No video

1975 Norton Commando Mk3 restoration Part: 3 Starter for the Mk3 and parts information

  Рет қаралды 2,148

Jesse's Vintage Garage

Jesse's Vintage Garage

Күн бұрын

In this video we talk about the starter we are going to use for the Mk3. we then go on to explain how to convert and upgrade the starter so it can work better and last longer. We also talk about the part numbers used in the upgrade and how to find them.

Пікірлер: 12
@raymondvoigt7336
@raymondvoigt7336 2 ай бұрын
Excellent! Thank you 👍
@stupollock6851
@stupollock6851 Жыл бұрын
Thanks for the great video. Over -32 C here today so I think I’ll drag mine out to look at. Did the screen shot of the parts. Thank you.
@jessesvintagegarage765
@jessesvintagegarage765 Жыл бұрын
Awesome, glad to help,
@CHRnorton
@CHRnorton Жыл бұрын
The wear on the shafts and bushes does not have to happen. But you need to re-lube it every few years. Sometimes you have to replace bushes, seals and brushes. A good AGM battery is a must, they last a real long time, too.
@TornadoCAN99
@TornadoCAN99 Жыл бұрын
Nice job with some great tips. BTW, I tried copying the video link to the Access Norton forum to promote it there, but it seems you have the upload set to not permit playback on other sites. We see this text on the forum: "Video unavailable Playback on other websites has been disabled by the video owner Watch on KZfaq" Maybe you can check the options on your KZfaq upload page to allow this?
@jessesvintagegarage765
@jessesvintagegarage765 Жыл бұрын
Thanks for the great comments and I allowed the video to permit playback on other sites so if you want to promote it that would be great if there is any other one you think of promoting just let me know I appreciate it and thanks again,
@TornadoCAN99
@TornadoCAN99 Жыл бұрын
@@jessesvintagegarage765 Thx...I checked my post on AccessNorton and your video now displays/plays there. I had seen this problem on another one you posted...the MK2 Norton 750 cylinder head fitting where I wanted to show forum members how you found those tiny leaks in the cylinder block stud holes.
@jessesvintagegarage765
@jessesvintagegarage765 Жыл бұрын
@@TornadoCAN99 I allowed that whole 6 part series as well, thanks again we appreciate it,
@gpo6581
@gpo6581 Жыл бұрын
I don't have the equipment to do this. Can you rebuild my stater?
@gpo6581
@gpo6581 Жыл бұрын
Who did the machine work for you? Like the mod but need someone I can trust to do the work. Thanks
@jessesvintagegarage765
@jessesvintagegarage765 Жыл бұрын
We know someone who has access to a lathe, that allows us to do all of our metal machining
@gpo6581
@gpo6581 Жыл бұрын
@@jessesvintagegarage765 Do you have a phone# to call. Thanks
1975 Norton Commando Mk3 restoration Part 4, Rebuilding the Mk3 transmission
1:37:29
Jesse's Vintage Garage
Рет қаралды 4,2 М.
Magic? 😨
00:14
Andrey Grechka
Рет қаралды 11 МЛН
天使救了路飞!#天使#小丑#路飞#家庭
00:35
家庭搞笑日记
Рет қаралды 88 МЛН
КАКУЮ ДВЕРЬ ВЫБРАТЬ? 😂 #Shorts
00:45
НУБАСТЕР
Рет қаралды 3,2 МЛН
🩷🩵VS👿
00:38
ISSEI / いっせい
Рет қаралды 21 МЛН
Spintron demo showing Norton cam & lifter wear
5:24
Jim Schmidt
Рет қаралды 10 М.
Norton Commando Swingarm Roller Bearing Conversion
13:03
British Cycle Repair
Рет қаралды 2,6 М.
1975 Norton Commando Mk3 restoration Part 9, Wiring and brakes
1:36:25
Jesse's Vintage Garage
Рет қаралды 2,7 М.
1975 Norton Commando 850. Will it start?
13:41
Ben's Britishbikes
Рет қаралды 4,6 М.
1975 Norton Commando Mk3 restoration Part 6, The frame and swing arm
1:08:47
Jesse's Vintage Garage
Рет қаралды 1,8 М.
AMC gear box build Norton P11
14:38
Dirty Shirt Richter
Рет қаралды 7 М.
Magic? 😨
00:14
Andrey Grechka
Рет қаралды 11 МЛН