take it out for a ride and give it a couple of good full power shifts. that will tell you what you have. tatro

they suck because a ball bearing will never take the load that a roller bearing will. you only use the ball bearing with a belt drive and they fail all the time. i like using the bearing race with the stop lip on it and the stock roller bearing. it fixes the problem. s&s cycle and mid-usa makes these races. tatro

@@TatroMachine VERY HELPFUL, Thanks Keenan! I saw that the Improved Inner Primary Bearing Race is For 2008-Up only. I gather they don't work for Evo?

@@kennethwise7108 Evo . Clutch hub bearings are from 1983 to 1996. Then they changed over to a twin cam basket from 1998 in the basket goes to. 2006. Optimal is to have an Evo with a 98 to 2006 basket. But if you change over you have to change the inner primary bushings and starters and things like this.

@@MrChopemup thanks! Appreciate it

i think the crank bearings would be more. tatro

No it’s not . You can find them cheap they are the same as harley just not with the harley name . They’re about 15 bucks . Some sealed and open . Do some investigating . Measure the bearing and you’ll find it . Harley doesn’t Go out of their way, to, make bearings to be different . They only do ,,if they have to . So a typical clutch hub bearing will fit even for instance, a Japanese transmission...etc or other applications .

@@MrChopemup thanks!