yo creo para el cambio de 11para el piñon de 12, tiene que ser la cadena una poco mas larga, creo un eslabone a la cadena haciendo el control den piñon de 11, tiene para que este la cadena mas serca del cambio, si se hace es configuacion el cambio no estara muy estirando
@EstebanAl6 жыл бұрын
Nice advice about the chain. Right now I'm having issues with my shimano chain, I would to test your advice thanks
@thanosspeedy23216 жыл бұрын
welkome Esteban. But not forget to clean the chain with white spirit and refresh with new oil after a dirt or mud ride.
@danilofossardi63394 жыл бұрын
Hello, thanks for your valuable suggestion ... I would like to ask you a question .... I mounted on my Cube hard tail born with 1X10 transmission, a SunRace 11 speed cassette with single crown and Shimano XT 8000 SGS gearbox .... I have the problem that falls on the chain on the large sprocket of 50 if you pedal backwards ... it is also a bit noisy ... I used the Shimano CN -HG601 chain .... what do you recommend to improve my transmission? Thank you in advance for your support
@thanosspeedy23214 жыл бұрын
Hi Danilo. 3 solution 1.try Garbaruk Rear Derailleur Cage 50 euro 2.unfortunately the sun race have that problem i had the same. Try Garbaruk Cassette 200 euro 3.If your crank have bcd bolts you can ad spacers 2mm-3mm on chainring bolts to brink it closer to chainstay 10 euros. i hope the best for you in this time on the planet and if you need more info write me again. thankyou
@javimartinbajista19246 жыл бұрын
Hello Thanos from Spain, thanks for your video. I have the same problem of noises and inaccurate changes. I have installed garbaruk 11-50, XT M8000 rear derailleur with the garbaruk cage. With the shimano chain CN-HG900-11 that you propose to solve my problem? greetings and thanks
@thanosspeedy23216 жыл бұрын
Hi Javi. I think is a part of the solution the chain for the noises. The problem is the angle of Derailleur Hanger. This cassette need the hanger to be a little bend to work right .Go to 7:45 time in video to see what to do. Try to bend the hanger in different angles when rotate the chain and hear where the noises disappear. When you find the point where there are no noise bend the hanger to this direction with Allen Key . IMPORTANT if you don't have remove the grease from the chain clean it very well with white spirit and refresh with new chain oil. And you must give some time to a new chain to make some miles because when is new is to tight . if you need more help ask me , thank you for watching .
@Cptblogh5 жыл бұрын
Hey man, I have the last brand new XTR RD-M9100 rear derailleur (it says 45T max cog size). I want to upgrade to this cassette from Gabaruk 11-50 or 11-48 (even 46). I have a 26" Ghost AMR Lector (full suspension 120mm front and rear). You think I would have issues with this one? Or should I go for the longer cage... I can still swap it. But then since I have a 26" the ground clearance will be worse as I understand with a longer cage. Thanks! regards
@fastbicyclerider73003 жыл бұрын
Artur G u need a gabaruk cage
@JJaguar3334 жыл бұрын
Hi. Do you use the cage with the 11-50? I have the medium cage xtr and am getting the 11-50.
@thanosspeedy23214 жыл бұрын
hi JJ. Yes i have change the cage with Garbaruk and the shifting now is perfect
@merttt1923 Жыл бұрын
I have noise like rattling on highest gears especially. You had the same problem after install?
@thanosspeedy2321 Жыл бұрын
hi Mert. that you have depend from how long or sort is your Chain ( is expensive but is the best chain the XTR model to avoid the noise ) - from b- tension screw on your Derailleur - if you don't have yet long cage on Derailleur buy Garbaruk long cage. If you don't have all that adjust with the Q-factor of crankset is logical to have rattling on highest gears . Thank you.
@marvindiaz64996 жыл бұрын
I used the sram pc x1 before I watched this video and shifting is not good now matter how much you adjust. Gonna give shimano chain a shot. Seems like 900 cost more than the 901
@thanosspeedy23216 жыл бұрын
hi Marvin. Is almost the same cost around 30-37euros, but 900 is older model and is difficult to find
@marvindiaz64996 жыл бұрын
My set up is xtr derailleur, Xt shifter and sram xx1 crank and chainring. So I put on the 900 chain and the shifting was noticeably better than the 901 but not a big difference. My shifting was great after putting on the Garbaruk cage. For me without the cage the shifting was horrible! I hope someone finds this useful.
@thanosspeedy23216 жыл бұрын
Hi Marvin. you are right about the cage but i don't use it because is to long and is very easy to break and bend the derailleur especially in the paths. If you give a little time to chain to work some kilometers you see more difference.
@celo6865 жыл бұрын
Hi.Changing gear looks nice,but it happens to me that the chain is skip over the smallest 11 teeth when I hit it very hard either flat or uphill
@thanosspeedy23215 жыл бұрын
hi Dragan.. Depends from how long or sort is your Chain - from b- tension screw on your Derailleur - from the Derailleur if it have clutch to keep the chain tight. If you don't have all that adjust right and your Derailleur does not have clutch is very easy your chain to skip cogs.And if you don't have yet long cage on Derailleur buy Garbaruk long cage and your shifting will be match better. thank you for your support and if you need more help ask me.
@theclash326 жыл бұрын
is this available in SRAM XD hub?? and where is this Made (the Garbaruk))?
@thanosspeedy23216 жыл бұрын
hi Ruel. yes it is available.go to r2-bike.com or Garbaruk.com. the Garbaruk is made from Ukraine
@teddytoro83435 жыл бұрын
Hi Thanos, greetings from Ecuador. Have you tried with the 10-50 / xd .? I just got one and i dont know which chain will be the best?. Maybe the Eagle chain because have the same range of 10-50 but this one its made for 12speeds or should i catch some other 11 speed chain? and how many links will be fine to paired with a 34th chainring in front?. Sorry for bother you, but nobody has Grabaruk experience around here. Thanks and Cheers!
@thanosspeedy23214 жыл бұрын
HI Teddy. I'm sorry for delay to answer to you. I have not try with XD hub. the shimano chain CN-HG900-11 speed work perfect for me in cube and canyon. Now the links depends from your chainstay. My rule is when the chain is on 10 or 11 cog the Derailleur Cage must have 1.5 - 2cm space from chain or upper pulley.
@pelman70926 жыл бұрын
φιλάράκι καλησπέρα. θέλω να πάρω κι εγώ garbaruk κασέτα και να την βάλω με την xx1 σειρά που έχω (μάλλον την 10-50 που έβγαλε τώρα για xd hub) και ήθελα να σε ρωτήσω γιατί δεν έβαλες το tuned cage για το σασμάν της shimano που έχεις .. ήθελα να σε ρωτήσω από το προηγούμενο βίντεο που έκανες με την 11-48Τ αλλά επειδή κι εγώ έχω την sunrace 11-46Τ τώρα στο δικό μου σκέφτηκα ότι δεν έχει μεγάλη διαφορά και μάλλον γι αυτό δεν το έβαλες. Ή μήπως έχει? στο βίντεο τώρα που το βλέπω δεν φαίνεται να έχει κανένα απολύτως θέμα. Βοήθα αδερφέ γιατί δεν ξέρω αν είναι να παρω το tuned cage για sram μαζί με την κασέτα!! Ευχαριστώ!
@thanosspeedy23216 жыл бұрын
Γεια σου pelman.Να σε βοηθησω αλλα δεν ξερω για sram .Το ρισκαρα χωρις tuned cage κ ' αφου ηταν οκ δεν πηρα. Μπορεις να δοκιμασεις το σασμαν σου χωρις tuned cage κ' αν δεις αν στο 50 το πανο ροδακι του σασμαν εχει τουλαχιστον 1-1.5 ποντους κενο αποσταση με το 50.Το ξερω οτι θα πληρωνεις διπλα μεταφορικα αν κ'εχει κ εδω' αντιπροσωπο της garbaruk καπου στην Καλλιθεα αλλα ετσι μονο μπορεις να το γλιτωσεις κ' λεω γλιτωσεις γιατι τα tuned cage ειναι πολυ μακρια κ' βρισκουν ευκολα σε πετρες- αυλακια κ.τ.λ.Επισης μπορεις αν εχεις βιδα προεκτασης στο σασμαν να το ρυθμισεις κ' απο εκει.. Αν μπορω να σε βοηθησω ρωτα με οτι θες. Καλη τυχη.
@condebrutalcb5 жыл бұрын
Hi. Can you tell me which better fo 50t, is it long cage of medium cage rear derailluer?
@thanosspeedy23215 жыл бұрын
hi. the long cage is better for smoother shifting... but with long cage if you ride in narrow paths with rocks is easy to bend it .
@condebrutalcb5 жыл бұрын
I am using mid cage with 11 speed 50t. Is it okey if i am going to put goat link?
@thanosspeedy23215 жыл бұрын
if@@condebrutalcb
@thanosspeedy23215 жыл бұрын
if you have problem with shifting, you can try . Remember the 50 cog from down pulley to have 5-6mm distance.
@condebrutalcb5 жыл бұрын
Yes. I have a problem on shifting. Ok. I will try.
@lucianlucian30246 жыл бұрын
Hello, are you using the cage from garbaruk on 11-48?
@thanosspeedy23216 жыл бұрын
Hi lucian. I'm not use it because is to long and it is very easy to bend the derailleur especially in narrow paths with rocks , works fine with shimano cage, just you gonna have more tension on chain
@lucianlucian30246 жыл бұрын
Hi, i've just instaled the 11-48 cassete with xtr medium cage. I seem to have a problem on the 11t cog, where the chain is very close to the next cog, and from time to time seems like the chain will skeap gear . Also, on 4 to 5 cog, from time to time the chain does not come down, and i have to shift again for the chain to do the job. I'll try to play with the hanger to see if it solves the problem. (i'm using the 901 chain, i did not find the other model).
@thanosspeedy23216 жыл бұрын
Lusian i have the same problem from 28 to24 cog never change i have to skip to 20 only few times change. I thing the first reason is on crankset in what position is on the frame if the bottom bracket is to way in or not , from that depends the right angle to chainstay.But this change from frames to frames . if you have spacers you can ad on crankset ring 1mm-2mm3mm is enough to see if the shifting is better with the spacers ( do not put spacers on bottom bracket)The second reason maybe is on long cage because with that you need longer chain and that means more loose chain better shifting , now this set up with medium cage the chain is a little tight but as i told you the long cage is to close to the ground for that i use medium cage , if you try to bend the hanger try it in different angles and positions,, and the 901 don't worry is ok but give it a little time to work because brand new is to tight as suppose to be . When work and be more loose the shifting wheel be better( DON'T FORGET TO TAKE OFF THE GREASE AND OIL IT AFTER VERY WELL WITH NOT TO SPRAY IT) The chain after a good ride MUST be clean very well again and refresh the oil.Third AND MAJOR reason is this CASSETTE is to NARROW compare to the others. Good luck and if you need more help i'm here. Informe for your changes. 4 to 5 cog ?