1949 TV VT73 Diagnosis and Repair

Рет қаралды 941,080

jdflyback

2 жыл бұрын

A look at a few different 7 inch sets and the repair of one of them

Пікірлер: 911

@wayneyadams Жыл бұрын

My father served 26 years in the US Navy as an electronics technician. When I was a small child, he built our first TV set, and when he retired in 1965, he owned and operated a TV repair business. He was a wizard at TV repair. Just a test or two and he could pinpoint the problem. I even saw him look at the TV and from the symptoms he saw on the screen he could figure out the problem.

@UdaySingh-cg3rw Жыл бұрын

Did you got any inspiration from your father to go in this field ? You should be an electronics engineer , I think 👏👏

@SR-ci6bf Жыл бұрын

LED TVs of this time cannot be repaired.. 95% of their damage is a broken screen, which is priced at the price of the device It revolutionized the manufacture of screens.. Yesterday I bought a 32-inch TV at a price of 100 dollars... There are computer games with a screen size of 7-10 inches, the price of which does not exceed 45 dollars.. And a used computer for 30-50-100-200 dollars? There is no need to repair the device.. Throw it away and buy a used or a new one?

@wayneyadams Жыл бұрын

@@SR-ci6bf This was the early 1950s, there were no LED TVs, it was the old-fashioned black and white CRT picture tube.

@wayneyadams Жыл бұрын

@@UdaySingh-cg3rw No I became a Chemist, then eventually a Physics teacher. But I loved electronics and was a Ham radio operator for a long time.

@UdaySingh-cg3rw Жыл бұрын

@@wayneyadams 🌹🌹🚩🚩👏👏

@iplop 2 жыл бұрын

I'm amazed you were able to get one of those TVs to work! lol, I would've completely noped away from that at first glance.

@jdflyback 2 жыл бұрын

Thank you!

@chriskwakernaat2328 Жыл бұрын

But that's the challenge, like getting an old rusty engine to run again.

@MSWEET Жыл бұрын

@@jdflyback good job

@netinho100387 Жыл бұрын

@@jdflyback Hi! I'm studying electronics. I watched your video and got very interested. Can you send me some pictures of the electrical schematic of this television, so that I can analyze it? If you have the pdf file, can you send it by email?

@Mayu_Listen_to_my_Song Жыл бұрын

@@jdflybackI don't think any of our ancestors or the inventors of this TV would have ever expected to play anything modern these days. They must be cheering in their graces for your achievement.

@jeffberwick Жыл бұрын

Really cool the way you went step by step to see how each failed cap affected the circuit! It was much more insightful and interesting than if you had just blanket-recapped everything.

@jovetj Жыл бұрын

I was waiting for magic smoke of the ancients...

@mohammedalim2750 Жыл бұрын

❤️

@spookyboo3164 Жыл бұрын

i remember going to an electronics club at the school but the teacher Happy Harry as we used to call him really knew nothing about electronics it was one of the sixth formers that built the projects we called him happy harry cause hed got a permanent smile on his face

@1Chitus Жыл бұрын

Didn't think I would be waking up on a Sunday morning to watch someone repair a vintage TV, but here we are! Nice way to start the day to see how old electronics work.

@jovetj Жыл бұрын

What a rat nest. Can really see why printed circuit boards became a thing. Great video! I appreciate that you care about old tech like this. This is history, and it's worth preserving.

@bunkie2100 Жыл бұрын

It may have been a rat’s nest, but if the assembler had good soldering skills, it was much more reliable than early printed circuit boards which suffered from thermal cycling that could cause hairline cracks in the traces which were maddeningly difficult to track down and fix. As such hand-wired sets such as Zenith models didn’t fail as often as often and were considered to be better televisions.

@bunkie2100 Жыл бұрын

Very cool. I worked on a lot of late ‘50s and early ‘60s sets back at one of my first jobs and this really takes me back.

@jim5148 10 ай бұрын

The parts count is so high in a TV that even PCB's are jammed.

@MrDegsy69 3 ай бұрын

@@bunkie2100 'Hard wired' all the way was pretty much the case for the apollo moon shots as well. Sensitive modern day electronics will require a lot of shielding to survive the harsh rigors of a moon mission. The present day Artemis programme should lead to some interesting developments in rugged electronics that can be monitored in real time by a human crew. This will add to the knowledge data base of whats already known by autonomous Moon and Mars probes and rovers.

@HobkinBoi Жыл бұрын

I never knew the picture on those could be so clean. I just imagine the picture would occasionally bounce around or have constant noise... to see such an old set working so well is amazing.

@monad_tcp Жыл бұрын

I always find it amazing that old electronics perform better than when they were brand-new just because you used modern caps. capacitors back then were really, really trash.

@yaboiii64 Жыл бұрын

a large part also has to do with the camera recording too. he was using a modern camera to capture the video he was playing. Cameras were not the best but it was the best they had.

@wayneyadams Жыл бұрын

Those old sets had pretty good pictures given the limitation of the resolution, which was 525 lines. In addition, most recorded programs were shot on film which explains why TV shows like "Hogan's Heroes" from the early 1960s has such an incredibly high-resolution picture.

@nukester. Жыл бұрын

@@wayneyadams 480 lines carrying the visible image. :-)

@wayneyadams Жыл бұрын

@@nukester. The NTSC standard for analog TV is a frame rate of 30 frames (images) per second, consisting of two interlaced fields per frame at 262.5 lines per field and 60 fields per second.

@stevekitt52 Жыл бұрын

Takes me back to when I was a TV engineer starting in the late 70s till the early 90s before I moved to cable TV and telecoms. It was satisfying to fix tv's back then and on a winters day in the workshop, those old valve tvs could keep you warm 😊

@k8zhd Жыл бұрын

When I was a young engineer at RCA in Camden NJ, about the same time, the heating system in our 1910-era building was about shot, so we turned on the old tube-type Tektronix oscilloscopes to keep the lab on the corner wall habitable in winter. LOTS of tubes in those, plus a fan to move the heat around.

@Sockieknowshockey Жыл бұрын

Fantastic! There’s something about the warmth and glow from a crt tube. Very cool to watch Mustie1 on an old TV set.

@DavidD-eo8ts Жыл бұрын

Loved the video. Reminds me of a 5" TV I built it 1956 when I was 16 years old. It used a 5BP1 ex radar tube with a green phosphor. It always had issues with poor vertical lock but it was a design problem in the original hobbyist article and I didn't have the skill to improve on it. Many good memories of my early days whilst watching this video.

@lucasrem Жыл бұрын

Making a custom tube is not that hard, getting the Forsfor on it is a bit harder, but we can do that too, only if you can tool the right tools, or can find people who can do that for you ! Upload what you did please !

@directcurrent5751 Жыл бұрын

Electric charge internal deflection plates? I've wondered how well a radar tube would work on 525 lines. Seems like it would be overwhelmed. That is an amazing build for any 16 year old and 1956 quite the bleeding edge.

@jozefbubez6116 Жыл бұрын

Went down the same road in 1968 (age 18) with a VCR139A (2 3/4"). I began two years earlier but couldn't make the TRF vision receiver stable at first. In those days, we still had 405-line TV on 45MHz so, following the line of some of the early UK sets, bearing in mind that pre-war there was only one TV channel, the TRF route was possible. I still have some of these early electrostatic tubes and with a sprinkling of transistors, might put together something similar but video source would need to be a DVD player or similar.

@Mr_Ravee Жыл бұрын

😎😎😎😎👍

@jozefbubez6116 Жыл бұрын

@@directcurrent5751 No reason why ES would not work on 525 or 625 lines come to that. Here in the UK 405-lines was not phased out until 1986 and 625-lines was introduced in 1964. It can be quite a challenge if not near-impossibility to persuade a 405-line LOPT for a magnetically deflected CRT to run at the higher horizontal frequency but no corresponding difficulty converting an electrostatic timebase.

@valentinobergamofilho4330 Жыл бұрын

I have a working TV like this here in Brazil. Congratulations on the fix!

@okb6436 2 жыл бұрын

Your videos are very interesting! Your channel is quite underated, nice to see people still like vacuum tubes...

@audryhaynes3277 Жыл бұрын

Many musicians, especially electric guitar players, still prefer tube amplifiers to transistors. Until it was stollen, my stereo system was all tube-type equipment. Couldn't afford to replace it so now I'm stuck with transistor stuff, which just isn't the same.

@raymodg.8039 Жыл бұрын

Vacuum... Tubes.... Huh huh huh huh

@lucasrem Жыл бұрын

Who needs to restore old TV crap ? why you need more people ? Why you never get hits ? What did you do so far ? Not interesting, who needs skills here ? entertain them with nerdy crap ?

@eugeniyborisov4512 Жыл бұрын

@@audryhaynes3277Да, я так же считаю , что и "место" транзистора - где угодно , только не в звуковоспроизведении. Но ,что поделать, приходится следовать "прогрессу"(принудительному). В то же время понимая,что в ламповых усилителях отсутствуют четвёртые гармоники, а в транзисторных - слышны шестнадцатые.Это я вспоминаю по статье в журнале "Радио".

@Mindsi Жыл бұрын

Mr Carlsons lab too!

@g-r-a-e-m-e- Жыл бұрын

That was very impressive. Your understanding of these ancient machines is amazing.

@fido139 Жыл бұрын

I like that you don't put in annoying background "music". ✊👌 SUPERB!!

@NoNameNoWhere Жыл бұрын

Ditto. Slightly unrelated, but do you go mad when people take videos of rescuers and plop sappy music on top? "Oh, this video of an officer saving a child isn't enough - let's add stupid music because people are incapable of emotion otherwise." Sorry, had to vent, but I feel like you'd probably relate.

@VanHellsing12 Жыл бұрын

It's pleasant to watch a kid being into stuff like this instead of just video games and their phone.

@garyweslager5857 Жыл бұрын

This video was a delight to watch. This was our first TV. My parents (Dad was W3NVS ham radio operator) bought it from a childhood friend in 1949, who was also a ham radio operator, that owned a TV/Radio repair shop. Ours was the first TV in the neighborhood and we kids would all come to my house to watch Captain Video! At a discount, I think my dad paid something like $130 at the time - a LOT OF MONEY. Later (in 1957) I became W3KYN and am still licensed as K3GW.

@gunier.j.kintgenanimations Жыл бұрын

Say, do you still have that old TV set? What frequenct do you transmit on, Maybe I could try & tune in!

@tiktak7082 Жыл бұрын

Завораживает ремонт настолько старых вещей . Не знал что такие ещё можно купить . 😊

@herrakaarme Жыл бұрын

Later Motorola discovered the wonders of printed circuit boards. An intriguing video. Thanks for posting!

@mentalizatelo Жыл бұрын

Watching a 2022 digital video into a 1949 analog TV really has it's magic. Great video, thank you.

@SKYREAPER30 Жыл бұрын

I bet that TV never thought it would see the day of digital technology, it’s like great grand parents meeting great grand kids.

@mentalizatelo Жыл бұрын

@@SKYREAPER30 If TVs could cry, this would be the perfect moment xD

@obifox6356 Жыл бұрын

Amazing that the CRT has held a good vacuum for all of these years.I bought one of these from a neighbor back in early 60s, when upgraded to a 10 inch set. 😀 I should try getting it to run again. From an ex-ham and ex-CRT engineer.

@obifox6356 Жыл бұрын

@David Wanklyn Surprisingly, I remember a lot. CRT technology has not changed much. Ham radio has. 😀

@AlanCanon2222 Жыл бұрын

Gorgeous picture, I'm impressed not just by your repair but by how well the set works as designed.

@adoljitler69 Жыл бұрын

this dude can go back 80 years and he can still repair 40s and 30s technology what a god

@mohamedroaissat6542 5 ай бұрын

As if we are living the 1940s. Thank you for your efforts and for getting back the peaceful old days.

@ryanbarker5217 Жыл бұрын

i have no idea what you're talking about, but i love seeing something like this brought back to life. we should never forget this kind of history. i'd love to see this rolled into a classroom of kids and let them know just how far we've come.

@HappyDiscoDeath 7 ай бұрын

a vintage tv repair vid and delicious coffee are an afternoon well spent!

@miguelburgueno4891 Жыл бұрын

Generally speaking, I don´t like too much "electronic videos" because I can take a measurement, read a schematic and in fact, I built my own radio equipment -I´m an "old fashion Ham"...- but when I saw the TV screen and the age -1949..!!!- I couldn´t stop watching your excellent work. Very clear and detailed, even for me..! Many thanks, keep posting these interesting videos, please..!

@Robbie1949 Жыл бұрын

I am an electronics tech and started my teenage years first on radio then television in the 1960's . Here in Australia we didn't have series string heaters and direct rectification from the mains to supply HT to the vacuum tubes. A mains power transformer was always used in Australian made sets as at 240V 50 Hz mains the dangers were considerable with potentially live chassis unless an isolation transformer was used. With only 120V @ 60Hz the potential for electrocution of the operator or tech was considerably less. Another comment is that digital multimeters are not as suitable for this type of repair as an older 20,000 ohms per volt analogue instrument. Especially for reading resistor values and capacitor leakage. A digital meter will lead you up the garden path during logical fault finding, only use them when great accuracy is required, in an older set like this, it's basically not ever required . When calculating a capacitor value to use as a ballast resistor use the capacitive reactance equation ie ; XC= 10 to the sixth power over c x freq x 2 pi , where c is in microfarads. Transpose as required. I was a SGT in the RAAF teaching electronics in my last years in the service. Robert

@cranegantry868 Жыл бұрын

RAAF techs in my day were considered good technicians.

@Robbie1949 Жыл бұрын

Some of the people I ended up teaching sadly would never ever have made top notch techs mainly because they didn't ever have enough interest to apply themselves fully. The same in every field of professional endevour , some actually liked and applied themselves to the profession, some were just along for the ride and it showed.

@kyledavidson8712 Жыл бұрын

Fascinating! Thanks for sharing.

@lucasrem Жыл бұрын

Just never power it up when you work on them, not a big risc that is! Australia is UK/ EU system mixup, you can by local Japanese systems! You restored models, can you upload videos please !!!

@Robbie1949 Жыл бұрын

@@lucasrem If you work on live chassis sets, vacuum tube TV or radios you have to use a 1 to 1 isolation transformer so you can earth the chassis. The same applies to switchmode powersupplies in computers and other equipment. For some fault finding you have to have power on. I don't work on old televisions now, I have a a few old vacuum tube radios to repair but am drawn more to the battery portables which when run from the mains use series string filaments and usually a selenium rectifier or copper oxide stacked rectifier which you replace with a silicon diode and increase the value of dropping resistors as required. measure these with a good quality analogue meter rather than a digital type as they sometimes give false readings especially on resistance ranges. The old AVO 8 was very accurate in this regard, the mark 6 being one of the better types, not so old .

@401ksolar 2 жыл бұрын

Very nice, an old wise guy once said at some point we're all just going to have to be capacitor janitors in the future 😎

@jdflyback 2 жыл бұрын

Thank you!

@ricric828 Жыл бұрын

Cândva reparam tv anii 80_90, video recordere ,radio etc unele erau aduse din vest(europa)trebuiau trase in banda pt partea de est.Frumos si bun totodată aceasta prezentare de un adevarat electrotehnist Bravo 👍👍👍👍

@2true359 Жыл бұрын

Cool hobby! If you had that TV back in 1949 you were a Baller!

@antonnym214 Жыл бұрын

I mean this as a compliment. You are much more knowledgeable about these old electronics than anyone else I've ever known. This is surprising, because you seem like a young person. Maybe still in high school? Very nice work, regardless of age.

@Taketimeout3 6 ай бұрын

Holy moly. Near on a million views for a tv repairman. This proves two things. People like things to be repairable and appreciate the beauty of the design of some older technology. And of course the admiration for this very capable person.

@jerryfacts9749 Жыл бұрын

When I was a kid we had a 1949 Philco TV. It was kept in mint condition. When I was in my late teen years it was given to me, and I kept it maintained. It has been through 2 CRTs. In about the year 2000, I gave it away. The picture quality was very good.

@markshaum8364 Жыл бұрын

I love electrostatic deflection TV's! They always seemed more straightforward to troubleshoot.

@joefarthing5804 Жыл бұрын

You are amazing. I love the way you took us though it, step by step. Truly inspiring. Thank god for people like you.

@scottweisel3640 7 ай бұрын

“I have the CRT cleaned up. I think it looks pretty good.” You are a master of the understatement.

@atmazee Жыл бұрын

This brings back fond memories of watching Mustie1 at my grandad's house every Saturday morning. Great set!

@CaliforniaEBRDude Жыл бұрын

Excellent work, and I'm very surprised how good the image is on that old receiver.

@btruj2507 Жыл бұрын

Awesome video, and well done! I restore vacuum tube scopes, magic eye signal generators and AM radios. I also find the oily paper / wax caps to often be the culprit, but when the chassis are rusty look out for shorted transformers too. I subscribed and look forward to more from you.

@marksgmail66 Жыл бұрын

Incredible... You're a thoughtful, skilled technician to be sure. Thanks for the post.

@bbacon62 Жыл бұрын

I just restored a 1949 teltone 7 inch TV, almost exact circuits as your model, my biggest issue was once i recapped it was the IF was way off. the set just had small screw adjustments in the tuner for fine tuning, took a while to get the sound and video adjusted in the IF stages, i have sweep gens but they to need work, but i was able to finally get a good picture with a strong rf from ma vcr, the over the air boxes dont work so well, Its great keeping this technology alive

@sergiogonzalez1958 Жыл бұрын

Maravilloso trabajo, felicitaciones, ¡que hermoso ver un antiguo TV trabajando bien! Comencé mi carrera hace 40 años reparando tv's a válvula. Amazing!

@gabrielcuevas5837 Жыл бұрын

Aclaro; Sin ofender a nadie. Compare usted a un técnico de esta calidad con los nuevos técnicos de Celulares que van "Cortando las Micas" (capacitores smd) hasta encontrar el corto, o los que solo con programadores van reparando TV's de nueva generación sin la más mínima idea del instrumental y de Electrónica, nada que ver!. Yo también comencé a principios de los 80's a estudiar electrónica, vi de válvulas, de transistor y Circuito integrado, por asares del destino y aún siendo mi pasión la electrónica no me dediqué a eso, fui operador de autobuses en México. ahora en mi edad adulta retomé mi pasión y me mantengo estudiando, ha cambiado mucho el oficio, ahora cualquiera con unas pinzas un multímetro barato ya es técnico y van por la calle dañando los aparatos y dejando en mal a nuestro gremio, eso me entristece pues la gente ya no quiere pagar y si lo hacen quieren que les regales tu trabajo, en fin así las cosas, saludos y me da gusto encontrar verdaderos técnicos en canales como este, abrazos desde México.

@notsuoh16Bit Жыл бұрын

The old ones were certainly a fire trap, I was so surprised with the quality of the picture on the set, so cool, PCBs certainly changed everything.

@andygozzo72 Жыл бұрын

not pcbs as such , but transistors(although here in the uk, a transistorised set in the '70s was notorious for burning up!),, pcbs were used with many valve/tube sets , and many got blackened/carbonised due to heat

@notsuoh16Bit Жыл бұрын

@@andygozzo72 I was mentioning the PCB because moving and transportation of these old sets could of caused the spider web to collapse on itself and make it just what is needed to produce a fire 🔥🔥🔥🔥

@briananthony4044 Жыл бұрын

These are what electronics were when I did my apprenticeship in the early 1970s. Often the problem was a dry joint or a resistor burnt out, or a capacitor gone, or a faulty valve. Bitch of a job finding the problem. In those days the serviceman went to your house and worked on the TV.

@briananthony4044 Жыл бұрын

We didn't get TV broadcasting here in NZ until 1960 and we brought our first TV, an Admiral 28 inch, in 1961. We had the only set in the neighbourhood, so after school, kids would arrive that parents sent around, without asking mum who had to look after them. The parents were quite put out if they were told to not send their kids around.

@stevesynth Жыл бұрын

👍 very interesting and takes me back to my youth 😱🏴󠁧󠁢󠁳󠁣󠁴󠁿

@JavierAlbinarrate Жыл бұрын

I love these electrostatic sets. Hint: These sets have an RF oscillator to obtain the very high voltage for the CRT, and sometimes the voltage is lower than expected despite everything around it being fine. Sometimes it's the RF coil which got moisture and lowered its Q or even somewhat shorted some spires and that is a coil you definitely don't want to rework. If the voltage drop is not too much, you can seriously raise it by simply inserting a ferrite rod inside the air core. Ferrites from switching power supplies are great for this. And that gives the extra bump the voltage needs without making any serious rework nor modifying anything.

@lucasrem Жыл бұрын

Javir Albinarrate This TV is magnetic deflection Radar is oscilloscope CRTs, electrostatic deflection!

@JavierAlbinarrate Жыл бұрын

@@lucasrem it is electrostatic. It uses a 7JP4 crt which you can see at 26:40 in the schematics, and at 34:27 you can see that it lacks a yoke. I have 3 of these, 1 Motorola like this one, and 2 Silvertones, I also own a Pilot with 3 inches screen. These "portables" were common in the late 40s. BTW radars which used PPI presentation used magnetic deflection with a servo rotating the yoke, crazy stuff, I own one Decca radar from the 50s. And circling back to my original post, as they are electrostatic they don't have a yoke, hence there is no flyback transformer to take advantage of, hence they used a dedicated tube as an RF power oscillator (usually a 6V6) with air core transformer. I hope that clarifies it 😉

@jonka1 Жыл бұрын

@@lucasrem Magnetic deflection????????????? Have you actually watched the video?

@ArneChristianRosenfeldt 4 ай бұрын

So a tesla coil to power. I wonder why no arcade vector graphics was powered by electro static. X-Y mode on a scope is goes up to 20 MHz. Could draw 3 million lines per second ( turn off the gun a the vertex, fly a loop). 50 thousands lines per frame @ flicker free 60 Hz @@JavierAlbinarrate

@Duddie82 Жыл бұрын

I can imagine the day this was brought home to a family, and the kids and parents watching on this. How excited they were. I really enjoy watching your videos!

@CoopyKat Жыл бұрын

That's pretty amazing that people in 1949 would have seen a pretty good picture, in spite of what I thought those old TV's might have looked like when new!

@romanval69 Жыл бұрын

The interesting thing was that almost all daily TV programs was either performed live or was on film (since videotape didn't exist yet!)

@NapoleonBonaparde Жыл бұрын

Watching movies on these old TVs has a certain atmosphere to it.

@ralphfurley4217 Жыл бұрын

I never imagined I'd watch a KZfaq video on a 1949 TV set.

@7777Robo Жыл бұрын

Brilliant. Thank you very much. Very nice video. Also very interesting, that just capacitors did not last for such long time. Rest of the set was holding on. Picture on tube is impressive for such old screen development. Nice piece of work of technical development. A lot of inspiration and gratitude to electronic development.

@andygozzo72 Жыл бұрын

many capacitors do last, ceramic ones very rarely fail, 'modern' poly types almost always last ok, but some been known to drop in capacity with use, especially if subject to high 'current', such as in motor run caps

@a.bergantini4129 2 жыл бұрын

Awesome work!

@jdflyback 2 жыл бұрын

Thank you!

@catalino8010 Жыл бұрын

this is just blowing my mind, i am so in love of these old stuff

@johnrebus1641 Жыл бұрын

Amazing picture quality & detail for a 73 year old set

@rbmwiv Жыл бұрын

Neat video and am impressed by your skill. Are those old tvs worth rebuilding or you just do it for a hobby. I’m really curious because I’ve got all kinds of interest that no one else but a few will share. I’ve been into electronics my whole life and have always wanted to know how everything works.

@mutthunaveen Жыл бұрын

In your lab, i don't know why your laptop also looks like vintage one.. 😁

@excaliburwarlocks5508 Жыл бұрын

That's amazing that you're able to restore those that's a lost art 🎨.

@spookyboo3164 Жыл бұрын

if my mate roger was around hed have loved your channel i remember he rebuilt an early radio the ones before superhete came on the scene the my friend was genius when it came to fixing electronics

@martinwhitaker5096 Жыл бұрын

Just curious - why don't people use a pair of current limitable DC bench supplies - one for the filament string and one for B+ when testing. That way you can have the filaments running at full temperature then bring the B+ up slowly with a much lower current limit?

@k8zhd Жыл бұрын

From my own experience, the reason people don't do that is because it requires a couple of current limitable DC bench supplies of the proper size. Those aren't cheap or small items for a hobbyist. Also it requires that you disconnect the B+ and heater circuits to use external supplies -- lots of extra work. Most antique TV troubleshooting doesn't require that level of care, particularly if you start off by assuming that all the electrolytics are bad (which for 50+ year old electronics is a near certain situation) and replace them.

@martinwhitaker5096 Жыл бұрын

@@k8zhd I guess I've been lucky on eBay - I have a pair of 300v / 3A supplies that didn't cost the earth!

@k8zhd Жыл бұрын

@@martinwhitaker5096 Wow! 900 Watt supplies -- they must be huge!

@martinwhitaker5096 Жыл бұрын

@@k8zhd they're big, but not huge. They are switchmode so they may put a bit of noise out, but never had a huge issue with that when working on radios.

@vesstig Жыл бұрын

I love that people are maintaining these pieces of art that they are, we dont manufacture things like this for general public like they used to and wow does it show

@CopperstateBassets Жыл бұрын

I have this same set. It's one of the first ones I learned to work on in the 1970s. It's nice to see an early tv working g

@Julis9526 Жыл бұрын

the "extreme" idea of restoration of the tail component of the TV is still the tube as well as the screen. you are great👍

@TheBananaPlug Жыл бұрын

Mustie1, Awesome! love his Sunday videos. This repair also good stuff, thanks for sharing.

@ChickenMcThiccken Жыл бұрын

when you pulled up the schematic. it brought back memories why i got an F in electronics class.

@Baneslayer Жыл бұрын

Thank you for this amazing video. As a tech geek and child of 1981, I greatly appreciate this footage more than I can express in this comment.

@wayneyadams Жыл бұрын

I wish i had held on to all the TV repair manuals and spec sheets from the 60s, 70s and 80s that my father had.

@M_Sp_ Жыл бұрын

One of the TVs my school still using when showing us films in class

@hi-techservise Жыл бұрын

🥰 электронное отклонение лучей, вместо магнитной системы.... Видео просто супер, смотрел и ностальгия накатила. Electronic deflection of rays, instead of a magnetic system .... The video is just super, I watched and nostalgia rolled over.

@MasterBaker2020 Жыл бұрын

Never thought I’d see Mustie1 on a black and white tv from the 40’s!

@darellsimons2687 Жыл бұрын

I enjoy watching a old TV 📺 it's a great feeling 😊

@towerman75 Жыл бұрын

Amazing thing about TV's of that era, they were no more than a large screen O'scope. Great video.

@HilaryCheng Жыл бұрын

A 73 yrs old tv , after fixing it, the quality is still very good.

@kevinbautsch Жыл бұрын

Another person who appreciates where our technology has come from. Kudos to you!!!

@bobheide Жыл бұрын

Old TV sets are amazing - Reminds me of the old days, when family members would take turns getting up off the couch to change the channel. There was only four channels at the time.

@piccalillipit9211 9 ай бұрын

*THAT PICTURE QUALITY* is utterly amazing for a TV made in 1949...

@WinrichNaujoks Жыл бұрын

So nice to see it working, and working well! It would be great to have the case refurbrished as well.

@RandomRetr0 Жыл бұрын

Far better picture than I thought attainable from one of these! I have one I picked up a couple of years ago on a whim and still haven’t gotten into it because when I got it home I cold clearly see it had been modified, and I have no idea what the mods were even trying to accomplish. There’s an extra above-chassis board with components mounted on it, and the wiring looks like spaghetti

@davewolf8869 Жыл бұрын

I don't believe how incredible that picture looks... On a set that "old"... Brings back memories of trying to get these tube sets working but knowing almost nothing as to the how... Days before the internet

@dale6993 Жыл бұрын

Awsome video! I'm retired tv repairman worked on solid state only...never learned the tube stuff. Great job!!

@frankkoslowski6917 Жыл бұрын

Excellent Troubleshooting! One feels honored to see this.😃 You would have loved the power triode tubes from a 1950s Mass Spectrometer Unit we had sitting in the vaults of the cellar of the Technical University in the 1970s! 😮‍💨 The troubel was at that time, as Electronics Technician Apprentices, we knew what we had, but were simply too stupid to do something with them, such as building a Pirate Radiostation around those things. 😭

@Tims_Projects Жыл бұрын

Brilliant, it gives you the feeling of viewing the past through a time machine.

@jrsgarage7623 Жыл бұрын

My dad used to get all the free inop TV's that he thought he could fix. He used to usually fix them and he would have me help. If a tube don't light up or looks black and burnt it's usually bad. So I'd dig in the several different pails and boxes he had of these tubes till I found one that would fit and looked similar or same part #. Miss those days.

@TheSuperCaralho Жыл бұрын

One of the most fascinating videos I've seen in KZfaq !

@mgdurandolo Жыл бұрын

Wrapping up by piping in KZfaq into that set really made me smile

@georgecovetskie6717 Жыл бұрын

That was fun. Brings me back to the days ( 1971 to 1974 )when I seen these in the basement of the TV shops I worked in. When we had time we would pull the old sets out of the basement and try to get them working again just for fun. We would display them running by the front counter. People alays were amused by them.

@kordta Жыл бұрын

The quality is great! That picture seems good enough to watch!

@NicleT Жыл бұрын

This is amazing!! And seeing a KZfaq video in that vintage CRT is absolutely mind blowing. Bravo!!!

@curtclock 6 ай бұрын

Wow, When you know your job you know your job. I have a 1949 TV set I have been looking to repair for ten years now. It doesn't seem to be getting any closer to Picture! Oh well I could fly easier than what I saw you just do. Very Nice Job!

@UQRXD Жыл бұрын

Round CRT. I was so happy far as repairs go when the tube set stop being made. Good luck with the repair.

@alexkha Жыл бұрын

Replaces most of the components... "Wow, it's working now!" This video is fun to watch, but then again it makes me think: does liking to watch these videos mean i'm old? But then again, how lucky we are today that we don't have to carry those heavy tv sets around anymore, lol!

@kens97sto171 Жыл бұрын

Another great video... And A Mustie 1 viewer apparently. Love his channel too. Fixing things that others consider junk.. Love it...

@walterdavey3276 Жыл бұрын

Excellent! Love the way you are doing this. Reminds me of stuff I used to do about sixty years ago!

@adventureswithrusty2012 Жыл бұрын

Great restoration! Resolution is surprisingly good for the small size and age of the tube.

@grillsandaxlegrease3578 Жыл бұрын

Back in the early 80's Dallas down town by the old Heathkit shop had an awesome electronics swap weekend. I just found your channel finding it very inspiring! I have a lot of tube radios to repair as well as automotive grade versions.

@KpxUrz5745 Жыл бұрын

This is wonderful to see. I could watch hours more of work on early tv sets. Now I really regret selling our old tiny screen Philco in the large mahogany cabinet with doors. The small picture tube was round on the sides and flat on top and bottom. Tuning stations had no "click" on the channel, it was pure analog dialing until it gets the best picture, just like tuning an old radio. This was the set I watched the sad Kennedy news on, the arrest of Oswald, and Jack Ruby shooting him point blank. And in 1969, the first moon landing! Back when we finally sold it in a yardsale, I never imagined that later I might get interested in trying to get it running again! It could well have been still working in the 90's when we sold it!

@dto2unpoco727 Жыл бұрын

I love what you do with those antique tvs. Nice job!

@mikedmalott Жыл бұрын

Such a beautiful piece of history. At 7” you wouldn’t expect a bad picture but I didn’t expect such a great picture. Nice work!

@wayneyadams Жыл бұрын

That's an advantage small screens had; 525 lines packed into that small space makes incredibly crisp images.

@cyn5526 Жыл бұрын

This is unbelievably cool, thank you for showing your process!

@karlament6939 Жыл бұрын

Nice set all the electrolytic caps a lot of those capacitors going to have to go you got a lot of restoration ahead of you but I like Osiris that's man nothing is better than these old TV sets with warm glowing tubes love it thanks for the video