If you fill the whole plate you can get quite a bit done for a two minute change. Nice!
@1SpudNuts1BigNasty-DIY2 ай бұрын
This was just a test but yes, I’m could file the plate, I could do a lot of items at one with.
@MrWheezyE420Ай бұрын
Great vid! Bambu have lots of documentation but honestly they do a bad job of explaining the simple stuff, like how to pause on a layer by right clicking the slider. I have been wanting to do hueforge prints and now i know how they pause for manual changes.
@hectormuzquiz52775 ай бұрын
Thank you! You have show me how to do it, finally! Good job.
@tamasdebreczeni533510 ай бұрын
Exactly what I need, an example. Thx
@JDDupuy Жыл бұрын
Clearly your friend is a Ham Radio OP. Since 1995 here. Nice video!
@1SpudNuts1BigNasty-DIY Жыл бұрын
Thanks and yes, he is a Ham Radio OP.
@RobDubrasky Жыл бұрын
You don't have to turn the heat up to unload or load. It will heat up automatically.
@1SpudNuts1BigNasty-DIY Жыл бұрын
When I try to unload, I use to get an error. Did they fix that with the latest update? I checked and you’re correct, thanks for the correction.
@owensieber15776 ай бұрын
Great video, as I was watching I saw you had a stand for what appears to be a very old Iphone, probably 6 or 7. Using it for handy. what a great idea. I happen to have an old 6 that will work just fine. Would you be able tp point me in the right direction to get the files to make that cool phone enclosure? thanks again for the great video!
@1SpudNuts1BigNasty-DIY6 ай бұрын
Here’s the link to the mount: makerworld.com/en/models/66386#profileId-69709 But I’ve changed since this video to the XTouch screen. Just Google it, it’s pretty nice.
@capthowdy1266 ай бұрын
where did u get that phone holder on ur p1p, i was getting ready to print one that i found on makerworld but its not near as nice looking as the one u have in the video, would love to try it myself if u have a link or name for the file.
@1SpudNuts1BigNasty-DIY6 ай бұрын
There’s a bunch available, search printables and Thingiverse too.
@bebo6750 Жыл бұрын
So, on the P1P can i use my iPhone or my Ipad as a second big screen for the printer? The screen was something that I was thinking about to buy the X1 (I dont like P1P small screen), but now, im thinking about to get the P1P
@1SpudNuts1BigNasty-DIY Жыл бұрын
The app doesn’t support iPad but I’m using an iPhone.
@3dthailandhappy3d-thailand46 Жыл бұрын
The app downloaded onto my ipad mini 2 ok. I have not used it on a printer yet though.
@1SpudNuts1BigNasty-DIY Жыл бұрын
@@3dthailandhappy3d-thailand46 Maybe they now have an iPad app. I’ll have to look. Thanks
@adrianthrockmorton7557 Жыл бұрын
Do you have a spare phone used as a color touch screen??! That’s so cool
@1SpudNuts1BigNasty-DIY Жыл бұрын
Yes and the USB port keeps it charged.
@grantbatten Жыл бұрын
I am able to swap filament, but when I click on resume, nothing ever happens, just sits there, so I cut the power off, then back on, and resume print, and it works......ughhhhhhh
@wrxsubaru02 Жыл бұрын
Yeah, but how do you manually color swap for objects that is not on its own layer? I have an inset part that needs to be color and it is surrounded by a different color which is at the same layer hights for 1mm in total. I cant seem to find how to do this manually.
@1SpudNuts1BigNasty-DIY Жыл бұрын
That is very difficult and time consuming. You would have to pause in the slicer at every color change to do that. I would suggest getting an AMS for that.
@sparkydoodles4440 Жыл бұрын
I have the ps1 with an ams but I am using it completely offline. Can I do what you did without the phone app using just the printers display interface? Thanks great video!
@1SpudNuts1BigNasty-DIY Жыл бұрын
Yes, the unload and load functions are available through the display.
@Eric_In_SF Жыл бұрын
Lucky You! I tried to do the same thing and it took a total dump on me. After I unloaded the filament it just kept telling me to verify the filament is unloaded but there were no options on the screen or in studio. Desperately trying everything to save the print nothing would work no matter what it just said the printer is busy every button press. Finally after about 45 minutes of trying I just said the f*** with it. And then of course trying to cancel the print is another nonsense. This was such an easy procedure with a prusa.
@Eric_In_SF Жыл бұрын
Now I'm seeing people having success with the handy app. I really feel I don't need three devices to control my f****** printer. It should all be able to be done through the printer. Not the printer and a combination of going to my computer and then getting my phone. 13 days left to decide if I want to keep this p1p.
@1SpudNuts1BigNasty-DIY Жыл бұрын
@@Eric_In_SF You don’t have to use any app, you can do it all through the printer. Sorry you’re having this issue, I’ve not had any problems.
@aguilao28 Жыл бұрын
@@1SpudNuts1BigNasty-DIY I just trying change filament but it already change the options noe it show option "Jump to Layer" so I try to pause and change from the printer and it said "Unable, Printer busy"
@moswald14 Жыл бұрын
I'm having a lot of trouble swapping the filament during a pause in the gcode. every time I do it I have mixed results and no success.
@moswald14 Жыл бұрын
I havent tried through the handy app yet though
@1SpudNuts1BigNasty-DIY Жыл бұрын
Yes, the app does make it much easier when doing the load and unload feature.
@moswald14 Жыл бұрын
@@1SpudNuts1BigNasty-DIY was trying it through the load/unload options in the settings and I was getting weird inconsistent results. it would say it cant, machine is busy, but then it would heat up to 250, purge, then go down to 142 and hang, requiring me to cancel the print. I got it to swap filament once with the load/unload options and the nozzle went back down to 190 but when it went back to print, it didn't extrude anything.
@1SpudNuts1BigNasty-DIY Жыл бұрын
@@moswald14 What you do is click “unload”, it then moves the hotend to the back while it heats up. It then moves to the front and then back and that’s when you grab the filament and pull while it unloads. To load, click load and then it does the same thing but you need to push in the new filiment until it stops before clicking “load”. Then when the hotend move back to the poop chute, you give the filament a little push for an inch or so and the extruder should grab it. Then wait for the app to come up with a pop up to retry or done, click retry until you see the new color coming out and then click done. It should push some more, cut and empty the poop chute and you’re ready to print.
@moswald14 Жыл бұрын
@@1SpudNuts1BigNasty-DIY that's what I did and it would say something like "cannot perform task, printer busy" I forgot, but it would do the purge anyway and hang. I got success finally by manually retracting and purging the filament. you can manually press the cutting arm before you retract for a nice cut end
@ramonjimenez6275 Жыл бұрын
Mi got an error everytime i try to do this
@1SpudNuts1BigNasty-DIY Жыл бұрын
You should get a pop up that ask to retry or done. You keep hitting retry 3 times to ensure the new filament is grabbed by the extruder and then you click done. Once it’s completed you close the pop up and then resume printing.
@knownchild Жыл бұрын
Mine layer shifts when i do this
@1SpudNuts1BigNasty-DIY Жыл бұрын
If yours is a P1P, I opened a ticket with Bambu Lab and they think it’s a firmware issue that should be fixed with the next release. I’m also seeing a layer shift now with any filament change.
@Edramon53 Жыл бұрын
@@1SpudNuts1BigNasty-DIYIs changing filament mid print working now/still? I’ve only had my P1P a few days, got some more colours ordered and looking forward to trying this. I’ve agreed to print something for a friend, they’re expecting single colour. If I can have it switch it’ll blow their mind.
@1SpudNuts1BigNasty-DIY Жыл бұрын
@@Edramon53 works great but only doing it this way (changing completely at a layer). Trying multi color throughout a layer would be horrible because of all the pausing. I’d get an AMS if you plan on that. I’m getting one for sure.
@Edramon53 Жыл бұрын
@@1SpudNuts1BigNasty-DIY Cheers, will just be putting text on top of the print (originally hoped to do a logo, but the logo was too complex for OnShape). I decided to make a cut out in the model, so I can print the insert in a separate colour from the model, then use this technique to put the text on. OnShape is what I know best, but since the insert is such a small and simple part I might see if another cad program can handle the logo graphic better.