changing the heater core in a 2001 Nissan Frontier DIY Easy Fast smooth as silk!
Пікірлер: 51
@trebochet Жыл бұрын
After watching your video I’m going to have a better time doing it. thanks bro!
@user-no8wm3fi1g2 ай бұрын
Thanks for the video. I just did the job. Would like to add that its best to slightly screw the top 2 screws into the heater core before sliding it back in. Then slide the black tube into those open face holes and put a bottom screw in. Then tighten them. Also anyone doing the jib should order the core with gasket included.
@ChristmanGarage2 ай бұрын
Awesome! Thanks for the comment
@redbay8527 Жыл бұрын
Great video, and thanks for calling out the socket size.
@danielescobar76188 ай бұрын
Hi christman! Was doing a knock sensor job and broke the old plastic tube off. Thanks for the save
@ChristmanGarage8 ай бұрын
Awesome!👍
@reneeseaton3889 Жыл бұрын
Thank you for posting! Need to get to working on mine!
@ChristmanGarage Жыл бұрын
Thanks for the comment👍
@dwphillips4210 ай бұрын
thank you for making this video. im getting ready to change my heater core in my old frontier. I always like to know if there's going to be any surprises.
@ChristmanGarage10 ай бұрын
Glad I could help
@chief59819 ай бұрын
@@ChristmanGarageI e been putting mine off for several years but you just made this a breeze. My a/c is going out intermittently as well. Should probably consider replacing the compressor while I’m at it? (I’m assuming it’s the compressor)
@sidneycarpentero54292 ай бұрын
Thank you for your help this video is very helpful..
@ChristmanGarage2 ай бұрын
Glad it was helpful!
@Chez-747 ай бұрын
Excellent thanks for showing this. I have the same problem on my d22 Navara 2003 2.5d.
@ChristmanGarage7 ай бұрын
Great to hear!👍
@chief59819 ай бұрын
Awesome man. Thank you so much for this.
@ChristmanGarage9 ай бұрын
Happy to help!
@joseanvazquez9653 Жыл бұрын
Good job i learn so much and i can do it and save Money thanks bro
@ImJhark_ Жыл бұрын
Dang my heater hoses in engine bay broke because how old they are might give this a try tho
@nils4137 Жыл бұрын
Is this the same for a Pathfinder of similar age? VQ 3.5L engine...
@ChristmanGarage Жыл бұрын
Highly likely if the dash is designed the same
@DavidHernandez-ue4fz Жыл бұрын
Did you replace it?
@BudStudmuffin Жыл бұрын
Evacuate the A/C? You said this was easy DIY
@ChristmanGarage Жыл бұрын
Yeah that’s the worst part but not bad at least you don’t have to tear the entire dash apart👍
@alecb8509 Жыл бұрын
Before i had my recovery machine, i went to a shop that did all my ac charging. I would bring a car to them, they would vac it down for me. I would do the repairs and then bring it back to recharge the a.c.. They would only charge me for a standard a.c. charge.
@jorgecabrera96677 ай бұрын
Is it the same for a 2000 frontier??
@Chan70815 Жыл бұрын
Thank You plenty
@drock555519 ай бұрын
Are 2015 frontiers the same?
@johnstrickland253011 ай бұрын
thank you sir.
@whamo1966 Жыл бұрын
What brand heater core did you use? I understand that most aftermarket cores are too thick on the tank ends to install this way.
@ChristmanGarage Жыл бұрын
yes you are correct some of them are too large on the ends, I get most my heater cores from O’Reillys and they sell “Murray heater cores” the Murray one was a perfect fit👍
@whamo1966 Жыл бұрын
@@ChristmanGarage thanks, just completed this job on a 2002 pathfinder with the 3.5 liter. I used the Frontier “Murray” core from Oreillys. The pathfinder core has fixed aluminum tubes that don’t allow replacement without removal of the entire dash. By cutting those off, using the Frontier style core and replacement plastic style tubes I was able to replace with removing the entire dash. It does require massaging the heater hoses.
@ChristmanGarage Жыл бұрын
@@whamo1966 thanks that’s good to know👍
@DavidHernandez-ue4fz Жыл бұрын
@@whamo1966 You meant you removed the entire dash,or NO removed the entre dash,I have same vehicle as you and I was thinkin to replace heater core,thanks
@whamo1966 Жыл бұрын
@@DavidHernandez-ue4fz I did not remove the dash but I had to cut the old heater core tubes off to remove it. I installed the Murray Frontier core with new outlets. The heater hoses and the firewall grommet don’t fit that great but it works. FYI, you need the heater outlets (tubes), seals, and screws.
@randonprochnow3125 Жыл бұрын
Any idea if a '98 Pathfinder would be similar?
@ChristmanGarage Жыл бұрын
If the dash looks the same on the outside it is highly likely
@user-nz4im8jg2s6 ай бұрын
En donde lo en cuentro
@Ffffffjjjjjj9555 Жыл бұрын
It's a lot of work, how much do you charge to do a job like this, thanks, good video
@HitMarkGod8 ай бұрын
Would this be the same for an 02 xterra?
@ChristmanGarage8 ай бұрын
I’m not sure but if the dash looks the same on the outside it should be👍
@SCfanIam100 Жыл бұрын
Any chance this procedure is the same for a 2017 Frontier?
@ChristmanGarage Жыл бұрын
I doubt it I did a newer model a few years back and I had to remove entire dash😥
@juandiegoflores2486 Жыл бұрын
Entire dash
@dnadnadna7439 ай бұрын
1994 nissan hb stock 5 speed will trade for fronteir
@danielescobar76188 ай бұрын
1984 king cab 5 SPD, will not trade for anything.
@dnadnadna7438 ай бұрын
I guess your clutch doesnt rattle on each gear change@@danielescobar7618