2004 Chrysler Sebring Timing Belt Water Pump Before 90K 2.4 DOHC Denver

Рет қаралды 204,331

11 жыл бұрын

Read our auto repair customers reviews -
www.mastermindofdenver.com/tes...
This video shows why we at Mastermind Enterprises Auto Repair Shop in Denver recommend replacing the timing belt and water pump BEFORE the manufacturer recommend interval of 90,000-105,000 miles. This applies to ALL Chrysler vehicles with the 2.0 and 2.4 DOHC engines such as the Eclipse, Sebring, PT Cruiser, Neon and more!
Thank you for your comments!
~ Mastermind Enterprises
♥High Quality Auto Service & Repair by People Who Care!♥
Mastermind Enterprises is a Master ASE Certified Family Auto Repair Shop in Denver, Colorado. We can provide you with a number of benefits, the most important being integrity. We provide service and quality you can trust in the automotive industry.
Maintaining and repairing your vehicles can be a pleasant experience when you deal with auto repair professionals. We want to make your auto repair experience an enjoyable one. We can recommend a preventive maintenance program that is right for each vehicle your family owns, saving you time and money in the long run.
We offer:
- 10% off New Customer Discount (just mention this youtube video)
- Service you can trust!
- FREE Diagnosis with auto repairs
- The highest quality automotive service and repair at reasonable prices
- Quick turnaround to get you back on the road as soon as possible
- Testimonials from actual customers, click here to read them - www.mastermindofdenver.com/tes...
- A comfortable, kid-friendly waiting room
- 12 months/12,000 miles warranty
CALL NOW!!
303-297-AUTO (2886)
Visit us on the web -
www.mastermindofdenver.com
Visit us today!
Mastermind Enterprises
2091 E 74th Ave Unit C
Denver, CO 80229
For a map, click here -
www.mastermindofdenver.com/#map
Thank you for the opportunity to earn your auto repair business in Denver!
Have a blessed day!
We service the following vehicle makes: Acura, Chevrolet, Chevy, Chrysler, Dodge, Ford, GM, GMC, Honda, Hyundai, Infiniti, Jeep, Kia, Lexus, Lincoln, Mazda, Mercury, Mitsubishi, Nissan, Oldsmobile, Pontiac, Saturn, Subaru, Toyota
Copyright 2012 Mastermind Enterprises Denver, CO

Пікірлер: 55

@alexkramer8115 9 жыл бұрын

Great video. One of the best I've seen.

@MastermindDenver 9 жыл бұрын

Thank you, Alex! Glad you liked it! :)

@MastermindDenver 11 жыл бұрын

Thank you for the compliments! Sorry for the late reply. We are busy working on more videos to put on our channel. I used factory Mitsubishi tools. I believe they are made by OTC.

@StratusCams 11 жыл бұрын

Excellent work. You seem like a very good tech, what did you use to get those cam seals out? The miller SST or just a seal puller?

@kmath50 8 жыл бұрын

Good video. I have had two of these, and the water pumps failed before the recommended change of the timing belt, so I agree that it is better to do it before the recommend change interval, even if it seems fine.

@MastermindDenver 8 жыл бұрын

+Kirk Matheson Thanks for the compliment! Glad you enjoyed the video.

@dennispfeifer7788 9 жыл бұрын

You are an excellent speaker and technician... Very very professional! You should have your own radio program.

@MastermindDenver 9 жыл бұрын

Dennis Pfeifer Thank you for the compliments, Dennis! Glad you liked our video. Blessings to you!

@tacoworstofall4806 8 жыл бұрын

Isn't this a non interference engine? Meaning the pistons cannot touch the valves even though the timing belt is off completely.

@MastermindDenver 8 жыл бұрын

+Taco Worstofall Yes the 2.4 is a non interference engine. However if there are large carbon deposits on the pistons valves can be bent by hitting carbon filled valve recesses. 9 out of 10 times there are no bent valves when the 2.4 belt breaks, this is not the case with the 2.0 it always bends valves.

@Justicejamesb 9 жыл бұрын

Wow, great video thank you!!! You've convinced me not to try it and to just take it to my local mechanic shop. (y)

@johnkb5620 10 жыл бұрын

And this is EXACTLY why engines should NOT RELY belts for internal moving parts, you CAN NOT go wrong with a steel gear and chain setup, I've seen Chevy blocks with hundreds of thousand miles(300k +) and never have a timing chain issue... Chevy Muscle!

@MastermindDenver 10 жыл бұрын

Yes, the simple 2 gears and 1 chain of a OHV SBC are extremely dependable. However, not even Chevy has been able to design a timing chain setup for an OHC engine with the same results. OHV (2 gears/1 chain/No chains or tensioners) OHC (Multiple gears/Multiple chains/Tensioners/Guides, etc.) I have not seen very many DOHC timing chain driven engines that can go over 150K without timing chain replacement or repair.

@MegaViper35 10 жыл бұрын

GREAT VIDEO! Which pump and belt kit did you use? I'm considering the Ebay $65 Gates TCKWP265. Or $103 Gates TCKWP265A. with bracket. Does it always need a new bracket? I've changed several timing belt water pump setups like this. A 2008 Aveo for my brother to name one. I just don't know which kit to use on the 2003 2.4l PT Cruiser Touring car I just bought for only $900 tonight. It only has 79k miles but the belt is broken. Hopefully the valves didn't hit. Compression is good on all cylinders.

@MastermindDenver 9 жыл бұрын

Thank you! We're glad you enjoyed the video. We prefer AISIN timing belt kits. They have proven to us to be reliable time and time again. You don't have to change the bracket most times. Replacing the bracket just makes for a more complete job.

@jeffreysanders8884 9 жыл бұрын

hello mastermind I have a Chrysler Sebring 2003 for some reason I'm losing some coolant what do you think is the problem.

@MastermindDenver 9 жыл бұрын

jeffrey sanders Unfortunately, it could be leaking from one of many different places. The most common places for leaks are the radiator and water pump. We would have to see your car to determine where it is leaking from.

@kwamepoke2289 10 жыл бұрын

my 1998 sebring the other night stalled on me and took a few minutes to start back up and i drove another kilometer and it stalled again then i let it sit for 10 min and i drove it another 10 kilometers and it didnt stall... the next day it wouldnt start at all! it would crack but will not turn over...

@blocklandman229 9 жыл бұрын

my 2006 sebring with the 2.4 is making a whining/whistling sound at idle and low rpms. it has 96,000 miles on it and hasn't had the timing belt done on it yet. could that be the problem?

@MastermindDenver 8 жыл бұрын

+clasota15 Yes a loose belt can hit the cover and make noise, I would have to hear it myself to say for sure.

@newenglandwitchband 8 жыл бұрын

Hello, got a question.... i have a 2003 sebring convertible lxi... i bought last year..and i noticed that the oil light goes on at idle when the car is warmed up after about 10 minutes or so....so i brought it to a mechanic and they did an engine flush,changed the oil sensor,and gave it a new oil change with an oil stabilizer.....didnt have a problem with it all summer last year....it sat for the winter (here in Vermont) and i just recently took it out for the summer again this year, drove it a couple of times and then the oil light started to come back on (when the cars at idle,and warms up) when i drive the car the oil light shuts off!! Weird!! do you have any idea why this is happening? it has about 105,000 miles on it.... and runs awesome!! no knocking or anything!! very quiet car! any idea what i should do??? many thanks ~Doug

@MastermindDenver 8 жыл бұрын

Sounds like you have a bad oil pump or the pressure relief valve (in the oil pump) is stuck open. An actual oil pressure test needs to be performed where a mechanical oil gauge is installed where the pressure sensor goes. This way you will know if the light is being honest with you. If you do actually have low oil pressure, change your oil pump.

@KM-ch1dh 10 жыл бұрын

I have a Mitsubishi 2.4l i4, I'm sure the timing belt is broken as the cam is not turning with the engine when I try to start. Everything I've seen says that, this engine is an interference style. The car was running, but was making a clunk about every other revolution of the engine, I shut it off and let it cool for a bit (temp started climbing slowly too) and when tried to restart it wouldn't. Since it was at idle, and I still had fire/air/comp when engine was running, what are the chances that I have valve/piston damage? I was going to check compression but with the cam not spinning I can't. Thank you for the video!

@MastermindDenver 9 жыл бұрын

Your welcome! The 2.4 is a non-interference engine (technically) unless excessive carbon buildup is present. There is also a very slight chance that valves will hit each other, but it is very rare.

@takeishamiller5104 8 жыл бұрын

I have a question? I have same Chrysler Sebring 2004. 2.4 and before my car died. it was overheating and cutting off. Ive had coolant leaking soons I put in. tried jumps. new alternator. it won't start. what should I do now? any suggestions?

@MastermindDenver 8 жыл бұрын

Get it diagnosed by an ASE certified technician, not just a parts changer. Many so called "mechanics" will just start changing parts until they get lucky. A technician will find the cause of the problem. Once you find the true cause of the problem, you can replace only what's needed.

@alexperales 10 жыл бұрын

i have a sebring 2004 2.4L. my question is. if the timing belt broke's. can be broken the valves too?

@MastermindDenver 10 жыл бұрын

Technically, the 2.4L engine is a non interference motor meaning valves will not hit the pistons unless their have been modifications or excessive carbon buildup on the pistons. However, it is possible for intake and exhaust valves to collide under extreme conditions (i.e. high RPMs, etc.). Most times the 2.4 engine is ok after a timing belt breaks. The 2.0 engine never lives through a broken timing belt.

@alexperales 10 жыл бұрын

Thanks. I'll try to change the triming belt the next week.

@MastermindDenver 10 жыл бұрын

alex perales Your welcome! Anytime. Good luck with changing your timing belt. Hope it all goes well!

@austinpeters2332 9 жыл бұрын

I have a 2010 Sebring with the 3.5 v6 in it. Chrysler says to change the timing belt at 102000 miles. Is the timing belt on the 3.5 reliable or should I worry about it? I currently have 54000 miles on it.

@MastermindDenver 9 жыл бұрын

Austin Peters Personally I would not run that belt past 90K, just to be safe.

@beastinnumber63 8 жыл бұрын

can you give me a short list of everything that has to come off?

@MastermindDenver 8 жыл бұрын

We're working on an instructional video that shows this repair step-by-step. We're very busy in our shop and have little time to work on it, so it will be awhile. We will update this video's page when it's available.

@Seabass2478 9 жыл бұрын

How much would this cost to change if i bring it to the shop?

@MastermindDenver 9 жыл бұрын

Th3p0lic3 The complete timing belt service including all necessary components - your timing belt, idler pulley, timing belt tension assembly w/bracket, water pump, seals and new coolant is $995 parts and labor. This estimate includes all OEM Chrysler parts and a warranty, too. If you mention this youtube video, you get $100 off that price. Thank you for your business!

@andytrujillo8923 9 жыл бұрын

How long should a job like this take?

@MastermindDenver 9 жыл бұрын

Andy Trujillo It depends on your skill level. It takes our Master Tech about 3-4 hours to do this job.

@joshuajames6203 9 жыл бұрын

I had this done to my car and now it shakes my steering wheel on park ND rev. Do u know y this is happening?

@MastermindDenver 8 жыл бұрын

+Joshua James Probably your front right motor mount.

@MastermindDenver 11 жыл бұрын

Sounds like major engine damage has already occurred or possibly blown head gaskets. Without seeing your car, we can't be of any help to you, unfortunately. We offer free diagnosis (up to 1 hr) with repairs done in our shop. Let us know if we can help!

@niteexplorer9934 8 жыл бұрын

how much did that repair cost?

@MastermindDenver 8 жыл бұрын

About $1200.

@johnkb5620 10 жыл бұрын

RELY on belts*

@MrTblackmon 9 жыл бұрын

Does the timing belt for 2004 Chrysler Sebring 2.7L V-6 should be changed at 90k miles too?

@MastermindDenver 9 жыл бұрын

Kool Acclaimed This 2.7L V6 engine has a timing chain, not a belt. Timing chains are only serviced if they are loose or noisy.

@MrTblackmon 9 жыл бұрын

I have another question, Mastermind. If I use Mobil 1 synthetic oil rather than that conventional 5w-30 Havoline oil should I remain changing my motor oil every three months or three thousand miles or can I change it every five thousand miles or every six months, which ever comes first? And do you recommend using synthetic oil on this typical car rather than the basic oil that most people would used? After I have read so many reviews about how bad this notorious 2.7L engine is I have gotten cold feet about basic oil that is capable of producing oil sludge.

@MastermindDenver 9 жыл бұрын

Kool Acclaimed The best thing you can do with that engine is to run high quality conventional oil like Valvoline or Castrol with a BG MOA at each oil change. BG MOA extends the life of your conventional oil to 5,000 miles, but you must use a high quality oil filter to do this. We recommend K&N or Purolator PureOne filter. This is the same oil change service we use for our high performance race motors. If you have sludge in your engine now, you may want to do a BG Engine Flush.

@MrTblackmon 9 жыл бұрын

Mastermind Denver - I have one last question: my air condition (blows out hot air rather than cold air as a normal air condition should) and when I have the air condition or defrost on -- even though my a/c doesn't blow cold air -- the vehicle will squeal and it will have a rough idle up to 4k rpm. With that said, do you think it is the a/c compressor that should be replaced (because I recharged the system with 134-a refrigerant and it still blows hot air) and do you think the idling come from a faulty idle air control valve that should be cleaned or replaced? And thanks for your precised answer pertaining to the oil.

@MastermindDenver 9 жыл бұрын

Kool Acclaimed Your welcome! Happy we could help. Unfortunately, we would have to see your car to help you with your a/c system. As for the idle and the noise, try disconnecting the electrical connector or removing the a/c fuse to see if those problems go away. You probably have a bad a/c compressor.

@StratusCams 11 жыл бұрын

I have to do all this to my 05 Neon 2.4 turbo in a couple weeks. Water pump, cam seals, crank seal, idler, tensioner. Ya its gonna be a blast....... Nope