Thanks very much for posting that. I'm chasing a problem with mine cutting out/not starting. The float bowl furthest from the fuel intake doesnt have gas in it. I'll try copying this manoeuvre to find the blockage/problem. 🏍🏍🏍
@thetrailneverends29492 жыл бұрын
Love to hear more of the history of this bike and yourself (stolen and mileage rolled back...LOL). I had the pleasure (and pain) of owning a 84/86 VF500 back In the mid 90s. It had a rough past, and my time with it was short, but it was my 1st true sport bike. As such, the little Interceptor will always hold a special place in my heart.
@bryansprojects35702 жыл бұрын
I have some more work to do on this bike at some point maybe I will include some of the history in that video.
@matttriestodothings4 жыл бұрын
"In our storage container with all the other junk we don't need around the house." Get outta here, you gotta put that bad boy in the living room! Were you ever able to get all 4 float bowls off without removing the carburetors from the air plenum? I'm convinced that it's only possible to remove three of them, and I tried for quite some time before giving in and just breaking the entire thing apart for a thorough cleaning. Nice work on getting the 'ole gal running.
@bryansprojects35704 жыл бұрын
I have never had to dismantle them from the plenum. It takes some doing but they all will eventually come off. I have one idle jet plugged already so I need to do it again .Another video on this bike soon. Stay tuned.
@matttriestodothings4 жыл бұрын
@@bryansprojects3570 good deal. Maybe I'll have to try the Chinese finger puzzle of removing the 4th bowl sometime again. Rebuilt a pair of '84 carburetors this winter, but it would be nice to know I can just pull all the bowls without splitting the rack in the future if I'm just checking in on it. Thanks for the response.
@mikemo19644 жыл бұрын
If it is available, try using ethanol-free fuel. It will save you from having to clean the carbs after the bike sits.
@bryansprojects35704 жыл бұрын
I have been using ethanol free fuel in everything that sits anymore.
@Sarrus253 жыл бұрын
Pro tip, skip to 9:00 to see the bike actually running
@matj32963 жыл бұрын
I just bought one for $500 to restore... Wish me luck 😆
@bryansprojects35703 жыл бұрын
Good luck. I will be doing another video on mine soon.
@EazyRed2 жыл бұрын
im literally on the verge of getting one the same price!
@borntobewild8462 жыл бұрын
@@EazyRed I was given one that sat in an air conditioned /heated garage. Don't know what I will find as it has not been on the road since 1992. But it's all there and complete.
@nathanstorck33484 жыл бұрын
Are both jets hallow? I have tried and I haven't had luck getting anything through the idler jets. Also, I can't get my fuel pump to run even if I connect it directly to a 12 volt dewalt battery. Any ideas or ways to bypass the pump? When putting the carbs back on the bike, do you insert the rear or front carbs into the boots first?
@bryansprojects35704 жыл бұрын
Both jets are hollow. The holes are very tiny. I have soaked them in carb cleaner and used a hair sized piece of wire to get through them before. Getting the boots on is difficult however you do it. I think it works best putting the rear on first just because there is more leverage to push the fronts on.
@nathanstorck33484 жыл бұрын
@@bryansprojects3570 Thanks for your help!
@thankyou74913 жыл бұрын
@@nathanstorck3348 gravity feed it! That works also!