amzn.to/42lB0Xh - RWD 2WD Front Wheel Bearing and Hub Assembly Compatible with 1999-2003 Dodge Durango, 1997-2004 Dodge Dakota 6Lugs Non-ABS
amzn.to/3oLur2r - Dorman 05209 Front Spindle Nut with Plastic Insert - M24-2.0 Compatible with Select Chrysler / Dodge Models
amzn.to/45GnekR - Dorman 951-068 Front Wheel Bearing and Hub Assembly (comes with the axle nut)
amzn.to/3WJrHiM - Ceramic Brake Pads
amzn.to/3N40KTy - Power Stop KOE2139 Autospecialty Front Replacement Brake Kit-OE Brake Rotors & Ceramic Brake Pads
amzn.to/2RGarKE - 3/8" drive Long Handle Flex Head ratchet
amzn.to/3oAHOT3 - Milwaukee M12 FUEL 3/8" High Speed Cordless Ratchet Kit
amzn.to/3qopm0v - Milwaukee 2767-20 M18 FUEL High Torque 1/2" Impact Wrench with Friction Ring
amzn.to/3N3PvKM - Mayhew 60143 12-S Dominator Pry Bar, Straight, 17-Inch OAL
amzn.to/2Vw1jtr - Lisle 24400 Disc Brake Pad Spreader
amzn.to/2XMPPnQ - Brake Caliper Hangers (Made in USA)
amzn.to/3INFrmS - Versachem 26080 Synthetic Caliper Grease - 8 oz. Bottle with Brush
amzn.to/2ToaATf -GEARWRENCH Torque Wrench used in the video
amzn.to/3IS3XDe - EPAuto 1/2-Inch Drive Click Torque Wrench,25-250 ft.-lb.
amzn.to/3WEYdCk - 7pc Brass Wire polishing Brush Wheel & Cup Set brass cup brush with 1/4-Inch Shank 0.13mm true brass wire
amzn.to/3ONVCnY - DEWALT 20V Max Cordless Drill / Driver Kit, Compact, 1/2-Inch (DCD771C2)
Just a quick video showing how I replaced the Front Wheel Bearing Hub Assembly & the front brake pads & Rotors on a 2002 Dodge Dakota SXT Rear Wheel Drive Truck. This is the non 4 wheel abs version. This would be the same for many other years and the same as the Dodge Durango as well.
The little Brake Pad clips or metal hardware springs that came with the brake pads just didn't fit in which is why I left them off. The old pads didn't have them either.
Tools needed:
Small Pry Bar or C-clamp or other Caliper Compression Tool
7mm allen (hex) socket or allen wrench
35mm impact socket and large breaker bar or impact wrench
Torque Wrenches
The torque spec that I found online for the slide pins seemed to range from 18 all the way up to 26, but most people recommended 22 ft. lbs, so that's what I went with on this truck.
The torque spec that I found online for the Axle nut is 185 ft. lbs.
It's important to not re-use the old axle nut.
Thanks for watching!
Please Subscribe!
-Dan the Fix it Man
www.danthefixitman.org
www.amazon.com/shop/danthefixitman
Song used in the video:
''Coast" by Silent Partner
As an Amazon Associate I earn from qualifying purchases.