleed off some voltage under load that made the cord hot, because it was a long resistor. When substituting a modern power cord, you use a wirewound resistor in series to simulate the curtain burner power cord's function to the circuit.

@randall1959 2 жыл бұрын

I want one of those headbands. So many times I've crawled under cars with a flashlight in my teeth. Don't feel bad. I swapped out a transaxle in a VW only to find out I had a bad axle bearing and the replacement transaxle was toast.

@wwskydvr 2 жыл бұрын

I'm new to your KZfaq channel, and enjoying it immensely. Was wondering if you could do a video on the AA trucks ... pluses and minuses. God Bless you and your wife. Great job.

@ModelA 2 жыл бұрын

If someone will loan me theirs, I will

@markpalmer6760 2 жыл бұрын

It's amazing how easy it is to work on those cars. Great headlight I might have to get one of those. Been to that parts store it opened prior to moving away, did the Napa store clean up there act or closed? Enjoy your trip to Texas I think it's going to be a hot one out here this year, wear where you going to in texas? Enjoy your videos.

@billebobb 2 жыл бұрын

EASY ❓

@ModelA 2 жыл бұрын

The AutoZone opening right across the street from O'Reilly is what finally did n the Napa store. That building is an Italian deli now, and it's pretty good!

@rickuyeda4818 2 жыл бұрын

My friend drag races a Model A roadster P/U with the 4 banger hooked a 5 speed and a Champ rear end at the Antique Drags. One Saturday, going to our coffee me, he didn't show up. The following week, he brought a piston with a hole.

@ModelA 2 жыл бұрын

Got a little aggressive with the timing, eh?

@davidwildridge8080 2 жыл бұрын

I believe 50 lbs compression on all cylinders on a rebuilt model a engine should okay as they didn't have very high compression brand new. Nice looking A.

@billebobb 2 жыл бұрын

Should be double that!

@davidwildridge8080 2 жыл бұрын

@@billebobb good to know

@ModelA 2 жыл бұрын

That's about right for a newly assembled stock Model A motor. After about 500 miles, it should have closer to 70.

@keviny4357 2 жыл бұрын

And hello to you and Tina, Paul. From the Beehive A’s!

@ModelA 2 жыл бұрын

There you are!!

@dwilliams8365 2 жыл бұрын

Great example of proper troubleshooting -most shops would have pulled the motor and told the customer that you need a complete re-build. Correct troubleshooting is all most a lost art. I predict the only thing bad was a oily muffler. I personally would have let it run longer.

@ModelA 2 жыл бұрын

Most shops would turn this into profit! I'm just not very smart.

@aborer1790 2 жыл бұрын

Enjoying your videos and Model T's videos as well. I have a question: how do you fasten rope between the spokes during winter? I've looking for videos and articles about this, but couldn't. Thank you for the great videos!

@ModelA 2 жыл бұрын

You mean when they would wrap rope around the outer wheel and tire like snow chains? I have seen it done but doesn't look like it would be very nice on the wheels or paint.

@aborer1790 2 жыл бұрын

Exactly what I mean. I've never seen the process and often pondered about it whether it was truly useful in comparison of snow chains. Thank you for taking the time and can't wait til your next upload.

@Mccabone Жыл бұрын

Odlfi are the best Head lamps...! Last Christmas all my friends received these as Christmas gifts!

@ModelA Жыл бұрын

Agreed!!!

@dalemettee1147 2 жыл бұрын

P)aul, I noticed that you and Model T are experts in drowning in ice cream. Me, I'm just a plain Jane guy with vanilla or on a really good day, French vanilla. yoo hoo!

@ModelA 2 жыл бұрын

Hahahaa!!

@mackfisher4487 2 жыл бұрын

Paul I always learn something while watching your informative videos, this morning while sipping my coffee you referred to your cars "valve galley" as I was Army and you are Navy should I call it a valve mess hall? Kidding aside I always enjoy your videos.

@ModelA 2 жыл бұрын

Hahahahaa!! I get a similar chuckle when I hear about "head gaskets". Or replacing the "head". That's what the Navy calls the toilet.

@mackfisher4487 2 жыл бұрын

@@ModelA Next time I have to fix a leaky toilet I'm going go to the orange box store and asked for a wax head gasket. While I'm picking up the luminaire for the overhead.

@TooManyHobbiesJeremy 2 жыл бұрын

Good ending to the video. Win win for us viewers 😁

@ModelA 2 жыл бұрын

Thanks TMH!

@toronado455 2 жыл бұрын

omg that head band LED is awesome 🏆

@ModelA 2 жыл бұрын

It is!!

@douglaslambert579 2 жыл бұрын

Hope to see a starter rebuild video. Enjoyed your video.

@MarcioPadilha09 2 жыл бұрын

Show esse carro antigo 👏👏

@ModelA 2 жыл бұрын

Gracias!

@dennisbailey4296 2 жыл бұрын

I'm watching the end of your video when you two are eating your ice cream together and your wife is beaming away like she's just talkin to the best friend she's ever Been with in the world and she probably is because of that close encounter you had!! All the best from Surrey BC Canada 🇨🇦

@ModelA 2 жыл бұрын

We are besties.

@clc7800 2 жыл бұрын

Hi Paul. Great videos. My first time making a comment, actually a question. What do you consider a good compression for the cylinders? Thanks

@ModelA 2 жыл бұрын

Thanks for the comment! In an engine with at least 500-1000 miles on it, all stock, you would expect 70 or more. In a hopped up motor with high compression head, bored out, etc., you would see 90 or so.

@colinblick4903 2 жыл бұрын

12 ?…….Paul, Welcome to the club 🤩….. love to know where that oils coming from🤔…..think I’ll go an get some ice cream….love the third eye😳

@steveshoemaker6347 2 жыл бұрын

......Thanks Paul for the fun video...God's Blessing to you and your wife...Shoe🇺🇸

@AstraWerke 2 жыл бұрын

What a relief to see it wasn't the engine at fault. I'm currently rebuilding a starter myself, so it'd probably be fun to see how much I've already done wrong ;P By the way - I've noticed a ticking noise from your blue coupe - and still not being an experienced "car guy", I have no Idea what's what when it comes to noises. Do you know what yours is from? Valve clearance maybe? Best wishes Adrian

@ModelA 2 жыл бұрын

I set the valves too loose. It has been ticking for 17,000 miles. Might fix it someday. Maybe after it gets back from Texas.

@AstraWerke 2 жыл бұрын

@@ModelA Better too loose than too tight, I reckon. Are you road-tripping to Texas at the moment? :o

@ModelA 2 жыл бұрын

@@AstraWerke Not yet

@johnkranz4004 2 жыл бұрын

Great video Paul and Model T Enjoy your ice cream 🍦

@ModelA 2 жыл бұрын

We did! Thank you

@davedaugherty3781 Жыл бұрын

i jusy bought a 31 coupe. all restored however i want to convert it to 12 volt. reason is i want to add a stereo under the dash. any suggestions?

@ModelA Жыл бұрын

I can't help you with that. Sorry. I have converted a lot of Model As back to 6 volts though, I know how to do that.

@danterry6328 2 жыл бұрын

As always a pleasure.

@koniseatskimchi5541 2 жыл бұрын

i have one of those headlamps. i Highly recommend them. i use mine all the time. Plus it can be charged at your computer.

@t.s.racing 2 жыл бұрын

Paul, as a Engine Builder I can tell you that Cast Iron rings seal quite rapidly, often in as little as 35-75 miles. I of course ASSUMED that you're running the cast iron rings. Now the ring seal is of course dependent on the cylinder finish as well as the dimensions for taper, out of round, and size. I read below that you have several hundred miles, and if the rings haven't sealed by now, they generally won't. You also mentioned God, thank you for that. 🙏🙏 T.S. RACING

@ModelA 2 жыл бұрын

Hi BTC! This engine has a total of 3 MINUTES running time. No miles. God bless.

@MrBrendog67rat 2 жыл бұрын

i would take the starter off the shelf! i think your car is gonna be fine

@ModelA 2 жыл бұрын

Thanks!

@farmall_cub_in_columbia3642 2 жыл бұрын

Hi Paul I enjoy your channel. I am a car guy but also a ham. I saw that FAA VHF/UHF amplifier on your shelf and the Hallicrafters receivers on the shelf in your shop videos. Anyway, Hi and best 73's from W2NMI

@ModelA 2 жыл бұрын

73, OM!

@mattomon1045 2 жыл бұрын

Hi model T With the exhaust to clean it out Use some lacquer thinner just a cup drain it leave it dry. and rebuild the starter please.

@slimmers00 2 жыл бұрын

Thanks for sharing your thought process while troubleshooting. By the time I finally get a Model A, you should have a pretty extensive library of repairs on your channel. For now, I dream & learn while I become debt free & then save for my A

@ModelA 2 жыл бұрын

You in baby step 2?

@slimmers00 2 жыл бұрын

Yes! You speak the language 😄. Getting there. Probably another year or more before starting baby step 3. Not long ago, I was planning to borrow money to buy an A, but I’ve learned to put aside my impulses, so I can be in better shape in the long run.

@ModelA 2 жыл бұрын

@@slimmers00 Yes! Goood for you, my brother! I have been in baby step 7 for almost 10 years. It is an amazing place to be and even affects how you make business and work decisions. I don't take guff from bosses because I'm afraid of losing my job or house, and I get a LOT more respect from them because I do what is right, not just everything they say out of fear. It really accelerated my career path! Also, I sleep better knowing I did the right thing, etc. EDM now.

@slimmers00 2 жыл бұрын

@@ModelA I hope to get there. I want to be able to give & to help people, along with enjoying hobbies, without worrying about bills.

@ModelA 2 жыл бұрын

@@slimmers00 Or start a KZfaq channel where you help others with the stuff you enjoy! Wait... You don't need money for that... After you have a paid-for house, everything just seems to fall into place.

@wurly164 2 жыл бұрын

Great, now I have to go get ice cream 🍦

@jryer1 2 жыл бұрын

Excellent video. I almost bought a 1970 Chevy C10 pick-up, but decided NOPE, nothing is stopping me from getting a Ford Model A.

@ModelA 2 жыл бұрын

Right on!

@jryer1 2 жыл бұрын

@@ModelA Now, how can I get you and Model T to move to Texas, so at least I'll have an expert nearby - hahaha!

@ModelA 2 жыл бұрын

We will be there in a couple weeks for the MAFCA convention

@jryer1 2 жыл бұрын

@@ModelA I just looked up the convention location and dates, and would you believe I live in Kerrville!! Ok, it's obvious at this point, this was meant to be. What days are you planning on being there? I'm literally 5 minutes from the Y.O. RANCH RESORT HOTEL. They have a decent buffet. It can't get any easier to get here, just one road I-10

@ModelA 2 жыл бұрын

@@jryer1 I will be at YO Ranch all week

@robinimpey101 2 жыл бұрын

1. That headlight is great! 2. Seems like it is just the oil in the muffler making smoke. Time for an Italian tune up! 3. Why can't the next video be of you grabbing a starter off the shelf AND rebuilding a starter? 4. Why didn't HQM 797 get to go to O'Reilly's??? :-( Another great video! Can't wait for Part 2 of California Smoke.

@ModelA 2 жыл бұрын

I drove it to the auto parts store once. Some gorilla pulled in and was trying to show off to the girl with him as I overheard him say to her "Watch me buy this car from this a**hole" and then he proceeded to try and offer me 5 grand for "that junker". He climbed up slightly using the exact same lines the douchebags on TV do. I told him it has been in my family and was going to stay that way. He then let loose on me as if I did him wrong. That car deserves more respect than that. As I was leaving, I told the girl she could do a lot better.

@robinimpey101 2 жыл бұрын

@@ModelA Last time you told me about taking the 29 out it had been disrespected then too! That is completely unacceptable and I think the best course of action is to get that car out of CA to somewhere it will be appreciated by everyone! But where to????? Hey I have an idea!!! ;-)

@ModelA 2 жыл бұрын

@@robinimpey101 Hahaa!! TS and I have been talking about getting out of California and heading to a more conservative state for a while.

@robinimpey101 2 жыл бұрын

@@ModelA Pack your bags, I've got just the place for you! Not quite as warm as CA, but your views and cars would be loved and appreciated here!

@clc7800 2 жыл бұрын

Hi Paul and Model T. Thanks to you both tomorrow I decided to buy a Model A. I am going to pick up my first 1930 Model A Tudoor and it comes with a Mitchell overdrive. I think I saw two videos of you using the Mitchell overdrive. Can you explain how to use the overdrive? It has a high and a low. When do you use these? At what speed on 2nd gear do you engage the high? Do you just press the clutch and shift the Mitchell to high? Can you engage it in 3rd gear and at what speed? Thanks

@ModelA 2 жыл бұрын

Congratulations!! I did video on exactly that. Found it! Here- kzfaq.info/get/bejne/atueZq2GzNSYhIk.html

@ellesmerewildwood4858 2 жыл бұрын

With that headlamp on you look more like GORT from The Day The Earth Stood Still. ( or The Day The Model A Stood Still ) 😉 If I may ask, back in the day when these cars were brand new, was the paintwork as beautiful and glossy as the car you drove to the parts store ? I've seen so many beautiful vintage cars restored beautifully with modern paint and modern paint techniques and always wonder if they looked that good rolling off the assembly line. I mean, paint technology back then wasn't what it is today.

@ModelA 2 жыл бұрын

Ford used lacquer on bodies and enamel on fenders. The car in this video has Lombard Blue lacquer and black lacquer on the body and black enamel on the fenders, just like original. If you examine the factory photos, you will see they buffed the lacquer at the end of the assembly line and it was very shiny. Just like this. The enamel on the fenders was dipped, and was naturally pretty shiny.

@831BeachBum Жыл бұрын

I noticed when you pulled the exhaust manifold the inlet to the exhaust pipe was dry. Might have been an accumulation of oil from last engine sitting in muffler.

@ModelA Жыл бұрын

Yep. See the next video in this series for the answer.

@vesselstone0351 2 жыл бұрын

Poul, I write to you from Denmark / Europe. Have you ever heard about the European produced Ford Y or also called Ford Junior also from the 1930-ies. It was kind of a minor edition of Ford A.

@ModelA 2 жыл бұрын

Yes. Welcome!

@firewalker6316 Жыл бұрын

Proof positive, it doesn’t just happened to me. Great video.

@ModelA Жыл бұрын

Ha! Nope.

@kenfowle2164 2 жыл бұрын

Did you say the engine was newly rebuilt?If so it very well could be hard to turn over.I would think you might try by hand crank ,no spark plugs,to gauge this.Also to tow it and jump start in 2nd.or 3rd gear rather than force to starter motor to turn over a stiff “new” engine.

@mikehernanadez9196 Жыл бұрын

im so glad your a happy person, with all your dream cars ,

@ModelA Жыл бұрын

I'm a happy person even without the cars! I have the greatest wife ever, an awesome job, and the promise of everlasting life!

@antiqueradionut 2 жыл бұрын

I'm confused by your reference to motor oil for a motor. I need engine oil for my engine. LOL I was surprised when I saw the battery you are using. Could you give more information, or link to a video you may have already posted? Thanks, Aaron Hunter

@ModelA 2 жыл бұрын

Haha! Well, the Ford calls it a motor in the owner's manual several times, so perhaps somewhere between 1929 and now, it became an "engine"?

@rhodesia1980 2 жыл бұрын

Ok I'm looking at buying a 1931 Ford Model AA truck dully has 4 cylinders engine ran a couple years ago but it needs a ignition switch and a voltmeter in order for it to start it so the seller is stating. and the carburetor might need cleaning due to sitting for some time but it has been sitting in a garage. he mostly tows it around on a trailer. I been online looking for parts maybe looking at starting a project since I need a hobby since I just retired. I'm not much of a mechanic but these engines look sort of simple to work on. So is there a good web site for Ford Model A for parts like for the AA model?

@ModelA 2 жыл бұрын

All the usual Model A parts suppliers carry what is available for the AA also.

@myrlstone8904 2 жыл бұрын

My first thought when hearing the slow cranking speed (assuming that you were providing an adequate power source either with the battery, Bertha, or a combo of both) is that you have a starter problem. Not uncommon on the older starters is a case of worn armature bushings. This will allow the armature to rub and drag on the field winding bosses. This will cause a very high starter current draw with a resulting significant drop in system voltage. Enough that the plug spark will be marginal. Testing for spark in the normal manner, meaning spark plugs at atmospheric pressure can be misleading. Easy to be led down a rosy path. As the combustion chamber air pressure climbs on the compression stroke so climbs the resistance at the spark plug electrodes. If you’ve ever played with one of the old pressure type plug testers, this is very easy to see. One can dial in the pressure read on the compression test and observe the sparking action at that pressure level. I suspect this testing stemmed from an earlier time in plug technology and from the world of 6 volts. Drop a few volts down from 6 volts during cranking, and the ignition coil function can be very marginal. There used to be an induction amp meter tool available for checking starter operational current draw, I don’t know if they are still available. I purchased mine probably 50 years ago. (of course, one could use an induction clamp with one’s Fluke)

@ModelA 2 жыл бұрын

Thanks Myrl!

@myrlstone8904 2 жыл бұрын

I do realize that you are aware of this phenomena: I note it for the benefit of some viewers. The effect of atmospheric pressure on controlling or promoting high voltage sparking , arcing , or shorting is so profound that many WWll high altitude radial engines utilized a pressurized ignition system. Compressed air was routed from the super charger/turbocharger outlet to the magneto bodies and spark plug high tension leads which were routed through a metal plumbing network. Without this boost in internal magneto air pressure, internal arcing and shorting was near impossible to control. Trivia, I know but to the mechanically bent mind - interesting and another tool in the troubleshooting mental tool bag. Thank you to the Shinn family for bringing this Model A themed KZfaq project to fruition. And a shout out to Adrian in Germany, I’m hoping his channel is getting the love which it deserves. Not to forget, “One who collects “ And many others. We as A owners are a lucky bunch, have it good, sitting pretty, high cotton.

@davidwalle5025 2 жыл бұрын

Do a leak down test to check rings and valves very easy and quick just remove spark plugs and pressurize with air.

@ModelA 2 жыл бұрын

Leakdown only tells you something if the motor has enough time on it for the rings to seat.

@myronjacobs5014 2 жыл бұрын

Paul good morning. A fantastic problem solving clinic this morning. Contents of you video of this morning, is in my opinion angle, you are or not you this engine has 2 problems, 1 is the excessive oil that seeped through the open valves accumulated in the muffler, that upon start up produced the smoke, and that amount of oil collected upon drainage is about the quantity poured via the spark plugs. The 2nd problem I note is, that although you have a serious battery charger back up, in my opinion the starter turns very sluggish, I mean too sluggish, it should have more pep. Indicates that the Amperage drop is serious, pulling also the current needed for the coil to spark the plugs. In this video you did not check the spark, also fuel flow! Anyway, very interesting your next footage, and to determine, where the oil came from, low compression is understandable due to newly overhauled motor, and why upon cranking such low turning over of the starter. The starter also must have a problem in the windings that it uses so much amperage that produce that sluggish starting performance. Thanks and a great week end.

@ModelA 2 жыл бұрын

Thanks Myron. Did you see how much oil flew out onto the ground in the last video?

@myronjacobs5014 2 жыл бұрын

Paul thanks for your feed back, now if you refer your last video footage, what I saw in your yesterday’s video, is the amount of oil that drained from the muffler/ tail pipe in the pail. And that is a good quantity, if you mean last video, is there one I may be missed? But again a very good trouble shooting this clinic. Ill stand by for your next video. So, great the way you set up your footages, all followers live this together towards solution, experience and getting to know our good old reliable Model A engines at the source, because simple and darn good engines they are, proof 90 years plus, right? Have a great weekend and regards to Tina🤗

@ModelA 2 жыл бұрын

@@myronjacobs5014 Thanks Myron! Yes, you might have missed one.

@kevinweston6817 2 жыл бұрын

Great video I probably would have let it run tell it stoped smoking or got worse lol

@ModelA 2 жыл бұрын

Except I live in California, the land of crazies and people who worship environment instead of God.

@williamforbes5826 2 жыл бұрын

Cars & Coffee ☕! Your car, my coffee! Thank model T for the head lamp! I will be purchasing one for sure. Now, please tell me how you fixed Big Bertha. I gotta know! Connection? Component? Switch? Please! I'm as curious as a 🐈 cat.

@ModelA 2 жыл бұрын

The timer had come loose and got spun around so many times, one of the connections got yanked off.

@williamforbes5826 2 жыл бұрын

A connection! Sigh! No I can rest. People throw away good appliances without ever looking into the possible fixes. I actually drove

@williamforbes5826 2 жыл бұрын

away a car that I bought as a 'non' running car. My gain, their loss. It was junk anyways, but Running Junk!

@davidpierce8613 Жыл бұрын

Alright Model T, no more busting my chops for eating ice cream!!

@WILDWILLYBILL138 2 жыл бұрын

Attempted to get the headlamp. After inputting info multiple times, it would never reload after hitting PAY button. Hopefully I don't find myself with multiple headlamps and charges in the near future...

@ModelA 2 жыл бұрын

Dang Sorry about that. How about on Amazon?