#2 Bottle Cutter - Details of free filament production from recycled bottle (PET) for 3D printer

Рет қаралды 142,825

2 жыл бұрын

Hi guys
Today I want to teach you the equipment used in the bottle cutting machine, I put the parts used in the bottle cutting machine in the video, I just forgot the Blade 9mm.
****for receive more information and training on how to make a filament maker Click on the link below
bit.ly/2Y3ZRDz
***
---------------------
link for donate 🥰😊:
/ mr_3dprint
you can donate however you want
------------------------
Please Like & Share. Thanks for subscribe.
-----------------------
The rest of the information is below
Free stl file up to "the first 10 days from the date of release" :
cults3d.com/en/3d-model/tool/...
---------------
Information on choosing the right spacer for the thickness of the bottle:
for Bottle thickness 0,20 mm -- width 10 mm -- Filament diameter 1.7
for Bottle thickness 0,25 mm -- width 09 mm -- Filament diameter 1.7
for Bottle thickness 0,30 mm -- width 08 mm -- Filament diameter 1.7
for Bottle thickness 0,35 mm -- width 07 mm -- Filament diameter 1.7
for Bottle thickness 0,40 mm -- width 06 mm -- Filament diameter 1.7
for Bottle thickness 0,45 mm -- width 05 mm -- Filament diameter 1.7
-----------------------
#1 Multicolor printing :
• #1 Multicolor printing...
#3 Extruder and nozzle
• #3 Extruder and nozzle...
#4 Heat and motion control board
• #4 Heat and motion con...
#5 Gears and traction mechanism
• #5 Gears and traction ...
#6 Heat and motion control with Thermostat W1209 & gearbox motor
h • #6 Heat and motion con...
-----------------------
stl Cute Flexi Lobster:
cults3d.com/en/3d-model/art/c...
------------------
Social Media:
instagram:
/ mr3dprint
----------------------
سلام بچه ها
امروز می خواهم تجهیزات مورد استفاده در دستگاه برش بطری را به شما آموزش دهم ، قطعات مورد استفاده در دستگاه برش بطری را در فیلم قرار دادم ، فقط تیغه 9 میلیمتری را فراموش کردم.
در آخر اگر ویدئو رو دوست داشتید خوشحال میشم برای حمایت از من کانالم رو سابسکرایب کنید و لایک و کامنت بارون کنید اینجا رو :)

Пікірлер: 403

@mazenraslan9416 11 ай бұрын

دخلت على قناتك وربحت إشتراكي. فخور أن شاب عربي مصري يتجاوز شباب من أميركا ودول متقدمة أخرى. الله معاك ويوفقك..

@mr3dp 11 ай бұрын

شكرا لك صديقي العزيز لكني ايراني

@4ce5bf154 2 жыл бұрын

Wow this gives a whole new dimension to 3D printing, filaments are not cheap and there's soo many empty bottles all around here in Korea, someone should make a machine that can do all of this automatically and would sell like crazy.

@Techknowdude 2 жыл бұрын

You inspired me to try to try and reuse my spare parts to make filament. Thank you for the content.

@madeintexas3d442 2 жыл бұрын

This is awesome man. You don't know how much plastic you will be keeping out of landfills. I use too many plastic bottles and too much filament. This is a solution to both. Also this is 100 percent recycling. Here in the US if you send something for recycling half the time it ends up in a landfill. This is real recycling turning the bottles into something new without any chemical processes.

@mr3dp 2 жыл бұрын

Thank you for your energetic comment.

@Nobody-Nowhere 2 жыл бұрын

You dont have a bottle deposit system in US?

@madeintexas3d442 2 жыл бұрын

@@Nobody-Nowhere It depends on the state some states do but others don't.

@saadatalhi8283 Жыл бұрын

@madayt1994 Жыл бұрын

احسنت

@jpsfish5966 2 жыл бұрын

Just wanted to let you know that these videos got me into the hobby. I just got my Voxelab Aquila X2 yesterday and I have already got it up and running. I’m learning how to hook up a raspberry pie, modify the hot end, and extruder. All of these new skills started from your videos. Thank you for sharing. I can’t wait to see the rest of the set up so I can start printing with my own recycled materials!

@mr3dp 2 жыл бұрын

Glad to hear it!

@SmokeyVlogs 2 жыл бұрын

same !

@mazenraslan9416 11 ай бұрын

Thanks for sharing and for your noble end-target in protesis printing. Allah yojazeek khayran. How much the recycled wire diameter should be (mm) to adopt to the 3d printer.

@MaherGaber55.-_. Жыл бұрын

مشاء الله تسلم ايدك وربنا يزيدك يارب

@dsnineteen 2 жыл бұрын

I love that it looks like even the chipboard, bolts etc were salvaged and reused - this is real sustainability!

@mr3dp 2 жыл бұрын

Thank you dear friend, thank you for paying so much attention to everything

@alpscraftshack599 2 жыл бұрын

This is so awesome. We need more people to be creative like you and come up with ways to recycle / repurpose things that would otherwise be going into the landfills. I plan to build your system and start doing this also. Keep up the good work.

@mr3dp 2 жыл бұрын

Glad you liked it!

@jafinch78 2 жыл бұрын

Thanks for the specs on the strip width and bottle thickness compared to filament size. Great info. Keep up the excellent work. Congrats on 10K milestone.

@juanestebanbustosrodriguez1556 2 жыл бұрын

Me encanta, mis respetos para este canal, me encanta mucho este proyecto.

@user-rf3qf7hi9p 2 жыл бұрын

Спасибо за продвижение идеи переработки пластика. А видео Ваши становятся лучше и лучше

@mr3dp 2 жыл бұрын

Спасибо, мой друг

@Declopse 2 жыл бұрын

Thank you for sharing!

@richie4203 2 жыл бұрын

This is a very helpful and environment friendly channel. Thanks for sharing this video, mate

@mr3dp 2 жыл бұрын

Glad it was helpful!

@Shinzouille 2 жыл бұрын

Great Job ! Thanks for the content. Very inspiring and interesting ! I hope you'll share all your work to allow everyone to recycle their old bottles ! (3D Parts, motor ref...)

@mr3dp 2 жыл бұрын

Thank you! Will do!

@HergerTheJoyous Жыл бұрын

You have got talent my friend!

@universidadfreelance7815 2 жыл бұрын

you are the best

@eded2863 2 жыл бұрын

I am Brazilian. man, thank you so much for the content, you are great! It has inspired me to build a machine to recycle the pet bottles where I live are the main waste that ends up on the beach. Thanks again! And congratulations for the channel, I hope it grows a lot! You deserve.

@mr3dp 2 жыл бұрын

That is awesome!

@danilofreitas1112 2 жыл бұрын

Nice job, the print quality looks great.

@mr3dp 2 жыл бұрын

Thanks!

@franciscocataldo9238 Жыл бұрын

Gotta say, your videos inspired me to make ny own filament maker, and it works, im really happy ive seen your channel

@mr3dp Жыл бұрын

Glad to hear it!

@Millachan Жыл бұрын

المصريين اسراااار ، مصر بتطلع علماء وفلاسفة واناس قلما يشوف منهم التاريخ ! رغم كوني جزائرية الا انني أقر ان مصر تستاهل ترجع ام الدنياواقوى دولة فيالعام زي زمان

@MohamedamineKraz 4 ай бұрын

لكنه إيراني 🙂

@dormirerelaxar8974 2 жыл бұрын

COOOOL my friend ! lets go to revolution !!!!

@fatnatahri3835 Жыл бұрын

تستاهل كل الدعم

@sinakhalessi5069 2 жыл бұрын

دمت گرممممم واقعا ادم کار درست....

@mr3dp 2 жыл бұрын

ممنون دوست عزیز

@user-en8zl1cf6g Жыл бұрын

مشاءالله الله يبارك فيك

@charyschen7856 2 жыл бұрын

Looking forward the next videos. Thanks for sharing!

@mr3dp 2 жыл бұрын

Thanks for watching!

@darren990 2 жыл бұрын

nice video around the home stuff not bad

@raziel6665 2 жыл бұрын

Esto es increíble

@anavonborowsky3811 2 жыл бұрын

Amazing!

@pvc988 2 жыл бұрын

I am going to try it.

@user-yf6qe2ul8g 11 ай бұрын

الله يوفقك يارب🎉

@mr3dp 10 ай бұрын

شكرا صديقي العزيز

@joseoctavioovismorales7765 2 жыл бұрын

Dude you are amazing thanks for sharing the Knowledge, I imagine how proud you would be seeing us making our in filament with your design when you shared the instructions to build it. Thanks

@sprockylock391 2 жыл бұрын

100 % agree

@mr3dp 2 жыл бұрын

Thank you for your energetic comment.

@tobitobi5625 2 жыл бұрын

hope there's second part to show .. thnx for sharing amazing job 👏🏻👏🏻

@mr3dp 2 жыл бұрын

Thank you too

@rahmanomar 2 жыл бұрын

Great job bro..keep it up👍🏻👍🏻

@mr3dp 2 жыл бұрын

Thank you for your energetic comment.

@ArqVictorCastedo 2 жыл бұрын

Thank you very much master 🎉

@mr3dp 2 жыл бұрын

You are very welcome

@m.luthfi.alhadi 2 жыл бұрын

great video !

@mr3dp 2 жыл бұрын

Glad you enjoyed it

@user-ri9yd3lf5c 2 жыл бұрын

대박..와우

@arvindh13 2 жыл бұрын

Amazing.

@mr3dp 2 жыл бұрын

Thank you! Cheers!

@hardwareboy5079 2 жыл бұрын

how much the temperature of the hotend for diy filament maker and hotend on 3d printer and can you show us how you modify the hotend diy filament maker and the setting you use for pet on 3d printer sorry so many questions

@mr3dp 2 жыл бұрын

We will talk about it in the next videos

@stoffel89 2 жыл бұрын

Waiting in suspense for your next video. And a video of your spool roller setup with steppermotor and driver would be much appreciated.

@GHILLIESARCADEANDMORE 2 жыл бұрын

Cool

@TheTurmanDreams 2 жыл бұрын

Great !!!!

@user-mv1rm7jx1g Жыл бұрын

مبدع بسم الله ماشاء الله عليك 🤍 اللهم صل على محمد وال محمد 🤍

@akashsaini100 2 жыл бұрын

3d printing and reprep world needed you 10 years ago ... where was you ?

@miked5444 2 жыл бұрын

definitely have enough old printer parts to try this. Also trying to thing of a way to get my old failed prints and support material into a form i use again. I have all the different materials stored seperately.

@mr3dp 2 жыл бұрын

That's a great idea!

@claytonliotti1328 2 жыл бұрын

Very cool have a video explaining more details about the project I'm from Brazil

@mr3dp 2 жыл бұрын

Ok, thank you

@rb5090 2 жыл бұрын

I love this concept. Except from 1 small detail. I dont have a “make the plastic round and ready for the 3D printer” machine! Hope you are gonna share how to build that to. If you do i will start sharing your videos like crazy….. good job so far!!

@mr3dp 2 жыл бұрын

Thanks dear friend, be a little patient, because the time for the full training video was long, it was decided to split the videos, but do not worry, we will discuss it in the next videos

@goustavonana2930 2 жыл бұрын

هذه الفكرة اعادة التدوير اعتقد انها فكرة و احد من فلسطين اعطوا الناس حقها

@everythingtv6675 2 жыл бұрын

تبریک ظرف روغن قنچه هم به درد خورد

@Mr.T_IT_Solution 2 жыл бұрын

Mashallah

@user-js6xg6zw8c Жыл бұрын

ممكن اعرف طريقة عمل سخان الكهربه

@andyfoscue9872 2 жыл бұрын

I would love all the stl or cad files for every thing needed

@mr3dp 2 жыл бұрын

Yes, dear friend, the link of educational videos (video number 1 to 8) is available in the description price of this video.

@sashastal 2 жыл бұрын

Its cool! Man, did you try to heat up the closed bottle with hot air gun instead of blowing it? How do you control thickness stability?

@danekunderhill4812 2 жыл бұрын

Perfect! You are a genius and thanking you:))

@mr3dp 2 жыл бұрын

see this video : kzfaq.info/get/bejne/e5yAnctinbPRiI0.html

@nanoLuka Жыл бұрын

hi @mr3dp, thanks for the great videos! Do you have an estimate how much time does it to process one bottle? Also, how do you put together two bottles, i.e. how do you weld two filaments obtained from two bottles?

@user-yf6qe2ul8g 11 ай бұрын

❤❤❤

@oswaldocastaneda6828 2 жыл бұрын

E visto la mayoría de tus vídeos Me parece muy chévere como as logrado hacer esto Podrías subir un video explicando todos los pasas atrás de cámaras Como el extrusor de filamento ¿Como lo hiciste? Y entre otras cosas. Gracias

@mr3dp 2 жыл бұрын

La política general de este canal es introducir la impresión 3D realizada con filamento libre. ¡No solo entrenando!

@yassineinsta7731 2 жыл бұрын

♻️

@vikass59 Жыл бұрын

Hi, this is wonderful project. Most usefull for the bigginers. Can I know the full details of the electric circuit boards and the specs of it. and also if you give me all the components details, it will be useful for me to develop

@samw931 2 жыл бұрын

کانالت خیلی شیکه و خیلی در سطح کانال های انگلیسی زبان هست.موفق باشی

@mr3dp 2 жыл бұрын

تشکر بابت کامنت پر انرژیت 😉😇😀

@br0k3nilluzion 2 жыл бұрын

Nice video. Looking forward to the Filament winder. See parts of yours are acrylic, have you printed a full setup of it yet?

@mr3dp 2 жыл бұрын

Yes, soon

@ProjetoDeMaker 2 жыл бұрын

This is amazing! 😱 thanks for sharing this knowledge! Can you tell at what temperature this material starts to melt? I wanted to know if I can use it to create parts to assemble another printer... Again, thank you so much!👏👏👏

@mr3dp 2 жыл бұрын

Yes, you can watch the previous and next videos In each negation it is said that they are very important

@OggyShows Жыл бұрын

Noice but how to make filament with the bottom and upper rest

@tinusblaauw4092 2 жыл бұрын

Nice video! Any listing as to what the build materials required are?

@mr3dp 2 жыл бұрын

Be patient, yes soon

@toya6668 Жыл бұрын

من فين نشترى السخان اللى بيسيح بلاستيك

@marbles3662 2 жыл бұрын

خیلی کارتون درسته ، واقعاً تبدیل بطری ها بلااستفاده به فیلامت ایده خیلی خفن و مفیدیه. منم سعی میکنم یکی مثل دستگاه شما بسازم. راستی یه پرینتر سه بعدی ارزون قیمت خرکار هم اگه معرفی کنید ممنون میشم. عالی هم لایک کردم هم سابسکرایب.

@mr3dp 2 жыл бұрын

تشکر دوست عزیز

@randyedwards3244 2 жыл бұрын

Great idea you have, like many it can be improved. Try as I might, I was unable to understand exactly what the"stand for table floor x 4" was. As in I have no clue!! Perhaps others got it but perhaps I'm simply too old to get it, lol! Thanks in advance!

@mr3dp 2 жыл бұрын

It is available in the stl file, the link to which is in the description section (payeh2.stl)

@hussainalaa9607 Жыл бұрын

🙏🙏🙏

@djlastone7436 Жыл бұрын

Vitesse de rotation maximale de moteur ?? Et la vitesse apres l'engrenage ?

@antonmoiseev2419 Жыл бұрын

Господи какая прелесть, из пластиковой бутылки, можно сказать что из бытового мусора, получилась интересная игрушка. Спасибо за видео. Это моя мечта купить 3D принтер. А теперь с этой войной я даже уже и не знаю....🥺😢😞 денег нет.... Мир вам люди.

@mr3dp Жыл бұрын

Вы можете сделать обучающее видео по работе с 3D принтером, обязательно смотрите мой канал

@mlevif 2 жыл бұрын

I would buy a kit for this if the price was right!

@alideeb7646 Жыл бұрын

ازاي اجيب جهاز الحرارة

@ibrahimmaded3145 7 ай бұрын

ماشاءالله لو سمحت شو سمك الفلمنت الناتج؟

@mr3dp 7 ай бұрын

Ask your questions on Instagram, the link is on the bio page

@SamoesADIY Жыл бұрын

Awesome video, I made a similar one thanks to you and others, but I struggle to spool the finished product, any advice on how you spool and store it? mine unwind the whole time.

@mr3dp Жыл бұрын

Fantastic!

@user-lu6kn3by8k 2 ай бұрын

ممكن مخطت المكينة عشان عايز انفزه

@makewithmegma 2 жыл бұрын

🔥💕👌👍

@djsplunk 2 жыл бұрын

great work!! How many RPM's are you using on the pulling mechanism?

@mr3dp 2 жыл бұрын

Thanks dear friend, be a little patient, because the time for the full training video was long, it was decided to split the videos, but do not worry, we will discuss it in the next videos

@user-no1sk3jt4h Жыл бұрын

طب ازاي نعمل سخان الكهربا دا

@aterxter3437 2 жыл бұрын

Just an idea that popped in my head, to increase the filament's production speed : put a 2mm holed nozzle in the heaterblock, then, the filament will be thicker, theoretically, but by increasing the winding speed, the tension on it at the after the nozzle will increase, lowering the diameter to 1.75mm after tuning. With that system, it would be easier to quickly produce large quantities of filament, and even more with a 2.5 or even 3mm hole, the main point would be that the hole mustn't be to large or the pet won't have enough time to melt and get the correct round shape

@mr3dp 2 жыл бұрын

I do not know, but it is not possible to convert filament 2 to 1.7 with this method

@andyfoscue9872 2 жыл бұрын

It gets harder to control the diameter of the final product

@arnauballesterdeheras4441 2 жыл бұрын

Good morning, it's cool. What is the suitable speed for the winder after extrusion? Thank you

@mr3dp 2 жыл бұрын

Thanks dear friend, be a little patient, because the time for the full video tutorial was long, it was decided to split the videos, but do not worry, we will discuss it in the next videos

@yamiibrs3639 2 жыл бұрын

Amazing tutorial! Has anyone tried to join several pet bands together before the pullextrusion process? I tried to do that welding they with a tin welder but it didn't work, the bands split up when go through the 1.7mm nozzle, apparently the soldering isn't strong enough to resist the pulling, moreover the bands increase the necessary tension force. In a comment I read about welding them with a heat bag sealing machine, but I haven't tried yet

@mr3dp 2 жыл бұрын

That's a great idea!

@fooman2108 2 жыл бұрын

I Love your videos (and have a couple trash bags full of Mt. Dew bottles waiting), one thing I would love a few more details on is the winch you you use to take up the filament after it goes through the nozzle. Could you/will you/ have published the plans for it?

@mr3dp 2 жыл бұрын

thanks . see video #5

@fooman2108 2 жыл бұрын

@@mr3dp hadn't seen that one YET, I am subscribed must have missed it!

@Jrobam 2 жыл бұрын

Hello! Congratulations for your work there! Which size do you use in the nozzle you extrude with?

@mr3dp 2 жыл бұрын

No matter what nozzle you use, the tip should be drilled with a 1.7or 1.5 drill. We will discuss it in the next videos.

@Jrobam 2 жыл бұрын

@@mr3dp nice! Thanks for the info! That's just I wanted to know, about the drill you used to make the hole bigger

@opus1534 2 жыл бұрын

First

@arturoperez6655 2 жыл бұрын

Can You tell me your config in marlin for extruder? Please

@user-xz5kv6bo1q Жыл бұрын

Как собрать такой ссоздатель нити? При каких настройках вы печатаете таким пластиком?

@joman104 2 жыл бұрын

what type of razor blade did you use? also thanks for the documentation

@mr3dp 2 жыл бұрын

9 mm blade

@ali_khosravi_t 2 жыл бұрын

Hello nice job man Did you make your 3D printer by your self ? If you did that let me know and ill be thank full 🙏🏾❤ keep going man keep going💫

@mr3dp 2 жыл бұрын

Hello dear friend, yes, I made the printer myself and I will post the instructional video on the channel soon.

@Thats_Cool_Jack Жыл бұрын

What's the diameter of the plastic output nozzle you are using?

@ibbnoghere 2 жыл бұрын

Hey! When will your next video gonna come? I'm waiting like crazy for it!

@mr3dp 2 жыл бұрын

Very soon!

@raywintech7217 2 жыл бұрын

زیر نویس انگلیسی بزار..... خیلی بیشتر دیده میشی

@eduardocarvalho8627 2 жыл бұрын

Part 3 plsssss

@mr3dp 2 жыл бұрын

We are recording it and it will be released soon (10000 subscriptions)

@SilverMiraii Жыл бұрын

I really wanna do this, filaments are expensive

@mr3dp Жыл бұрын

Start now, you can

@droneartstudio 2 жыл бұрын

could you share full project ? i mean motors mount, motors and other things to work ?

@mr3dp 2 жыл бұрын

Thanks dear friend, be a little patient, because the time for the full training video was long, it was decided to split the videos, but do not worry, we will discuss it in the next videos

@natecus4926 2 жыл бұрын

I probably have a spare hotend or 2 laying around and a stepper motor and an old control board... this would be an awesome project. I have tried the plastic bottle cutting in the past but I can’t get it to be even, is there any trick to it?

@mr3dp 2 жыл бұрын

Pay attention to the video, those weights (bearings) and direction are very important

@technologeando 2 жыл бұрын

Really interesting! I try to replicate this project and I realized that the filament it's not solid, it's most like a pipe. My question is: the filament that you have made it's completely solid? Thanks for sharing!

@mr3dp 2 жыл бұрын

Glad it was helpful!

@timfalken3886 2 жыл бұрын

From what I can tell, that's the desired effect. It should be a bit wider than 1.75mm too, but because it's hollow it checks out when entering the nozzle and you can still use your regular flow settings.

@technologeando 2 жыл бұрын

@@timfalken3886 your opinion have a lot of logic to me. Thank you very much!

@Josealber1264 2 жыл бұрын

The filament maker, have the design?

@59shahriar 2 жыл бұрын

لطفا بگید چه کیت های الکترونیکی نیاز هست ممنون.

@mr3dp 2 жыл бұрын

بخش کامل آموزش شامل ویدیوی شماره 1 تا 8 هست که لینک اون داخل دیسکریپشن همین ویدیو هست

@jordyv.703 2 жыл бұрын

You could take 2 strings from different bottles to make some interesting filaments

@yourlocaltoad5102 2 жыл бұрын

True, but it’s best to take material from bottles made by the same manufacturer and made in the same colour to prevent having issues from one bottle having other additives in its filament than the other bottle. These bottles aren’t pure PET, but rather a mix of pet and a bunch of additives (like colourants, softeners, etc) and this mix differs in bottles made by different manufacturers, so mixing them might lead to filament that is inconsistent in its printing requirements (like temperature or its properties once it’s printed), so it’s best to always use the same bottles for each batch. But you can try adding pigments (like by using a marker or powdered ones from a painters store) to colour sections of your bottle string and get a bit more colourful filament via that route.

@mr3dp 2 жыл бұрын

Yes it can be done

@mr3dp 2 жыл бұрын

I used many methods to produce the tape, but this method was the easiest and cheapest method that worked well. Of course, after teaching the filament production mechanism, I intend to teach other ways of producing the tape, as well as the cheaper method of this mechanism.

@faucheurairsofteur3929 2 жыл бұрын

bonjour j'ai essayer avec bouteille cela fonctionne mais impossible d'imprimer sa fond pas malgré plusieurs température utilisée ya t'il une bouteille spécifique a utiliser ?

@mr3dp 2 жыл бұрын

PET