2 ways to drill door cylinder lock.

Рет қаралды 499,301

4 жыл бұрын

Only attack or unlock door, that you own or for which you have the explicit permission by the owner.
How to drill the door cylinder lock, when lost the keys to the house. You need to get a drillmachina, drill with a diameter of 6 mm. It's good to have a punch, a hammer and a piece of metal. The door lock company can also drill the door insert. It will be much cheaper to do it yourself. Buying a new insert for 15 $. You can ream the insert in the door on the property you own. Remember that if you have rented a property to someone else, you must not drill the insert without a court order despite being the owner. I invite you to a movie about how I opened the closed door.

Пікірлер: 109

@tomwright5130 2 жыл бұрын

Thanks for this incredible video. I've been locked out of my house for weeks

@Nauman.Speaks 2 жыл бұрын

🤔

@youubik 2 жыл бұрын

Lucky FreezerSIG posted this video or you would have been locked out for the rest of your life

@tonymeman9041 Жыл бұрын

Wow what battery do you have on your phone lol

@zaidenkuzainer Жыл бұрын

"my house"

@elijah7173 Жыл бұрын

@@zaidenkuzainer ahahha

@jpustiu 3 жыл бұрын

Man! You are the best! Thank you

@MarsrecoveryteamBlogspot 8 ай бұрын

I humbly thank you, kind sir! Worked perfectly. I must note I went for the keyhole itself with a larger drill bit at first.The lower second drill finished the job with whatever pieces were left, so there was nothing to pull out.

@dolevbenichai3564 2 жыл бұрын

Thanks my brother , you just saved my weekend!!!

@Right_Stuffsc 3 жыл бұрын

Hay man ! thank you very much for sharing this idea. bedroom door locked and keys weren't available. this idea works. i have done on my own.

@khaldoon1983 5 ай бұрын

Wonderfull, i did it myself and it was a piece of cake. I finally succeeded to change my room cylinder. Thank you

@sandraracko615 2 жыл бұрын

I'm really grateful for this video, helped a lot

@HaseebKhan-kx7js 2 жыл бұрын

I just opened my stuck lock like this. It worked out really well. Thanks for sharing

@jonijo5038 2 жыл бұрын

Thanks breather! i like it

@jinaval 2 жыл бұрын

This is good. I tried this one.

@szilu2002 10 ай бұрын

Works, I used a battery powered drill, but because of the lock size I have used a smaller heads, you need though a small tool to pull out the springs. The safety goggles are also a must

@yvesaltana5732 2 жыл бұрын

sick music choice!

@nazninpatel2111 Жыл бұрын

Thanks a lot you saved my day. I would say my house. I was so upset after moving into new property the where no keys for couple of locks. I trick worked😮

@realislamicworld7591 3 жыл бұрын

Interesting video 👍

@user-vm2qu8wz1z 2 жыл бұрын

बहुत शानदार प्रदर्शन

@GreeceballAnimations 9 ай бұрын

Thanks now everyone can found the neighbor's kids on my basement

@archa3547 3 жыл бұрын

Thank you very much man. It helped a lot

@lYODAl 3 жыл бұрын

6 months later my dumbass forgot the keys inside the apartment . Now I’m stuck in the car Lol

@thebossman80s Ай бұрын

What mm drill bit should I use?

@dusanstevic89 2 жыл бұрын

Excellent video

@paulsutton5686 Жыл бұрын

What a brilliant video, very informative. Just bought a new house and the garden gates are locked shut- now I have a solution!

@WesternState731 3 жыл бұрын

Thank you!!!!!

@WesternState731 3 жыл бұрын

I spent ages drilling everything but the wright spot until I watched your cid

@metro7films 2 жыл бұрын

Nice video, gave it a big thumbs up!! (That song sucks though!!) Thanks!! 🤣🤣

@piotrekmawianin2222 Жыл бұрын

Fajny kanał bardzo przydatny pozdrawiam

@cuteek Жыл бұрын

helpful thanks

@sarmachannel5907 Жыл бұрын

Very good

@bti4232 2 жыл бұрын

i got a problem that the key got stuck while twisting and is not completely inside the key and i can't pull out, just the lock is not completely unlock the locker and just the key is a little bit pull out, but got stuck, i don't know if i explain well hope to get some info

@chrisgoodwill3818 Жыл бұрын

Do I need to use bigger and bigger drill bits or all one size from start to finish please?

@techalyzer Жыл бұрын

I tried it but there's some kind of anti-drill feature, I can see and feel a spring-loaded claw looking thing at the end of the keyhole. All the pins are definitely out.

@yeabuca 2 жыл бұрын

Thanks for sharing. Where's the second way tho?

@tonynewcombe9075 3 жыл бұрын

No music pls

@superdave7241 2 жыл бұрын

My thoughts exactly!

@user-vm8nm2iu1t 5 ай бұрын

Hello, where can I buy lock cylinder marbles?

@SamoScopom 3 жыл бұрын

Is there a way to determine how deep the lock is if I don't have the original key? Can I use a toothpick to just feel where the keyhole ends? Is there a risk of drilling too far?

@matej9255 Жыл бұрын

good question, i would like to know that as well !

@mattl2k6 Жыл бұрын

@@matej9255 Just don't go further than 35mm and you should be fine with all euro cylinders.

@MegaHorse7 Жыл бұрын

what about an anti snap lock, if you have one fitted its the same routine but will take about 3 hours each side. nothing on you tube about this.

@graemepetersherwood7960 3 жыл бұрын

Does this work on uk locks

@FreezerSIG 3 жыл бұрын

Show the photo UK locks

@nicholassanchez7613 Жыл бұрын

What's that tool that was used to indent the cylinder prior to drilling?

@balfie18 Жыл бұрын

It's call a nail punch. That one looks like a spring loaded one.

@Siziusmopul 3 жыл бұрын

And then how do you remove the drilled/broken cylinder lock to be replaced? I can't get it out

@FreezerSIG 3 жыл бұрын

kzfaq.info/get/bejne/abCBpplju7aWfoE.html

@anthonyabbott6925 Жыл бұрын

Have drilled many pin tumblers and find it better to drill just a mm over the sheer line.tumblers fall out.gentle tap on core with hammer and screwdriver.much quicker in my opinion.anyone disagree?

@alistairmurdoch4035 3 жыл бұрын

What's the small tool called that you use to put inside the lock & get it to open ?

@jaybonkersbonkers3613 3 жыл бұрын

A key

@SamoScopom 3 жыл бұрын

He used a lock pick, because he needed a deeper thin tool - the screwdriver didn't go deep enough.

@vodiak 2 жыл бұрын

@@SamoScopom Looks like a broken key extractor. But probably a pick would work too.

@temo1551 3 жыл бұрын

second way?

@JVerschueren 3 жыл бұрын

Two different locks. Notice, on the one door, spinning the face of the lock did nothing and he had to insert something into the lock to get the lock body to turn and release the catch. On the other door he could turn the lock body by jamming a screwdriver into the face of the lock.

@benwebster7221 3 жыл бұрын

what sizes drill bits are required for this method I have a 6.5 ,would this do? and would a 8 mm sized drill bit work also or would this be too big of a hole to drill? ,also what sized screwdriver or whatever it is are you using to scrape out the pins from the drill hole under the plug?

@Tomatenkopf88 3 жыл бұрын

6.5 mm works fine 8 mm could be a little bit to big You just need any tool to get rid of the pins and the springs And you need a tool to turn the core when finished drilling ( screwdriver works good ) Count the pins you are drilling ( most locks have 5 pins, some have 6) When you drill too far and drill into the cam you can spin the plug but nothing happens

@benwebster7221 3 жыл бұрын

@@Tomatenkopf88 Thankyou for this 👍

@robul4416 3 жыл бұрын

@@Tomatenkopf88 "9

@Tomatenkopf88 3 жыл бұрын

@S R yeah try drilling the first pins and pick the last ones Ich it doesnt work you could still drill out all pins Whats the name of the lock?

@Pwr2ThePeople Жыл бұрын

Call a Locksmith, have them open it without a drill

@mountainsonthemind5795 3 жыл бұрын

Thieves must be loving this video

@james2091991 3 жыл бұрын

Bankers don't need to pick locks, they just put politicians in place to make certain laws and loopholes 🤷‍♂️

@TheLockLab 3 жыл бұрын

Thieves tend to snap this type of lock, easier a lot quieter 👍🏻

@mountainsonthemind5795 3 жыл бұрын

@@TheLockLab still showing them though 😂

@a.d4496 2 жыл бұрын

I'm on my 7th pin and the door still wont open :(

@FreezerSIG 2 жыл бұрын

All pins 14 pieces and 7 springs fell out? Does the drum rotate?

@Graeme758 3 жыл бұрын

wtf is that music for?

@superdave7241 2 жыл бұрын

My thoughts exactly!

@michaelgibson4705 2 жыл бұрын

All my tools are inside the house 😂

@thechumpsbeendumped.7797 2 жыл бұрын

How do you get past the hardened anti drill pins?

@Qaz375 Жыл бұрын

Drill down the crack above where he drill his hole and then slowly elongate the whole downwards then you can pick the locking pins out

@petermcintyreA1 Жыл бұрын

My girlfriend locked herself out and called a company that appeared first on her online search. I just wished I thought of looking on KZfaq to see these great videos and save her hundreds of pounds. The individual arrived within 15 minutes in his Mercedes Benz, drilled out the Euro lock, replacing it with similar and charged her £514.80; all in 10 minutes! She's still getting over the shock of being so gullible.

@applesid239 Жыл бұрын

probarbly called a 0800 number national call center , who deploy locksmths in the area they take 60% while the person who does the job gets 40% max, not a good idea to use national call centers who are prominent in google searches for any trade

@petermcintyreA1 Жыл бұрын

@@applesid239 online searching can be precarious nowadays, making us vulnerable at the best of times. I faught for some reduction on the price, pestering them constantly until someone at the company acknowledged my pleas, and gave a £110 refund, which helped slightly. Thanks......

@AUSSIETAIPAN Жыл бұрын

Why do you have to hit it at the beginning? Can't you just drill?

@roblonsdale8927 Ай бұрын

He used a centre punch so that the drill started in the desired location

@frenchgreguk 2 жыл бұрын

Why didn't you snap it?

@Chief_iq 2 жыл бұрын

That a hard way

@nikolajockov6932 3 ай бұрын

Malo je glupo meriti dužinu burgije za bušenje cilindra spram ključa, zar ne ? Pa, da imam ključ ne bi mi trebalo to bušenje već bih ključem otključao bravu.

@bigkuntry5115 3 жыл бұрын

Could have gone without fn music

@superdave7241 2 жыл бұрын

My thoughts exactly!

@gbsthlm6174 3 жыл бұрын

Why the annoying music `?

@superdave7241 2 жыл бұрын

My thoughts exactly!

@bruceybrew Жыл бұрын

Just mute if it’s that annoying to you

@ivanilsequeira4598 Жыл бұрын

I drilled it and it will rotate but not unlock

@FreezerSIG Жыл бұрын

Insert the plate where the key was inserted, the slot must be vertical. After switching the insert, just turn.

@daniel244 2 жыл бұрын

if you are a locksmith please dont do this

@FreezerSIG 2 жыл бұрын

why?

@daniel244 2 жыл бұрын

@@FreezerSIG because thats dirty work,good locksmiths could pick simple euro locks like this

@rikhughes6452 2 жыл бұрын

I'm not a locksmith but iv done it twice thanks

@superdave7241 2 жыл бұрын

Even though the pictures were easy enough to understand what you were doing, I would much rather hear what you're doing and why you're doing it instead of that obnoxious music, I had to turn the volume down the whole time

@JohnDoe-ij7et 3 жыл бұрын

Why do people both with all these pilot holes and drilling in other spots n getting out screw drivers, u just get a thick drill piece, drill right through the key hole and you’ll hit the bolt, then with ur drill bit u can just flick the bolt backwards

@peter6782 2 жыл бұрын

that bloody music was so annoying

@superdave7241 2 жыл бұрын

My thoughts exactly!

@fireblaster9961 3 жыл бұрын

This type of content of KZfaq is exactly why I charge more once you have attempted to get through the lock yourself and cocked it up usually

@mattygaga2013 2 жыл бұрын

Aww is that because someone is teaching others how to do something that you charge nearly 280% more than your actual working costs, to do? What, you charge say £165 to drill and change a lock, when this video+a new chamber is probably gonna cost you £50 max. Shame. LOL

@rikhughes6452 2 жыл бұрын

Hes helped loads including me twice once for mum and another for a friend your just sad because a normal person can do the job you charge loads for

@spudhead169 2 жыл бұрын

Nah, these guys make most of their money working for scum-bag bailiffs or utility companies forcing entry. Most of the time they destroy the lock without gaining access, especially if I've been asked to secure the doors and locks beforehand. Not one locksmith has been able to pick, drill, snap or bump a lock I've prepared. It's fun watching them try though. The frustration they display when they think they've drilled/picked it and the cylinder still won't turn is so satisfying. And even if they did manage to get through the lock (which none yet have) they still wouldn't be able to open the door as I install wireless dead bolts on the inside that need a key-fob to retract. On PVC doors I install a similar wireless device that prevents the handle from being pushed down so the door can't be opened. One locksmith actually suffered a bad facial injury from a snapping drill bit and the clown actually tried to sue the homeowner for it. My words to him would have been simple, "If you didn't work for scum, it wouldn't have happened".

@MoroccanAnwar 2 жыл бұрын

@@spudhead169 you obviously don't pay utility bills or rent. Scrounger lol. Proper locksmiths pick locks first. Without people like you their wouldn't be bailiffs lol

@spudhead169 2 жыл бұрын

@@MoroccanAnwar "THERE wouldn't be bailiffs." Your wild assumptions are comically inaccurate. But if attacking me makes you feel superior go right ahead and continue, I really don't mind.