Check it Out!
If you work on small engines, chances are you'll come across a Briggs and Stratton Snow Series engine, equipped with either a Walbro, or Nikki carburetor.
These are 2 very different carburetors, and thus feature 2 different mounting designs.
The Nikki Carburetors will have 2 Studs that thread into the engine, which have male Torx T25 ends on them.
To remove these studs properly, you will require an E5 socket. I chose an E5 socket with a 3/8" drive, because that's what size my impact tools are.
As for the Walbro carburetor, it has 2x 10mm headed bolts. However, fitting a socket in that area is next to impossible, and removing them with a wrench is difficult, due to limited space.
To easily remove these bolts, I recommend a T30 extended torx bit, with a 3/8" drive. As a bonus, if you're looking to purchase an extended torx bit, you might as well get the T30H bit, which is a "security" bit, that will allow you to remove special "tamper-proof" screws and bolts.
Additionally, if you work on Stihl chainsaws, I would also recommend a T27H torx bit as well!
_______________________________________________
If you enjoyed the video, hit LIKE & SUBSCRIBE!
New videos every week!
Get up to 3 Months FREE NordVPN with this sign up link; ref.nordvpn.com/VDyPaQedOsk
Lube-Shuttle: www.lube-shuttle.ca/ (Promo Code ELIMINATOR for 5% OFF)
SOCIAL MEDIA:
/ elmn80r
/ eliminatorperformance
/ elmn80r
/ eliminatorperformance
DONATE:
paypal.me/ELMN80R
Bitcoin: 1NYgPvcvBWuhGRewsLE4Scy1cbzwndh5hZ
2ND CHANNEL:
EP Vlogs: / @eliminatorperformance...
GEAR:
Camera: amzn.to/3MqXvUx
Camcorder: amzn.to/3MJqi8n
Tripod: amzn.to/3BMuy0I
Microphone: amzn.to/3Wq4FNp
Cheap Mic: amzn.to/43gcLKN
Old Headphones: amzn.to/45kl6im
New Headphones: amzn.to/3OpK2PD
Headphones for Music: amzn.to/3olPI2t
Editing Software: amzn.to/3OvpR2W
Photoshop: amzn.to/3OxgS1a
MUSIC:
Intro/Outro Music: Burnt - Jingle Punks