No video
VW Golf MK7 R Maxton Design Side skirt Fitting
Рет қаралды 51,244
Күн бұрынFitting Maxton Design side skirt extensions to my mk7 golf R. Ive had these for about a year just never quite got round to fitting them. it didn't take long, maybe 20-30mins. Added some 3M style tape as well as the screws for added security. the side skirts are available from the link below
www.maxtondesi...
@nufcjak86 3 жыл бұрын
Very helpful, sticking mine one me next day off. Definitely going to use the dbl sided rather than glue now nice one 👍
@AkashBhambra 4 жыл бұрын
Thanks for the tutorial! Looks great
@1BlueGhost 4 жыл бұрын
Thanks!!
@AkashBhambra 4 жыл бұрын
1Blue Ghost for the front splitter, did you have to take the bumper off for fitting? Or was it drilled straight up into the bumper?
@1BlueGhost 4 жыл бұрын
AkashBhambra yes I took the front bumper off to fit the splitter. Made it much easier.
@fuhrerpolizei86 4 жыл бұрын
Do u run any spacers on this? 18" rims?
@1BlueGhost 4 жыл бұрын
19’s no spacers
@Holliana8647 Жыл бұрын
Well you guys made that look easy. Think I struggled coz was using the impact driver at a slight angle. Did you not feel you needed to cut a place in the skirts for the jacking point?
@1BlueGhost Жыл бұрын
From what I remember no we didn’t cut anything, I sold the car a few years ago now. It was definitely easy on the ramp, and also not the first or last time we have fitted maxton items to a car I guess
@Holliana8647 Жыл бұрын
@@1BlueGhost cool thanks 🙏
@andrewbaxter6432 3 жыл бұрын
Looking good 👍
@1BlueGhost 3 жыл бұрын
Thanks 👍
@olivermarcjanssen3161 4 ай бұрын
i like, looks very well good
@1BlueGhost 4 ай бұрын
Yes it was great
@CsabiA7X 2 жыл бұрын
What about rust ? Wont be start rusting near screws ?
@1BlueGhost 2 жыл бұрын
It screws into the plastic side skirt
@tenaki8 4 жыл бұрын
Does the side skirt stick out abit at the rear, just installed mine and i was wondering if this is normal ?
@1BlueGhost 4 жыл бұрын
Yes they stick out more at the rear than the front
@tenaki8 4 жыл бұрын
1Blue Ghost phew that’s a relief, thanks for the quick reply 🙌🏽👍🏽🙂
@seanscanlan5480 3 жыл бұрын
Is the pouch of bacci standard for these setups or would I need to buy a custom bracket for it?
@1BlueGhost 3 жыл бұрын
Unsure, I don’t smoke but I guess you could make a cool bracket for it 😂
@xDoyle514 3 жыл бұрын
Cheers
@slavenmilic8027 4 жыл бұрын
Aren't you afraid of rust when you make holes through metal?
@1BlueGhost 4 жыл бұрын
Slaven Milic I think it just screwed into the plastic
@slavenmilic8027 4 жыл бұрын
@@1BlueGhost I have Skoda Octavia and I think that by Skoda is metal down there.. I want to build my Skirts but I'm afraid what will hapened after few years with the rust
@2425752 3 жыл бұрын
Good point!
@grantweller9300 2 жыл бұрын
Cheers for the vid,what bolts did you use?
@1BlueGhost 2 жыл бұрын
They came with the sideskirts, sort of like self tappers into the plastic
@DJFutureBass 4 жыл бұрын
🙌
@2425752 3 жыл бұрын
I suppose there is nothing that can be hurt where the screws was drilled in
@1BlueGhost 3 жыл бұрын
No, basically just screws to the plastic to add more security to the 3m tape
@samknight6710 3 жыл бұрын
Do they get in the way of the jacking points ?
@1BlueGhost 3 жыл бұрын
No not at all 👍
@eval7952 4 жыл бұрын
They look super light! Are they? Cause I have an MK7 gti w golf r side skirts. I’m afraid since the the skirts aren’t factory assembled that the Maxton diffusers will pull them down, but if the skirts are very light maybe I’ll be ok. Car looks sick!
@1BlueGhost 4 жыл бұрын
yes they are pretty light, ive had no issues with them as yet even driving through puddles they've stayed put.
@eval7952 4 жыл бұрын
1Blue Ghost thanks for answering. I’ll give them a try, I was afraid they will pull down my skirts.
@eval7952 4 жыл бұрын
1Blue Ghost are the skirts made of same material as front diffuser? Sorry to bother.
@1BlueGhost 4 жыл бұрын
@@eval7952 pretty sure they are both listed as being ABS so id imagine so but im not entirely sure.
@jaanussepp4376 Жыл бұрын
screw holes were left unsealed, risk of rust in side boxes
@1BlueGhost Жыл бұрын
It’s plastic. It screws in to plastic. Plastic doesn’t rust 👍
@paullasky6865 2 жыл бұрын
These maxton add ons are just about passable on black and grey cars. On any other colour car it literally looks like the car has been driven through halfords covered in superglue.
@1BlueGhost 2 жыл бұрын
I don’t know I quite liked it when I had it. Thought it looked alright!
@maximilianborek8143 2 жыл бұрын
Hey, how is your rust going on down there?
@1BlueGhost 2 жыл бұрын
They are screwed into plastic so shouldn’t rust? I sold the car about 2 years ago anyway 😂
@maximilianborek8143 2 жыл бұрын
@@1BlueGhost Door sill isn't made of plastic Mate...
@1BlueGhost 2 жыл бұрын
The side skirt is?
@maximilianborek8143 2 жыл бұрын
@@1BlueGhost You attached a plastic side skirt to a door sill made of metal... what is hard to understand here?
@1BlueGhost 2 жыл бұрын
No it’s a plastic side skirt attached to a plastic side skirt
@eddierodriguez2843 4 жыл бұрын
I’ve ordered some different maxton side skirts, looks like yours have some sort of adhesive to help applying it. Mine are telling me to use glue. What glue should I use ?
@1BlueGhost 4 жыл бұрын
I purchased the tape separately, it’s just 3m tape and seems to work well. Mine also suggested glue but decided against using. Some sort of gorilla glue or no more nails type stuff may work.
@Holliana8647 Жыл бұрын
I tried using tiger seal fucking hell what a mess when you take it off
@James.527 10 ай бұрын
@@Holliana8647did you glue them onto the actual car or onto skirts already on the car? Because I haven’t got plastic skirts on the car already so I’m gonna need to drill through metal to attach them but I’m not sure wether to use glue
@Holliana8647 10 ай бұрын
@@James.527 straight on to car, my car didn’t have skirts. Tiger seal alone on side skirts will not be enough, my maxton ones have been on a few months now and that’s just with about 10 self tapping screws in each side straight into the metal underside of the car.
@James.527 10 ай бұрын
@@Holliana8647 okay thanks, I was skeptical of drilling through metal because I don’t want it to rust but I might just go for it lol
@mikedolman1065 2 жыл бұрын
These ain't sideskirts there skirt extenders
@1BlueGhost 2 жыл бұрын
😱😱 they’re sideskirts for the sideskirts 😎
@stephenjones7780 3 жыл бұрын
Do them screws go into the the plastic skirt what's already there or the actual metal sills
@1BlueGhost 3 жыл бұрын
I don’t think they are long enough to go into the metal from what I remember. That’s why we stuck them on as well
Gourl’s Garage
Рет қаралды 17 М.
MajorAutoshop
Рет қаралды 4,8 М.