1997 Jeep Wrangler Steering Knuckle

Рет қаралды 572

8 ай бұрын

Replacing the worn out steering knuckle on my 97 Jeep TJ
Email: futuraforce@gmail.com
Products in this video:
Steering Knuckle Right:amzn.to/47vBHAH
Left:amzn.to/3uyj0xC
Caliper slides:amzn.to/46vGGzZ
Rubber Dust Boots:amzn.to/46viAWa
I am a member of Amazon Associates. Purchasing through the links is a good way to support my channel. I get a small commission and it cost you nothing additional. Thanks!

Пікірлер: 27

@ForceBuilt 8 ай бұрын

Email: futuraforce@gmail.com Products in this video: Steering Knuckle Right:amzn.to/47vBHAH Left:amzn.to/3uyj0xC Caliper slides:amzn.to/46vGGzZ Rubber Dust Boots:amzn.to/46viAWa I am a member of Amazon Associates. Purchasing through the links is a good way to support my channel. I get a small commission and it cost you nothing additional. Thanks!

@Pete-from-Tn 8 ай бұрын

Steve thanks for doing these videos. Also thanks for the headlights. As for powder coating stuff. I have a power coat gun and your welcome to use it. An old oven to bake them in works. Or I have a commercial oven that will hold them.

@ForceBuilt 8 ай бұрын

Your are welcome and congratulations! I have a full powder coating setup here. Thanks for the offer!

@leosky38912 8 ай бұрын

Thanks for the video. I see you do things the right way and dont take the cheap way out. I actually found this channel due to trying to fix a 97 4 cylinder TJ I picked up for my kid and I to work on together so he has a vehicle when he is 16 and has an idea how to work with his hands. Thanks for all you do.

@ForceBuilt 8 ай бұрын

Oh, thank you so much! Congrats of working on your own Jeep. That is a great way to spend time with your boy! Don't hesitate to ask questions. I'll be glad to help if I can.

@timcarr4847 8 ай бұрын

Steve you have inspired me to continue to build my project Jeep. Keep up the good honest work much appreciated.

@ForceBuilt 8 ай бұрын

Thanks Tim. I thank you for your support!

@CarbonsDIYGarage 8 ай бұрын

Great video! You’d think with as much effort Previous Owner had to put into that “fix,” it would have been simpler to just replace the knuckle and caliper. I’ve wondered how easy it would be to replace the knuckle. No ball joints to press out and looks like wheel hub came out pretty easily. Nice!

@ForceBuilt 8 ай бұрын

That is what I was thinking also. A lot of effort into the Jerry Rigging. Yeah Ed, It wasn't a bad job at all. Thanks for your continued support!

@dougphillips8389 8 ай бұрын

Another GREAT video! Always something going on with the TJ's.. if you own a TJ and have a KZfaq channel then you will never run out of content. LOL. Congrats Pete!

@ForceBuilt 8 ай бұрын

I would have to agree with you on that one. I thought it was because mine was in such disrepair. I have parts that still need replacing when funds arrive lol. Thanks for stopping and watching!

@wildbluewilly1949 8 ай бұрын

Thanks for sharing this…. It’s on the To Do List!

@ForceBuilt 8 ай бұрын

You are very welcome. Not a bad job. Good luck!

@NoName-yr1jv 8 ай бұрын

Well done 👍

@ForceBuilt 8 ай бұрын

Thank you 👍

@17chopper26 8 ай бұрын

another great video.

@ForceBuilt 8 ай бұрын

Thanks!

@bernardaborita4631 8 ай бұрын

Awesome!!!

@ForceBuilt 8 ай бұрын

Thank you!

@marloncausey392 8 ай бұрын

I love your videos and your advice to me on the timing chain was spot on. I bought my little 99 TJ from my cousin as a little project and it turned out to be a big project not as big as JJ but more than I anticipated so when I found you on KZfaq it was a huge help!

@ForceBuilt 8 ай бұрын

Thanks a lot! Glad I was able to help!

@jonirish323 8 ай бұрын

Great job Steve! You make it look it easy ;-) If you are looking for a video idea, how about painting the calipers? I want to paint mine flame red to match the rest of my Jeep.

@jonirish323 8 ай бұрын

Maybe powder coat them?

@ForceBuilt 8 ай бұрын

I may just do that. I didn't realize how bad they looked until l reviewed the video lol. Thanks for watching!

@user-pe8ng9jb2i 8 ай бұрын

This is Dan from Arkansas I have two Jeeps 97 and 01 have you ever had any trouble with your gauges on your dash thank you I like your videos

@ForceBuilt 7 ай бұрын

The only trouble I had was some of my bulbs wouldn't work. I solder a jumper wire and get them working. What trouble are you having? I will help if I can.

@user-pe8ng9jb2i 7 ай бұрын

@@ForceBuilt got it going it was some wires come loose underneath the dash thank you sir very much