I've had my PA 2" BL up in my attic for about 6+ years now for my 2002 BlaZeR2. Your video has inspired me to just fuckin' install the bitch already. ::favorited::

Was thinking of doing this myself using hockey pucks lol. Damn good vid with great details on what needs to come off. After basically dismantling the entire front end of the truck, I changed my mind lol

Nice work on the vid. Some of these idiots think you owe them a detailed play by play. They can go and figure our their own shit, pay someone or screw off. I watched it to see if it was going to be too much or work something I could handle myself. I feel confident I can pull it off now thanks to your vid.

solid video dude. Im about to order the lift and install it on my 2000 jimmy, and then order the rough country suspension lift kit.

@julesb12345 I actually just used Rocker guard/ asphalt undercoat. I taped the lines around the fenders and sanded them, then sprayed them a few times over a month with the spray can. I did the wheel wells, and the frame too. I don't have any after market fender flairs, just the spray. Thanks for the comment!

This is awesome and very helpful. thanks for making this!

well done Peace From Spokane Wa.

Thanks for this video. Live in ON as well, maybe I will see you around.

If you have seen my other video, you will see my install of the 2.5" Rough Country suspension lift. Thanks for the dislike on my helpful video though!

Excellent video... thanks much

I just did a 2 in. performance body parts lift on my 1998 Blazer today and I had to use all 12 body blocks, and I am "pre-2001". Also the fuel neck filler extension step would have been nice to see. But thank you for the insight, I will also be doing a BDS 2.5 inch suspension lift early next week, and appreciate that video also. What tires went on yours? I will be putting 33's on my stock 15in rims.

@jrobb913 The bolts thread into the body itself, thanks for watching!

I think it's a good walk through just saying underside could use a little Bedliner or coating

@SuperRetroTech I assume it would be a simple clip system as well. Try to pull the grille a bit and watch down with the hood open.

@Ricky039 Yes, I had the Performance Accessories 2" body lift.

What size tires could you clear with just the body lift?

good video, best one on here.

Looks really good

@SuperRetroTech I'm guessing you mean the front bumper? I didn't even install them, bumper is a bit wobbly on the sides, but whatever lol.

@SIRE429 Thanks for the comment, what do you mean 'multiplied the rear axle?"

I'd say it would be identical!

Same kit, mine is a 2" body lift

Great explanation! Very much appreciated! I'm wondering if I should buy the kit or build one. Is there any parts I most definitely cannot fabricate myself? Also, perfect opportunity while you had all that off toclean the rust and undercoat it. . . . Then again, that's why I'm so slow. I'd easily turn this 2 day job into 6 😅

Aveneged Sevenfold playing in a Blazer...nice

lmao now its time to have a funking smoke.

Currently have 2 1/2 " lift, and plan on doing a 2 inch body lift, did you have to relocate the 4x4 actuator under the battery?

video was helpful, but where did you put your jacks to lift the body? also, from what it looks like this would be almost the exact same, if not fewer steps for a 2wd

So you used the hi lift jack to lift the body off the frame? Where did you put it so it didn't dent or bend the body?

6:25 your dirofram was sucked in mine that means your 4wheel is engaged should be a spring that pushes it out when the truck is eather out of 4wheel or vehicle is off

What size tires could you fit with the 2 inches?

Do I need to get a steering column extension and fuel line extension?

like the vid. think I'm looking at the same kit at jc whitney...says its a 2 or 3" kit..same company though " Performance Accessories "....looking at doing on my 1996 s10 blazer 4 dr 4x4...was yours the same 2 or 3" body lift ?

I could tell you were Canadian right away, the license plate and smokes just confirmed it. LOL shout out from Winnipeg (go jets go) Great vid, loved how "fuck" pops in there a few times.haha Thinking of doing this to my zr2. Vid is very helpful, Thanks

I'm doing this to my blazer kinda stumped when I get to my rear right wheel weld my bolts don't line up with the holes from the body (shell) there tilting to the left is that normal? Did you have that problem? kinda freaked out lol

how long did it take abouts? Im thinking about doing mine saturday but i have to work sunday morning.... i will have 2 experienced guys along with me doing it with a heated garage with hoist and all the tools well ever need

do the bolts that came with the body lift bolt into nuts or do they bolt into the body itself?

how does it ride now is it more tippy im getting a blazer and want to fit 31s under it.

question where did you get the black rocker panel trim and fender flares?

How did you use the hi lift jack to lift the body were did you lift it from?

how difficult was it to loosen the body mount bolts up... I live in new York and my shits rusted to fuck on my 01 and I tried to loosen one and it didn't budge. not trying to snap them off.

How much would you say it would cost to do this to my 2002 blazer and put bigger tires on with a 2-6in lift

anyone who has alot of car know how knows you do not need to remove alot of that stuff the instructions tell you to

Will this be basically the same process on a 2003 s10 zr5 ?

About to do this to my 05. What was the part that took you the longest? Like why did it take two days? Not shit talking, actually curious.

I've been thinking about doing the 2" body on my 2000 jimmy. Did you do anything to the steering column?

Great vid... But I betcha those 1/2 and 5/16 fasteners you did would be better using a 13 and 7mm instead... Just sayin'

at 9:45 why take off the licence plate when its attached to the bumper

Will this be the same on a 98 tahoe 2 door?

ik ur a chevy guy but a 98 ranger would be simular?

if its the older "Blazer" Trailblazer, identical, if its the newer ones, I haven't a clue, I don't know anything about them unfortionatly

Hey dude where did u buy the kit man

What size are your tires

Anyone know where I can get new cab mounts? Mine seem to be rotted in the front hahaha

why is you 4wheel engaged

Hrm..I'm actually not sure on that one. Good observation though!

Where do you see that?

Where did you get the body lift and how much is it ??

@patmatte haha thanks man!

Was that one day?

I did it 2 inch rear shackle lift on my blazer and crank the torsion bars to match, my 31s fit just fine with plenty of clearance. So with a 2 inch body lift you think I can fit 33s just fine? Thanks...

Kira² beak sabaraha duit eta mang biayana mun hayang kos kitu?

I think its a mixture of road salts and dried up mud lol

what rims are thise look like the ines on summit racung i wanna get they are like 89 dollars each

Dou you need change the shocks?

where did you get the wheels?

it would be the same for a 99-01

почему задний бампер не показал как вышло?

A7X

Underside looks like hell

How was this bad for instructions? I followed step by step? lol

It's pretty good for a 12yr old truck. Show me your underside

The underside of your blazer looks terrible

Eh. Kinda good video, bad for instruction though. If you are going to do a mod. Do it right

Weak!!! Body lift suck. They make blazers look like shit with all that frame showing plus there rear bumper gap. Please people break down and get a suspension lift!!

You can help me!! Please