1W Namimno ELRS 2.4GHz OLED Flash TX Module With FrSky QX7 X9D Plus ExpressLRS
Рет қаралды 10,544
2 жыл бұрынGet Namimno ELRS 2.4GHz 1W OLED Flash TX V2 Module:
www.aliexpress.com/item/10050...
Backpack feature
Introduce: github.com/ExpressLRS/Backpack
Test video: • ExpressLRS Backpack Fe...
@deezskeezy 8 ай бұрын
I used latest edge tx and its fantastic.
@siempre2ruedas Ай бұрын
Saludos ya con la versión más nueva del open tx es necesario hacer el mod?? Exactamente video 👍👍
@lequangtrung2741 Жыл бұрын
hello friend, I have 01 QX7 controller and 01 ELRS Namino module, but when many modules enter TX, I don't know how to customize the function in the module, can you help me?
@DaveNorthWest 6 ай бұрын
Has anyone got ELRS Backpack to flash onto one of these? I've tried a couple times now and then but when going into the backpack Lua script on my TX16S it doesn't work and there's also no version number showing up. Anyone else have this problem? Thanks
@lecimykrecimy8778 2 жыл бұрын
Hello. thanks for the video. Is there any qx7 accst modification needed such as Crossfire Mod? What is your max band setting (115K or400K)
@col4229 2 жыл бұрын
No modification is required, we recommend to set 115k on the QX7 ACCST.
@lecimykrecimy8778 2 жыл бұрын
@@col4229 very thnx
@bennidian690 2 жыл бұрын
what version of open tx so I can use namimno Elrs on qx7
@col4229 2 жыл бұрын
V2.3.14
@strangerdangerous 2 жыл бұрын
Hi I received mine today, what is the supplied small voltage regulator for?
@col4229 2 жыл бұрын
Improve some older radio by modding the JR Bay's telemetry port to allow 400kbaud throughput speed instead of just 100kbaud.
@holmesteadready 2 жыл бұрын
@@col4229 Im having trouble with my unit. I have the TX16S, and I cant get it to connect, always says " connecting ". I've checked connections, all appear ok, CRSF protocol selected. When powered up, I cant find it WiFi listed either. Is it normal to not see its WiFi?? Is my module faulty ?
@holmesteadready 2 жыл бұрын
Update - my issue was a mismatching LUA script, this OLED version requires the later luaV2 which I finally figured out.
@pablomoreno1242 2 жыл бұрын
My rx came with a solid green light, And I can’t seem to bind or flash the rx through the betaflight passthrough method. Any suggestions?
@jonathancombs9510 Жыл бұрын
@@col4229 if i have the old QX7 will i have to do this mod??
@zubairch9384 2 жыл бұрын
Would this work with x9d plus 2019 And which files i have to download for bind with my emax buzz Thanku
@col4229 2 жыл бұрын
Yes, you can use this module with X9DP 2019, just download the "elrsV2" script file and run it in the system. Link: www.expresslrs.org/2.0/quick-start/lua-howto/
@saahbs 2 жыл бұрын
Which expresslrs build should one use with this module?
@col4229 2 жыл бұрын
You can use the ELRS software to download the latest firmware. www.expresslrs.org/2.0
@dantanase 10 ай бұрын
Would this work with x9d plus older than 2019
@BentRim 5 ай бұрын
Here wondering same thing?
@federicoamigo 2 ай бұрын
Same question here...
@FabrizioOmarini 2 жыл бұрын
would it work with the QX7 access?
@col4229 2 жыл бұрын
Yes, compatible
@aquasport3078 2 жыл бұрын
Will this module work with QX7 Access?
@col4229 2 жыл бұрын
Yes, it can work with QX7 ACCESS
@siogana 2 жыл бұрын
Fan install in the modul?
@col4229 2 жыл бұрын
Yes, the fan has been installed by default, so you don’t need to install the fan anymore.
@siogana 2 жыл бұрын
What is your opentx version
@col4229 2 жыл бұрын
2.3.14
HAZI TECH
Рет қаралды 8 М.
Jason Derulo
Рет қаралды 70 МЛН
CurryKitten
Рет қаралды 8 М.
FrSky RC Live Tech Support - Ben S.
Рет қаралды 244