This guys at so good at explaining simply and efficiently

Hey, David thanks for steering us in the right direction!! Great tips to a safe ride, more comfortable control.

Very informative and complete. Thank you for your time.

Awesome Dave Welch!! Once again, very nice descriptive demonstration. Thanks!

I like anti-seize compound on bolts, nuts and the input shaft. The 12 point bolt on the RAG joint is part of a cast pinch attachment and once torqued will not come loose. If you want to use anything simple because it is steering, use the “Green” 242 Loctite compound. It is a low strength designed to be installed after assembly because it’s low viscosity allows it to “Wick” into the threads thru capillary action. Anti-Seize, (Regular Aluminum Based & High-Temp Graphite) Dielectric Grease and Red, Blue & Green Loctite and Red Jelly “Loctite” 518 are some of my main go to assembly chemicals. I buy the big $40+ bottles of Loctite as it is so important plus the 9 bottles of anti-seize with brush under lid. If dry, add a splash of mineral spirits and stir it in. Great video information Dave!!!

Another great video. I did a tilt swap on my 66 c10 5 years ago and it wasn't that bad to do.

MY GOODNESS Dave!!! That is FANTASTIC! Your video is so wonderfully detailed, step by step. And the camera work and lighting is great for us "have no idea what were doing" people 🙂. You've actually made me feel like I can take this on and do it in my '93 Ford E350 box truck! Thanks!

Great job David, thanks

Great information! I have this job ahead of me this coming summer. Thanks!

I wanted to keep my three tree. But I couldn't find one anywhere. I had to keep my original. But I put in a power steering box and used a mid 80s jeep shaft. Fits perfectly on the box and I attached it to my knuckle shaft. Grinded it to fit in a jeep shaft. Put in a bolt through the side of the hole where the knuckle was. Epoxy it for more safety.. It works great 👍.

Very informative!

Hello Dave Welch, Crazy Question Here: Is it possible to convert a regular Chevy Column (68 Impala column already installed) over to a Tilt wheel column by replacing just the "heads" without changing the actual column? I have a tilt wheel column in hand, (same make & vintage) and wonder can it be "pieced" onto the existing column. I wanted to avoid the whole process of removal and install the tilt mechanism. POSSIBLE?? Thanks, Great Videos!! Joe

Do you have a video, or can you make one, on replacing the neutral safety switch for an '84 Chevy squarebody?

I have a newbie question. I have a 66 c10, and plan on keeping the inline 6. My goal is to swap out the 3 on the tree manual transmission and go with an automatic. I’m not a fan of cutting the floorboard to put the shifter, can I put one of these automatic steering columns?

What kit did you use for the column to the steering box and also the electrical connection. Swapping out my steering column in a 65 C10 and the column has a 1 inch DD rod. After watching the video should be fairly easy.

Great video. Do you have one for my 83 Jeep Cherokee Laredo? Mine is very bad☹️

55-59 Chevys have a solid shaft that has no connectors to the box. How do you install a tilt column on one?

Where do you measure to find out if you need a 30 or 33-in column?

Great tutorial Dave! Do you sell a tilt column that I can re-use stock steering wheel?

How would this work My 63 has a factory manual that’s been swapped to a th350 and I want to swap it to a column shift like this. Is there anything else I’d need to purchase? Thank you!

What lenght do you recomend for the 1969 C10?

You say its a bit harder with earlier models. I have a 84 c20 over in the UK with power steering, would you guys know explicitly what would be needed for that model? My trucks my daily so I wouldn't be able to get stuck due to a part not being there

Forgot to mention….Would a GM universal steering column fit on my 83 Jeep Cherokee Laredo?

Hey any chance you could tell me where to get the column your utilizing. Just got a 64 c10 with 3 in the tree and need to change it 🤞🏻

Will the 67-72 columns that your company sells fit the 60-66 trucks?

You guys have any that’ll fit a 1979 c10 custom deluxe?

Hello quick question. On this particular column I am going to be installing on a 62 as well. I have not ordered yet but how are you getting it to bolt underneath the dash does it have two slots were a direct bolt how did you get it to mount? I appreciate if you can answer. Thank you very much

What’s a good length steering wheel I’m 6ft

Collapsable steering column were put in everything after Senna's death :(