1950 Chevy Pickup Truck - Part 3: Mounting the A/C Unit

No video

1950 Chevy Pickup Truck - Part 3: Mounting the A/C Unit

Рет қаралды 58,243

Күн бұрын

Mounting the coil pack properly to the intake manifold. Pulling the condenser out and remounting the fan with new brackets. Mocking up the air conditioning unit to take measurements for the A/C and heater hoses. Adding a bulkhead plate to the firewall to run the lines through. Cutting and crimping the lines to the correct length before installing them a long with the unit. Reinstalling the condenser and fan to the truck and fixing a mounting hiccup a long the way.

Пікірлер: 138

@HsPerformanceWi 2 жыл бұрын

Whomever is filming and editing this channel deserves much respect!

@michaelmendoza820 2 жыл бұрын

One of the best channels on KZfaq. Keep them coming big homie.

@rosstimpson5546 2 жыл бұрын

Definitely one of the best channels on KZfaq ageeed!

@nathandowns369 2 жыл бұрын

Mike, you should make a sheet metal tub for your plasma table. Fill it with water so your parts are cold after you cut them out and it helps with warpage too and cuts back on smoke as well. I have one on mine and i love it. Love the videos!

@BellosKustoms Жыл бұрын

Yeah that's a good idea but sometimes it tempers the metal and then it cracks when you make a brake on it

@nathandowns369 Жыл бұрын

@@BellosKustoms that is very true I forgot you brake alot of stuff. I'm too broke for a brake so I weld all my bends haha

@jhwk1970 2 жыл бұрын

I’d love to see Mike’s invoice for the AC installation.

@BellosKustoms Жыл бұрын

Lol you don't wanna see that homie

@Aux1Dub 2 жыл бұрын

He said “paint or it gets rusty” then you see a sticker on the lift that says “rust is not a crime” lol

@joeybaker2480 2 жыл бұрын

I like how Mike stamps all his custom parts. No mistaking who fabricated anything when is comes to Bello's Kustoms!!!

@manofsteel2211 2 жыл бұрын

Watching you guys makes me want to go dwn there on my own dime just to hang out...building custom cars and having a great time doing it...thank you for showing people that passion pays off

@paulgoolsby6120 2 жыл бұрын

No pain, no gain. The humor takes the edge off it. Top quality Boss!👍

@ivycycles 2 жыл бұрын

The struggle is real. I could feel your aching arms under that dashboard. Loved all the fab work, especially for getting that condenser to cooperate with the space.

@Angelcf62 2 жыл бұрын

I just stumble in your channel and I am Hooked now, love all the pride you take doing your builds, No chicanadas !!

@bonytenn2908 2 жыл бұрын

Watching this is the best way to end a great weekend, all hail King Mike

@kevinkelly1523 2 жыл бұрын

Mike, another great episode. Love watching you and your partner work together. Thanks

@danspak1671 2 жыл бұрын

PURE EXCELLENCE BY BELLO'S KUSTOMS!!! GREAT VIDEO MIKE!!! HAT'S OFF TO THE CAMERA MAN!!

@mikedavis3841 2 жыл бұрын

Always did want to see a AC installation.

@tacogold 2 жыл бұрын

Bello's always with good content...firme

@michaelkane8359 2 жыл бұрын

Nice to see the Zephyr in the back ground. Can’t wait to see that car finished

@Bob0sModelFabWorx 2 жыл бұрын

I am officially out of comments but I still admire the skill and workmanship. But not as much as I admire the attention to be a top quality shop for every build. Nicely done.

@joebloggs6206 2 жыл бұрын

Love the radiator brackets and the COOL job on the AC🥶👏

@frederickherring2284 8 ай бұрын

See the work that has gone on in to that one bracket that goes through the fire wall for the air con. that is craftmanship to be sure.

@mikebeidelman6051 8 ай бұрын

Mike, Brother your work is awesome, you have saved the owner of this truck from 10,000 disasters in the coming years. like you I was taught to think about the next man who has to follow my work. mike

@putinkhuylo 2 жыл бұрын

Man, trying to stuff that a/c unit back under the dash is like stuffing 10 pounds of shit into a 5 pound sack. I'm glad Carrapila was there to keep you straight, Mike. 😂

@oldblueshhrchannel1847 2 жыл бұрын

Thanks for the update on the pickup truck. It’ll be real nice when you get finished.

@SouthernRodsandClassics 2 жыл бұрын

by far this is my favorite Kustoms shop. Following from New Orleans LA

@westsideflyer7559 2 жыл бұрын

"Clean, clean, pinky ring!" Always looks good!

@billb2094 2 жыл бұрын

Pure Mexican Ingenuity (PMI) Great rework to give it a professional appearance by Locochon. 👍🛠😎

@davidbarnes4900 5 ай бұрын

Love the music and cutting up in the shop , I miss that shit ! Caterpillar has a good attitude and goes along with yo brainwork ! 🧠 Not everyone gets your visions but you make it fun !

@joeybaker2480 2 жыл бұрын

Lol @ " Its almost like we're professionals." Mike you are more than a professional you're a top notch master craftsman

@terry3665 2 жыл бұрын

I've never had any luck running two fans, one good one pulling on the engine side should be enough, that's all we use even in Phoenix!

@timferriss905 2 жыл бұрын

Hello Mike. When I’m under a dash or even under a car with jack stands, geez my neck, back, and legs. I’m 63 and it don’t get any better. Truck will be tops when you’ve finished. Keep having fun.Tim.

@colinwhite2401 11 ай бұрын

Mike is one of the best builders and fabricators I've come across. Love watching him work. Like his attitude, sense of humor, and he's a hard worker.

@joseoliveros678kustoms 2 жыл бұрын

Another good video Mike, comedy was hella funny. You and Carapila are fun to watch, can't wait for the next one bro👍🏼😎

@dustypendleton6694 Жыл бұрын

My father was the sort of carpenter who would start with an empty lot and end with a finished house; doing everything from concrete slab to interior trim and cabinetry. I had long ago felt that sort of total grasp of all trades had vanished but Bello's has shown me that here is the sort of genius and mastery of craft and tools still lives and someone can start with nothing but finish with museum grade quality results. Rock on, Mike. Rock on. You are the man.

@rickbarger5161 2 жыл бұрын

Nice job on that AC Lines Dude that is a tight fit Nothing like watching an expert work all your shit is 1st class nice job love the video thanks

@chiefvilla3167 2 жыл бұрын

Damn homes. Prefab straight from Home Depot Vista Avenue. Diego School of knowledge. Los Vatos Locos. Cheublé. Clearwater.🤙🏾👍🏽👏🏽🙏🏽😁😊🙋🏽‍♂️😎.

@heribertorodriguez4857 2 жыл бұрын

Hey great work love your post. I'm working on a 47 chevy PU and the guy before me F'ed everything up now I have to correct all the crap. Saludos des de Mercedes Tejas.....

@seafieldgrant6957 2 жыл бұрын

Mike you are the best ! thanks for video.

@gkanderson92 2 жыл бұрын

Love watching the “bracket master “ at work .

@user-db3qw8bo1t Ай бұрын

Love the show and how you guys get along

@josealfredocuevas 2 жыл бұрын

Excellent work You're a Grand Master at this Lokochon!!!

@Mr.Avuncular Жыл бұрын

I feel you homey working upside down under a dash with chit poking you in the back I totally get it! Love the channel, you two are funny as hell to watch ! Keep up the good stuff my friend.....suave😁

@kingfunk9336 2 жыл бұрын

Mike and CCR rocking! Good Times

@djgeefunk4090 2 жыл бұрын

One of the best channels on KZfaq LOKOCHON😉

@brianwillerton8659 2 жыл бұрын

I'm starting to think Mike's jealous of Carapilla's hair! heh-heh-heh!

@TheOldaz1 2 жыл бұрын

Another piece of the puzzle done properly. Good job guys, whew!!

@milesharget7251 2 жыл бұрын

really glad to see some captions! can finally figure out what folks are saying even with the tool noises

@Iamwolf2348 2 жыл бұрын

Ese Mike you're right, you are a fabrication genius. Beautiful work installing the AC and fans on the Trokita. Ay los watcho.

@mariocandido7204 6 ай бұрын

Nao me canso de axistir..esses videos...nao me inporto se ja faz um ano..mas oque inoorta eo trabalho entregue em cada serviço..prestado ..por esse metaleiro a nos telespectadores...amante de carros...Raros

@jenniferroble8702 2 жыл бұрын

Always happy to see a new video posted. Your attention to detail is amazing. You are truly a master of your craft.

@406gto Жыл бұрын

Awesome work Sir! I always thought (part 2) that you needed to single flare fuel line, even if it was going into a rubber line w/a. clamp. I guess it makes it easier to swap the rubber section if needed? Enjoying the vids!

@jesusgonzalez1241 2 жыл бұрын

Ajá la jalea chulada de jales batos que se escuche ese rap saludos desde México

@orangelicious33 Жыл бұрын

Great to see real men with mad skills.

@StansboyJohn 2 жыл бұрын

I like watching Bellos. It adds to my repertoire of Latino cuss words. Haha

@craigoliver4526 2 жыл бұрын

I Love watching you work Mike ! U a Bad Man or UDAMAN! It Ain't nothin that you can't figure out on a Car or Truck , Can't wait for the next Post (Hurry up:) BIG DAWG

@apexmetalrestoration2805 2 жыл бұрын

damn. That looked like 1/2 inch of bondo on the firewall. I wouldn’t want to see what’s underneath

@NZMOPAR 2 жыл бұрын

i was thinking the same thing .. yuck

@65cj55 2 жыл бұрын

The majority of these Cars are like that..

@wornshoes7975 2 жыл бұрын

When your inner Mexi-CAN wins over your inner Mexi-CAN'T. Adapt and over come!

@johnkranz4004 2 жыл бұрын

Excellent job Mike looking good

@dalesheffield7097 8 ай бұрын

The simple brake job leads to wiring, AC, ect. But its done right and thats how its done!

@jaimemendoza7942 2 жыл бұрын

LOKOCHON TIME!!!

@erichgeorge7093 2 жыл бұрын

You are the bracketmeister extraordinaire!

@lisandrorivera9645 2 жыл бұрын

Saludos Bellos, you Rock bro.. from Ocala Florida

@michaelosborne513 2 жыл бұрын

Many improvements in that truck since you started on it . That owner should carry an extra coil in that truck for when it fails far from home . Ask me how I know . has happened twice on two different cars they just aren't the quality they used to be from MSD they look good but have a problem with windings inside .

@RubenGomez-kf8rq 2 жыл бұрын

Ready to order some c notches & 2link lol for my ranfla, stop f***king around already homie, lol

@carotherscontent 2 жыл бұрын

So much bondo i thought the cab was fiberglass at first hahaha

@bradleyjanes2949 2 жыл бұрын

Great video 👊

@dannysilejay 2 жыл бұрын

Master of Making Brackets, Great Cad Work. Let Chopolene jump in LOL Showwwww...😂

@mathieumendez4337 2 жыл бұрын

This night I saw my first Starlink in south France: More then one hundred flying shits in the evening sky. Nothing compares to Bello's...Peace

@jakespede8522 Жыл бұрын

Bracketman!! Awesome.

@davidconley3610 2 жыл бұрын

Pinche Kattapilla is the King of Air Conditioning 😝

@brendonthompson1691 2 жыл бұрын

You the shit brother love wacthing you work

@MURDAHSIDE 2 жыл бұрын

CARAPILLA AKA McLOVIN ❤

@rodparker4514 2 жыл бұрын

More please young man !

@randallbeasley646 Жыл бұрын

Man, you two should work at NASA bulding rocket ships to Mars

@carlhadaway5292 2 жыл бұрын

Cool Mike liking it 👌

@dennisschickling2249 2 жыл бұрын

Great Video. #STAYSAFE #PHILLYPHILLY 🇺🇸

@adoldlc.c.7337 2 жыл бұрын

Sube videos de la studebaker pickup por favor!

@floridian7143 2 жыл бұрын

Thanks for sharing!

@adrianlois6284 Ай бұрын

Jajajaja jajajaja peleando con Carepilla 😊 Saludos 👍 muchachos

@oscar_dubs 2 жыл бұрын

mike is solid as fuck man. keeps the content super real. keep it coming homie.

@secretlee7957 2 жыл бұрын

Mike ,you are the frickin best,that counting cars dude ain't sht,compared to you man..fk ya ☮

@dennisschickling2249 2 жыл бұрын

Wow. I'm #1 #STAYSAFE #PHILLYPHILLY 🇺🇸

@alex.martynenko 2 жыл бұрын

Custom wrench 😊👍🏻

@superiorsteeljack 2 ай бұрын

I Love Catapilla! lol

@jeffbrown557 2 жыл бұрын

PROFESSIONAL 100 %

@joevargas9524 2 жыл бұрын

GIT DOWN LOCOS MY RESPECTS 👊🏽👊🏽👊🏽

@ivanxavierdesouzasouza9278 2 жыл бұрын

O melhor 🇧🇷🇧🇷🤟🤟

@andresaguilar4993 Жыл бұрын

Kicking ass!!!

@adoldlc.c.7337 2 жыл бұрын

Saludos cordiales!

@Eggcellent81 2 жыл бұрын

LOKOCHO STYLE 💥

@salsanchez1884 2 жыл бұрын

CHICANADAS ...LOL

@Cognacvsop1873 3 ай бұрын

Is they still in business?..?

@jaimemendoza7942 2 жыл бұрын

You should name him cajapila bro

@garagempedalcarzonta3387 2 жыл бұрын

Parabéns...👏👏👏👋Brasil

@MarineGrunt 10 ай бұрын

It seems like it would have been cheaper to pull the engine , Trans and exhaust...then start over . Changing everything you had to change to make it right had to cost a fortune . One thing though , it will be right when it leaves the shop .