I'm wondering if anyone else has had difficulty attaching the pressurized hose to the pump during installation. The pressurized hose is stiff and about 5" inches too long. If you install the pump first, you can't line up the banjo bolt to go into the threaded hole squarely. If you install the pressurized hose/banjo bolt first before mounting the pump, you can't get the pump to stay in place while trying to screw the 12mm bolt in above the pump and barely can get it to hook and hang. Any advice is appreciated... I've been at this about 12 hours now because of this.

Great video, this was super helpful! How long did this take you?

What manufacture of pump did you install?

Point fast enough lord.

You talk to much