2004-2009 Toyota Prius Touch Screen Replacement | How To DIY Touchscreen Repair

No video

2004-2009 Toyota Prius Touch Screen Replacement | How To DIY Touchscreen Repair

Рет қаралды 28,887

Жыл бұрын

We are fixing this Prius multi-display touchscreen. We will be removing and replacing the touchscreen digitizer.
😎If this video has been helpful consider supporting us with a cup of coffee! 🙂
www.buymeacoff...
🛒PARTS LIST:
▪️ Touchscreen/Digitizer: amzn.to/44iVCBb
▪️ Double sided tape: amzn.to/44sPmGY
🛒TOOLS NEEDED:
▪️ Screwdriver set: amzn.to/4b6BZ39
▪️ Heat gun: amzn.to/3w36s1K
▪️ Flashlight: amzn.to/48OaGJi
▪️ Pick set: amzn.to/3u9AdNZ
➡️I am part of the Amazon affiliate program and get a small commission when purchases are made through the links provided.
🔺DISCLAIMER
The information provided by Valley Mobile Automotive (“we,” “us” or “our”) on this video is for general informational purposes and entertainment only and does not replace professional advice.
All information is provided in good faith; however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the video.
By working on your own vehicle, you take responsibility for the outcome.
Under no circumstance shall we have any liability to you for any loss or damage of any kind incurred as a result of the use or reliance on any information provided on this channel. Your reliance on any information on the videos on this channel is solely at your own risk.

Пікірлер: 50

@markdutton6973 7 ай бұрын

Before you do this simply unplug the thin ribbon from the screen where it goes into the board below it. My screen has not worked in more then a year. I just took it out and started to take the screen off but changed my mind when I saw he had to heat it up to get it off. However I did disconnect the flat ribbon plug from the screen. When I put it back together it WORKS! So it could simply be a bad connection, just re seat the touchscreen ribbon and try it.

@ValleyMobileAutomotive 7 ай бұрын

Hey thanks for the tip! Glad that worked for you 👍

@samuelfisher6743 5 ай бұрын

mvp

@briancclevenger 4 ай бұрын

Nice work on this. Mine is coming out and I have the replacement screen from Amazon on hand. Now watching this how-to helps me understand a little more. Thank you

@dejavudude99 8 ай бұрын

Your video worked perfectly for a 2009 Prius. Extra care should be taken with the screen connection. The connector slides outward and upward to release the ribbon connection. The new connector slips in, the connector snaps down and slides back.

@Palladium104 3 ай бұрын

Thank you for this very useful video. If you don't mind, I add an information for Frenchies (already in english-speaking comments) Pour dé/connecter l'écran, il faut faire glisser le connecteur parallèlement à la carte électronique, vers le haut pour débrancher, vers le bas pour connecter.

@samuelfisher6743 5 ай бұрын

K, took me 3 hours but I figured it out. thanks for the help on this. some notes 1. I probably overheated my screen because it discolored :( That glue is super tough, I think I would have chosen the hottest day of the year and hoped that softened the glue enough next time. 2. my screws on the final guard would NOT come out. I dremeled the sides down to the point that I could get a wrench/pliers on them and twist. 3. speaking of screws, those four screws holding the electronics to the plastic are actually 2 screws on top and 2 bolts on bottom :D 4. don't forget to put the metal frame that goes on top of the other metal frame back on :D and push it ALL the way down so you don't have a big gap between plastic and screen assembly. 5. Wish I had tried the simple unplug/plug trick before trying to remove the screen. In any case I did test removing the entire screen chassis first then plug it all back in and no luck, so it would be very lucky if this simple fix worked for me. In any case, the plastic connector for the ribbon is one that locks in place only when pushed back again, so don't just push the ribbon in, push the plastic connector back and toward the electronics board to lock it in place again

@samuelfisher6743 4 ай бұрын

update - I'm thinking the discoloration is because I bought thew cheapest screen money can buy, and the back screen is fine. Still recommend doing this on a hot day

@skldaddy 12 күн бұрын

what size are the two bolts holding the MFD in plqce? Both fell into the plastic cowling under the radio.

@alalablackbird6476 6 ай бұрын

That was AWESOME! i did it! I missed the part where i need to push this little brown plastic that holds down the screen cable, so i needed to open again cause the touch screen wouldnt work, but i did it again and its sooooo easy i cant believe it.... How about you show us how to change the inner screen next time? You know...the black screen which cracks from the sun and the heat....good job mate!!!

@emilyvanhorn2559 5 ай бұрын

How do you know if you need to replace the MFD or just the glass? Thanks!

@samuelfisher6743 5 ай бұрын

I would say if the mfd still displays correctly, but no touch registers, then its a glass problem. If the mfd itself doesn't turn on, its the screen problem

@emilyvanhorn2559 5 ай бұрын

thank you so much for responding. The display looks fine and touch responds but doesn't correspond to the buttons correctly. Hopefully just the glass?@@samuelfisher6743

@tulipbuttercup 2 ай бұрын

I'm having issues with my digitizer as well, and I got a replacement, but I honestly need a new LCD screen. It's faded really bad, and I don't know where to find one. Any suggestions? It's a 2006 Prius.

@user-uf3hj1hq6p 11 ай бұрын

Hello . Do you know where I can get the protectors for the car seats the same as the ones you show in the video?

@willardcmcd 6 ай бұрын

Would this fix a yellowed screen (sun baked)? Or is that a separate part? Thanks!

@samuelfisher6743 5 ай бұрын

It might, but I'm guessing no, the actually screen is damaged at this point

@daveschannel124 10 ай бұрын

Great Video! Just subbed your channel! BTW your brave to disassemble that unit while still sitting in the car! I would rather do that fine surgical work sitting at my desk where I would not worry about a screw falling down between the seats! Thanks again very detailed and great content!

@C.Chabot 9 ай бұрын

Tried doing this today and I swear they glued the dashboard parts on! Will try again a bit later once I find my plastic tool wedges back

@C.Chabot Ай бұрын

😂 I had the wrong ribbon so here I am replacing with the correct one

@user-uf3hj1hq6p 11 ай бұрын

Hello. Do you know where I can get those car seat protectors?

@finalsealnotaryservices564 4 ай бұрын

👍👍👍👍Thanks!!! My turn soon...😳😳

@khalidmahmood8466 11 ай бұрын

If i can see the screen partially in the daytime and gets better at night time. would the be an issue with just the outer screen replacement or would that be the actual internals of the display?

@samuelfisher6743 5 ай бұрын

that sounds like an internals problem to me

@craigcarlock3617 10 ай бұрын

Our touchscreen is completely non responsive in our 2009. Would this replacement video do the trick you think? If so, where did you get the touchscreen replacement? Thank you for the detailed video.

@ValleyMobileAutomotive 10 ай бұрын

It's possible. There's a link in the description for the screen 👍

@raelphhoughton6554 8 ай бұрын

How did you know screen was problem and not MFD unit?

@ValleyMobileAutomotive 8 ай бұрын

IPO: Input Process Output. The problem can be in any one of these three stages. There's not a lot of testing you can do. I assumed the unit was fine because it turned on the output it thought I was touching. It increased temperature because it thought I was touching that button. That's why I thought it was an input issue, the digitizer was sending the wrong information to the processor. I could have been wrong but the screen was cheap enough to try.

@outdoorsdestinations4293 9 ай бұрын

Thank you

@williammenjivar9751 10 ай бұрын

Where did you order the screen?

@ValleyMobileAutomotive 10 ай бұрын

Check the description. There's a link for the screen 👍

@mikemachi5840 Ай бұрын

I went to repair this today and the small gray cable shown in the screenshot is completely missing.. And not able to find it anywhere.

@mikemachi5840 Ай бұрын

Turns out it still fixed it.. Guess I guess some gen 2 do not have that cable there

@yhwhesmiroeh5693 2 ай бұрын

Do you know if the 2004 screen fits the 2006 ?

@ValleyMobileAutomotive 2 ай бұрын

Good question. I'm not sure. They look the same. If you try it let us know how it goes.

@yhwhesmiroeh5693 2 ай бұрын

I just tried it. The 2006 car got 3 connectors and the 2004 screen uses 4 connections. My 2006 screen got 4 buttons on the front. The 2004 got 7 buttons. On the left is display,info,climate,audio. In the right is menu,dest,map. My 2004 radio got navigation and Bluetooth. I installed the 2004 screen which uses 4 connections into my 2006 which uses 3 connections because no navigation. It's working fine except for the Bluetooth and navigation

@josephhalwagy6435 Жыл бұрын

Thank you for sharing.

@Sagemeister007 7 ай бұрын

Thank you!

@carlosSilvaa19 11 ай бұрын

you are my hero 🙌🏿🙏🏾

@JockeyCake 11 ай бұрын

Great video, thanks

@loicthomas990 9 ай бұрын

Merci pour ta vidéo 👍

@ValleyMobileAutomotive 9 ай бұрын

Je vous en prie

@HipaParts Жыл бұрын

Thanks for sharing the tips. Are you up for a collaboration? We gets some really good quality filters for Toyota,Lexus and maybe we work together to share more tips about vehicle repair.

@wizardmaster6639 6 ай бұрын

I cannot believe you did this in the driver's seat - I would have recommended you take it to the bench - I have 2004 Prius Gen II - WILL THIS WORK PERFECTLY for mine? Mine does not have Navigation - it is the 4 button MDF variety. Thanks