I followed this video step by step and it was very easy to remove the panels. I used kicker Kicker CS Series 150 Watt 6 x 9 Inch and they work great. the magnet is about half inch bigger but the windows cleared perfectly.

Thank you for posting this great tutorial. You made it a lot easier to get this done. The window definitely must be rolled down in order for the door trim to come off easily.

Great tutorial! I was able to remove the door panel completely by lowering the window.

Thank you for posting this, super helpful!

What a great video on how to access the door speakers for a SC430! Simple steps and easy to take out and fix speakers. Thanks for the documentation.

Great video! Very detailed. Thank you. Helped so much.

I am about to do a door speaker in my SC430 and the tip about lowering the window to get the door panel off sounds logical to me.

Reverse engineering at its finest ! Well done! ✌️🇦🇺

Thanks, very helpful 👏

Also, can you add to the comment the tools you use. I’ve honestly never taken the covers off the doors to get to things like the speakers before. Thanks again for the video!

The window down makes it much easier and the clip to remove the window button is actually at the top of the plate vs. middle or bottom so if you push it inside at the top it will ease it to come out or you can damage the clip on the other side.

if you removing a door panel off a car always roll the window down so it does get in the way when disconnecting/connecting the door cables

I fixed my on the right door thx

Thanks!

I replaced the speakers with aftermarket speakers, it was relatively easy and i would not be bothered trying to repair the original speakers.

When I do my door speaker I am going to try to replace it using an adaptor plate I will make. You can also buy adaptor plates on eBay. I would never trust a repaired speaker when the original design was faulty anyway.

Hey question. It seems like you posted a follow-on video that you were unhappy with the foam repair. I’m so conflicted of trying to foam repair or just replace. I guess you are an advocate to replacing the speaker vs attempting the foam repair. Anything else to add before i abandon the foam repair (sorry i can’t respond to your other video as its turned off, adding here).

Can the the speaker cover on the door be taken off to access and fix the speaker without taking the whole door panel off?

What kind of wheels do you have ???

Putting down the window enables the door liner to be easily removed. I replaced my speakers with Kenwood units. You have to trim the inside of the plastic cradle holholanddfing the speaker and the speaker fits. You then have to trim the plastic on the inside of the grille that is on the inside of the door trim. Do all that and you get much superior speakers than the originals and they will last.

Where is 2nd part? 😉

dude, put the window down and the door panel will come off

L