I wonder if "cut the lights on" relates back to the old "knife switches"?
@familyguy5081Күн бұрын
Ridiculous, I have a 2015 Sienna FWD and had to actually remove the carrier and cut the axle to get this thing to come out. On the driver side, I bought aftermarket and wouldn't you know they gave me an axle for a 2004 Sienna and while I was sitting there beating the heck out of it, it dawned on me to take it back out and compare it to make sure it was the same exact fit. had to exchange it lol and now i'm all set.
@ToughShiftGarage2 күн бұрын
Subscribed!!! Btw😂
@ToughShiftGarage2 күн бұрын
Awesome video. My sisters 300 is doing the same thing. I changed the plugs(dirty as hell and orginal to the 9 years old car 😂) qnd it seemed to improve but still cranked a lot before starting. I never heard of starter drag. I thought it was a crank no start situation and looked at ignition and fuel etc. but this is a new one to me. I see a starter replacement in my future. Should i get it tested at autozone before buying?
@ballershanelle2 күн бұрын
I know this is old but i want to buy a water pump and new fan assembly and it ask. Is it super cool or regular? How do i know? Evidently the openong or where the hose attachrs is larger for one than the other..can one tell if its still on the truck?
@user-jn5if6fe1c2 күн бұрын
I pinpoint where this piece is from, from the top cover, the tab that holds it has broken off.
@vikkleo3 күн бұрын
Awesome how to video thanks
@bryansmith73603 күн бұрын
Mines a 97. This is the only time I've had such a good view of the spark plugs on that side. They've always been an enigma. Between my hands and the plenum i couldn't see a thing.
@Squashstompedit5 күн бұрын
Great video dawg. Perfect explanation
@kingoftrolls197 күн бұрын
Hawk tuah
@westhavenor95138 күн бұрын
I had to watch this video with English subtitles lol
@briangerth589310 күн бұрын
dumb ways to die ...
@jesserobinson432012 күн бұрын
I bumped mine with my damn elbow, and now i gotta now I got a weekend project.
@WilliamMunny-d8s12 күн бұрын
I THINK THERES A RULE; if you make more than 1 reference to someone elses stuff, you need to plug or wear their merch ;-)
@ChristmanGarage12 күн бұрын
I think your right👍😂
@FieldClosed14 күн бұрын
No reciever drier replacement? I have one to replace mine but I can't find any information on them
@JeromeSnyder-e5k14 күн бұрын
Awesome!! worked like a charm less than 10 minutes! Thank you so much.
@ChristmanGarage13 күн бұрын
Awesome!👍
@CADuniversity14 күн бұрын
thnk you!
@ChristmanGarage14 күн бұрын
You're welcome!
@pat9870815 күн бұрын
Thanks a bunch.
@ChristmanGarage14 күн бұрын
You're welcome!
@djm622215 күн бұрын
Thank you so much that is exactly what is wrong with mine. I'll let you know
@ChristmanGarage15 күн бұрын
Awesome👍👍
@Al_W_On_The_Trackz17 күн бұрын
You guys are hiLarious! 😂😂😂 I need some of that strawberry grease for my window. Can I use PB Blaster?
@ChristmanGarage16 күн бұрын
😂😂
@almir-lq9qw17 күн бұрын
Intake manifold issue and the tik issue from failed rocker sound so similar.
@joshstanz994318 күн бұрын
Awesome video! Us DIY guys appreciate it very much. Any chance you have the part number still for those parts?
@ChristmanGarage18 күн бұрын
I don’t have the numbers however I get 90% of my parts from O’Reillys and they are normally right on spot I do know that the kit I got was a felpro kit👍
@joshstanz994318 күн бұрын
@@ChristmanGarage thank you!
@kaplanjc23 күн бұрын
Thank you for your detailed video. Best one I saw to help me diagnose and replace my starter. Subscribed
@ChristmanGarage22 күн бұрын
Awesome, thank you!👍
@painterlife199223 күн бұрын
Do u got to unhook battery cables to do this?
@ChristmanGarage23 күн бұрын
Yes battery should be unhooked first👍
@joshuacountryman250124 күн бұрын
No new snap ring ?
@sergioadame553224 күн бұрын
good video friend, is it possible to change the inner booth without removing the entire axel? thank you.
@ChristmanGarage24 күн бұрын
Nope if you want to change a boot the axle has to be removed
@darkrainaldo391126 күн бұрын
Hey man I just installed a level kit on my 2004 single cab Silverado but my shocks will no line up with the hole because the pressure the spring has I watched ur video on how to install the kit any suggestions?
@ChristmanGarage25 күн бұрын
Yeah I’m pretty sure I had to extend the shocks on that job, if you have access to a welder you can make some extensions pretty quick and easy, maybe this helps👍 good luck
@hot-headedloosewire687826 күн бұрын
How long can I keep driving the vehicle with this issue (crankshaft sensor) would it messed up some parts of the vehicle if I don't fixed it right away?
@ChristmanGarage26 күн бұрын
This car went into “limp mode” and would barely go I wouldn’t recommend driving it too much as it may put you on the side of the road
@dl0204528 күн бұрын
I cracked up when they came back to video after orifice tube removed he looked like he needed a moment 😂 thanks for making this video!
@ChristmanGarage28 күн бұрын
😂😂😅😅
@Dragrof1-bs4tk28 күн бұрын
How long would it take an amateur to do this?
@ChristmanGarage28 күн бұрын
Probably an 8 hour day
@jamesstevenson3116Ай бұрын
Also, dont forget to unhook the battery first :D
@alfig5368Ай бұрын
You make it look easy. Good video. 👍
@jorgegonzales878Ай бұрын
What year did those rims came from?
@WillieBendicioАй бұрын
Was the intake gasket blown
@ThommyDeeАй бұрын
@ChristmanGarage - dude! Echoing those that have come before me in sharing THANKS for this video! My 2009 Sedona had the identical issues. I went a different path and ordered a OEM gear knob off Amazon and swapped it out in <3 minutes. Viola! Problem fixed - saving me GOBS of money for diagnostic + repairs. Thank you!!!
@ChristmanGarageАй бұрын
Very cool!👍
@pablocruz74Ай бұрын
You know I’ve never had an issue doing brakes in the 90s but after i got my 15 Silverado i was like wtf is this 💩😂 but after watching your video im ready to conquer that job
@spectrex1972Ай бұрын
I've been suspecting this was where the problem existed on my Kia for some time. Guess this confirms it. Time to fix it. Thanks for the video.
@ChristmanGarageАй бұрын
👍
@EnriqueJuarez-gf5stАй бұрын
This helped me alot thank you sir
@ChristmanGarageАй бұрын
Glad it helped
@andyoviatt7836Ай бұрын
Miracle! Same problem, same solution. Thanks!
@ChristmanGarageАй бұрын
Great!
@richardworks481Ай бұрын
Dang son ,you made it look easy
@ChristmanGarageАй бұрын
👍
@ct7625Ай бұрын
So the wiper module can be opened up and repaired. Wipers on my 1999 MGM only work in high speed so when I move to low speed or intermittent I am removing power and wipers park anywhere.I Need them to work in low and intermittent to park properly. Multifunction resistance within specs on all speeds. Washer works but does not activate the wipers. So module or wiper motor?
@ChristmanGarageАй бұрын
Without looking at a schematic I would guess the module , however I have seen a bad motor not park properly
@mattmonte2171Ай бұрын
Yeah that really is unbelievable that you did that with a John Deere Gator a piece of s*** you could have doubled that distance with a Honda
@sidneycarpentero5429Ай бұрын
Thank you for your help this video is very helpful..
@ChristmanGarageАй бұрын
Glad it was helpful!
@ToyodaMaster-tq6htАй бұрын
Hey brother, the four pin socket for that preload ring is W1272 at your local Oreilly store. The torque on that ring is 205 ft. lbs. (Yes I’ve got by using the punch & hammer too. But preload is important for longevity of that Bearing!). Thanks for the sockets and Rotor spacing tip! Two treated 4”x6” blocks 11” long stood on edge, with two thin steel plates on top makes your press cradle spacing (taller) deeper also.
@ChristmanGarageАй бұрын
Awesome! Thanks for the tips👍
@jcflores4587Ай бұрын
How do you clean it so clean with out scratching it ? What did you use
@ChristmanGarageАй бұрын
I use an air die grinder or what I call a zizwheel with a 2” screw on pad that’s like a scouring pad.👍
@jonaseddy729Ай бұрын
Hardly any audio
@ChristmanGarageАй бұрын
Yep one of my earlier videos sorry about that
@josephcha1854Ай бұрын
Cadillac converter. From Volkswagen to Cadillac. Lol!!!!
@kylecalhoun581Ай бұрын
Don’t know if I lubricated it right? I sucked it off for 35ish seconds but the car didn’t really give any positive feedback
@ChristmanGarageАй бұрын
😳😬😂
@walterhearon2382Ай бұрын
Saved the day! Same exact thing on my 2014 Kia Sedona.
@ChristmanGarageАй бұрын
Awesome glad to hear!!
@codythompson3323Ай бұрын
How did you get the other bolt out? Swivel socket or what?.....
@ChristmanGarageАй бұрын
I use a short socket with a wobble extension that usually gets on there pretty good