2005-2008 B7 Audi A4 2.0T Valve Cover Gasket Replacement / How to Remove & Install

Рет қаралды 62,526

3 жыл бұрын

How to remove and replace the Valve Cover Gasket on a 2006 B7 Audi a4 with the 2.0T FSI Engine. Applicable years: 2005, 2006, 2007, 2008 Audi A4 2.0T
//SUPPORT THE CHANNEL
Get CWB Merch and Custom Parts Here: craftyworkshopbuilds.com
Support on Patreon: / craftyworkshopbuilds
//RELATED VIDEOS
B7 Audi A4 Top 10 Common Problems - • 2005-2008 B7 Audi A4 2...
EVAP Purge Valve Replacement - • How to Replace EVAP Pu...
Cam Follower Replacement - • B7 Audi A4 Cam Followe...
//TOOLS AND PARTS USED
Electric Ratchet - amzn.to/3kK3T9Y
Pick Tool - amzn.to/360o6Ey
Screwdrivers - amzn.to/2FRhKNd
Long Needle Nose Pliers - amzn.to/3mUy7cl
T-25 Torx Screwdriver - amzn.to/2HvgcJ7
T-27 Torx Bit Socket - amzn.to/3iZpPh2
T-30 Torx Bit Socket - amzn.to/3iZpPh2
Valve Cover Gasket - bit.ly/43wLmnV
//CAMERA GEAR
○Primary Camera: Sony a6400 - amzn.to/2FYnAwb
○Lens: Sony E 18-55mm f/3.5-5.6 - amzn.to/3cpeN1Y
○Secondary Camera: GoPro HERO8 Black - amzn.to/301z2xV
○Primary Mic: Rode NT-USB-Mini - amzn.to/3x8ydkO
○Secondary Mic: BOYA by-MM1 - amzn.to/3kGS44w
○Light: VILTROX L116T - amzn.to/2RSqkh5
○Tripod: MACTREM CT62 - amzn.to/3i5aJp6
//STAY CONNECTED:
Instagram - / crafty.workshop.builds
Twitter - / craftyworkshopb
Facebook - / craftyworkshopbuilds
DISCLAIMER: Some links included in this description might be affiliate links. If you purchase a product I may receive a tiny commission. There is no additional charge to you! It costs you nothing but helps me big time in keeping these videos coming. Thank you for supporting my channel so I can continue to provide content.

Пікірлер: 211

@Finances1983 2 жыл бұрын

I just had my A4 in for service yesterday. They mentioned I needed a new cover gasket as well and they wanted to charge me close to 700 dollars for the replacement… You just saved me money sir! I really appreciate the quality of this video and how well laid out everything was! You just made a subscriber out of me :)

@CraftyWorkshopBuilds 2 жыл бұрын

I'm happy I was able to help you save $. Thanks for watching and welcome to the crafty family!

@jgray7346 2 жыл бұрын

@BlueManeStudios $700?? That’s insane. I’m grateful for KZfaq videos and internet how-to guides. In the years I have owned my A4 I have replaced the thermostat, coolant flange, cam follower, and resealed the fuel injectors. I hate to think what the dealer would have charged for parts plus $150/hr labor.

@iconoclast281 2 жыл бұрын

Why 700 dollars for a gasket. Did mine for around $ 100. I'd do it myself but I'm still learning

@louisgabrielle2154 2 жыл бұрын

700 dollars for just the valve gasket job seriously? I think that job it's between 250 to most 400. I'm taking a guess. I think they wanted to charge you 700 to replace the whole valve cover that it's around 450 genuine Audi if buy it at ECS tunning. That's still a lot. They probably get an OE replacement Valve cover for 250 and the rest goes to the mechanic. I'm thinking to do the valve gasket job by myself but it seems difficult. Removing the hose and the sequence bolts torque specs seems a little complicated. I would also have to buy a few tools if I want to do it easier and correct.

@wingitreview Жыл бұрын

That's crazy expensive 😢

@colinbrodsky6365 2 жыл бұрын

Fantastic video. Only comment I'd add is that people should check that the valve cover holds pressure blowing from the front one of the multiple PCV ports to the larger clamped hose going to the turbo. There is an internal channel that apparently cracks on many valve covers which leads to all kinds of oil consumption problems. If yours doesn't hold pressure, the fix is to replace the valve cover. I was lucky and no such issues so it was a super straightforward job just like the video shows very clearly - well done!

@MrPresident2001 2 жыл бұрын

Excellent video! Very easy to follow and clearly photographed. Thanks!

@CraftyWorkshopBuilds 2 жыл бұрын

I'm happy you found this video helpful, thanks for watching!

@phantompeeper2092 2 жыл бұрын

This looks like it might be the solution to my leak issue! Thank you so much for the easy to follow video.

@CraftyWorkshopBuilds 2 жыл бұрын

Much respect, I'm happy you were able to fix your leak.

@simontorres450 2 жыл бұрын

Great videos. Clear and concise instructions. Thanks for your help and recommendations for repairs on my B7. You Da Man!

@CraftyWorkshopBuilds 2 жыл бұрын

Much respect I'm happy you're getting value from my content! thanks for watching.

@kaliekmiller5056 2 жыл бұрын

Good and easy follow. I have to do the same on my A4 wagon b7. Great video. Actually not hard at all and shops will always you for that job that so easy. Thank you.

@dannyelpetachen 3 жыл бұрын

You make it look so easy

@raphaelfrancis4509 2 жыл бұрын

Great video! I enjoy working on my B7. Now to fix my oil leak!

@CraftyWorkshopBuilds 2 жыл бұрын

Thanks! Yea, better to fix sooner than later

@a890136 10 ай бұрын

Oh man, this is a quality channel. How come no one is talking about it. Great work!

@CraftyWorkshopBuilds 9 ай бұрын

Much appreciated! thanks for the acknowledgment.

@MrShlee1 2 жыл бұрын

Can’t tell you how great this is! So amazing. I’m going through all your DIY’s and I’ll perform every one of them. I do unfortunately have a parasitic battery drain. Not even Audi can fix it. Very frustrating

@Lmaosmd Жыл бұрын

Checked on ur alternator?

@MrShlee1 Жыл бұрын

@@Lmaosmd hey, actually, it turned out to be the brake pressure switch. All it needed was a new switch and I guess the brake lights were on all night and draining the battery.

@nikosraptis1985 2 жыл бұрын

I like the idea that you didn't use torque ratchet! Thanks for sharing and very good clear to understand video :-)

@CraftyWorkshopBuilds 2 жыл бұрын

Much respect, thanks for watching!

@taylorstrum7711 5 ай бұрын

This was the best mechanical video I’ve ever watched. Thank you so much!!!

@CraftyWorkshopBuilds 5 ай бұрын

Much respect, I'm happy you found this video helpful!

@joeysandoval2716 Жыл бұрын

Thank you, super simple to replace after watching this video

@johnyorchak5162 2 ай бұрын

You’re the best. You make everything look so much simpler than it probably is.

@CraftyWorkshopBuilds 2 ай бұрын

Much respect! Lol

@bryana5026 2 жыл бұрын

Thank you so much!!! I'm not much of a mechanic but I can do this! Save much money!

@CraftyWorkshopBuilds 2 жыл бұрын

I'm happy I was able to help you save! Thanks for watching.

@russellturner872 2 жыл бұрын

Great video. Thanks! You are a great You Tube auto repair presenter!

@CraftyWorkshopBuilds 2 жыл бұрын

Much respect! Thanks for acknowledging my work.

@izzpeso Жыл бұрын

I literally did the work on my own cause of this video.Thanks.

@CraftyWorkshopBuilds Жыл бұрын

I'm happy you got value from this video! Much respect

@317808941 2 жыл бұрын

Really appreciate the video. I was told I may have to replace the actual valve cover as there may be a crack but may start with just a gasket.

@CraftyWorkshopBuilds 2 жыл бұрын

Yea, the gasket is a common failure, due to age or extreme climate conditions.

@LARYNX4OUR5IVE 2 жыл бұрын

I was told the same thing so I'm hoping it is gasket, did you get it fixed?

@317808941 2 жыл бұрын

@@LARYNX4OUR5IVE I did get it fixed and it was not terribly hard to do. I did order the cover that came with the gasket and did the swap. Total DIY.

@CraigMansfield 2 жыл бұрын

I have to do that to my A4 TDI Cabriolet. There was a constant little drip, but that "little drip" was because the oil was coating everything and slowly running down. I noticed puddles of oil in the bolts on the rocker box. So... I'll try this 👍👍

@FrenchConnectie 6 ай бұрын

Thanks for this perfect video! Just bought my wife an A4 B7. The leak is not bad yet but I ordered the gasket anyway. Awesome 💪

@CraftyWorkshopBuilds 6 ай бұрын

I'm happy you found this video helpful, thanks for watching! Enjoy the B7

@FrenchConnectie 6 ай бұрын

I just replaced my gasket. It was so dry that it Broke in pieces. How is that possible? Also my spark plugs are super rusted. How should I replace those? Im afraid to turn them loose.

@juancaballero2510 2 ай бұрын

Excellent presentation. I enjoy how you give us DIYers the confidence to go for it. Thank you, Sir

@CraftyWorkshopBuilds 2 ай бұрын

Much respect! I'm happy you gained the confidence to do it, thanks for watching.

@zeroxthree568 Жыл бұрын

Jump cuts were very much appreciated my man, thanks for this video n savin me some $

@CraftyWorkshopBuilds Жыл бұрын

I'm happy you got value from this video, thanks for watching!

@markespindola6276 2 жыл бұрын

thx for your videos man! now i can deal with the bad mechanics!

@CraftyWorkshopBuilds 2 жыл бұрын

I'm happy you got value from my videos!

@wojtekziolkowski4631 2 жыл бұрын

Great video mate, keep it up! I think I will attempt to do it and If I manage then I will keep my car otherwise it gets scrapped :)

@CraftyWorkshopBuilds 2 жыл бұрын

Thanks! Once you follow the steps you should be good to go.

@ederoliveira86 Жыл бұрын

Excellent video!!! Thanks, bro!!!

@CraftyWorkshopBuilds Жыл бұрын

Much respect and thanks for watching 🙏🏾

@kimpeliz2477 2 жыл бұрын

this was a very clear and good video.

@CraftyWorkshopBuilds 2 жыл бұрын

Much respect, thanks for watching!

@Mister.B. 11 ай бұрын

Bro thank you for such a clean informative video

@CraftyWorkshopBuilds 11 ай бұрын

Much respect and thanks for watching!

@marcoantonio2600 2 жыл бұрын

Excellent video 👌 Thanks!

@CraftyWorkshopBuilds 2 жыл бұрын

Thank you!

@JoseLopez-th9pg 2 жыл бұрын

Very detailed video.. Thank you!

@CraftyWorkshopBuilds 2 жыл бұрын

Much respect and thanks for watching!

@ukaszjakubowski6887 Жыл бұрын

Thanks for saving my money 🎉🎉👌✌️

@Chicagorams 11 ай бұрын

Bro made it look easy, make me wanna change the gasket on my A6.

@AaronyWarony 2 жыл бұрын

Thank you for this video, need to do this on mine ASAP. Don’t feel like getting charged half a leg at the mechanics

@CraftyWorkshopBuilds 2 жыл бұрын

I'm glad I was able to help! Yea, definitely do it yourself and save.

@AaronyWarony 2 жыл бұрын

@@CraftyWorkshopBuilds My gasket was in about 10 pieces upon taking the cover off. Thankfully found the part that fell into the engine as I was taken it off

@CraftyWorkshopBuilds 2 жыл бұрын

@@AaronyWarony Yea, that gasket change was over due.

@AllHelpfulContent Жыл бұрын

Thanks bud was looking around to see if it was worth the job. This was the video i needed to know. 👍

@CraftyWorkshopBuilds Жыл бұрын

I'm happy you found this video helpful!

@last-real-1gh117 9 ай бұрын

@@CraftyWorkshopBuildsget gö long did it take you my friend

@frankyw8803 2 жыл бұрын

Loved it , thanks a lot .

@CraftyWorkshopBuilds 2 жыл бұрын

I'm happy you got value from this, thanks for watching!

@thomasr3363 Жыл бұрын

Was a very good video thank you

@CraftyWorkshopBuilds Жыл бұрын

Thanks for watching!

@wojamojo 2 жыл бұрын

Great video!

@CraftyWorkshopBuilds 2 жыл бұрын

Much respect!

@user-xg5dh2xb4d 10 ай бұрын

Greta video ! Swapping mine out tomorrow on my 06 a4. Is there a specific order when tightening the bolts back down on the valve cover ? And do I need to torque to a certain spec ?

@mauroramirez6896 2 ай бұрын

Brother you inspired me to fix mine

@CraftyWorkshopBuilds 2 ай бұрын

Nice. Yea, fix yours for sure.

@greenwc 2 жыл бұрын

Nice job

@CraftyWorkshopBuilds 2 жыл бұрын

Thank you!

@billybrowning8030 Жыл бұрын

Just bought an 08. Wanted to see how hard of a job it would be and, it's a hell of a lot easier to work on than my infinity g35

@maxheaberlin8013 2 жыл бұрын

This is amazing, I was wondering what was causing all the build up around it on mine

@CraftyWorkshopBuilds 2 жыл бұрын

Yea, these gaskets are known for leaking.

@marcoantonio2600 2 жыл бұрын

@@CraftyWorkshopBuilds have the same problem! I like keeping my engine clean and detailed. This issue was driving me crazy. One question 🙋 why not an OEM Audi gasket… price 🆚 performance?

@CraftyWorkshopBuilds 2 жыл бұрын

@@marcoantonio2600 I've used this brand before and it's pretty good. The price might be cheaper than the OEM but the quality is just as good from my experience.

@lincoln5310 9 ай бұрын

Thank you!

@CraftyWorkshopBuilds 8 ай бұрын

Much respect!

@Cards36555 Жыл бұрын

Awesome 👏

@syeshamotors8950 Жыл бұрын

Very good sir

@zacharyozment460 2 жыл бұрын

Very good 👍

@CraftyWorkshopBuilds 2 жыл бұрын

Much respect👍🏽

@judithwinston2969 Ай бұрын

Excellent, Thanks'

@CraftyWorkshopBuilds Ай бұрын

much respect 💪🏽

@augenblickglobal7086 Жыл бұрын

You are marevlous! Thank you brother. Do you always post videos with audi repair?

@CraftyWorkshopBuilds Жыл бұрын

Much respect! Yea, there is a b7 audi on the channel that I always make content on.

@yannaranjoMaravilla Жыл бұрын

Gracias suscrito

@whatsshaken Жыл бұрын

Would it have been easier to have put the PCV on while the cover was off? Thanks nice video.

@junk301 3 ай бұрын

Hey Great video. I am about to change the gasket on my a3 same year, and looks quite similar. I do have my concerns that you didnt use any sealant on the half moons. How is it holding up over the years?

@petrushall 5 ай бұрын

Awsome clip!! Do you have info about problems with error code P0011 and P000A on the same car?

@cyentifik5836 2 жыл бұрын

Great video! Detailed and concise just the way I like it. I'm gonna attempt on my own A4. Question: Is it necessary/suggested to apply sealant to the gasket and/or mating surfaces? Continue your superb work.

@CraftyWorkshopBuilds 2 жыл бұрын

Much respect! Nah, no need apply any sealant, the new gasket will make the proper seal.

@cyentifik5836 2 жыл бұрын

Yardee?

@CraftyWorkshopBuilds 2 жыл бұрын

@@cyentifik5836 yea, lol

@cyentifik5836 2 жыл бұрын

Big up!! 🇯🇲🇹🇹

@nealtristram7500 5 ай бұрын

Hi i have a question, i did a valve cover swap and a power cooler swap, about a week later it started leaking, i went under the hood and checked then noticed 2 of the screws on the top left werent even tightned , it was my fault for not paying attention, i tightned it and it started driving a bit better but the next day it kept leaking but slowly when i stop the car i notice oil and coolant at the bottom, milky inside the oil cover. Did an oil change drained all liquids , oil was completely black , made no difference. I then opened the gasket tried to dry it and sealed it back with a gasket sealer, worked way better for about 2 days but i can feel it slowly dying again, i have no other issues other than that, any tips ? i plan on getting a new gasket that is completely dry to try that instead of reusing the old one with the seal, it was still a bit oily but i tried my best to dry it,, thank you for your videos.

@mmatloukgwadi8777 2 жыл бұрын

Thanks sir

@CraftyWorkshopBuilds 2 жыл бұрын

Respect!

@luiscamacho06 Жыл бұрын

Is there a secondary valve cover? Under the valve cover is a cam holder or bracket? Does that have a gasket as well?

@rickhempe7804 2 жыл бұрын

Awesome video and explanation!! Thanks so much Just bought an 07 A4 Quattro cabriolet convertible nearly sight unseen and have had some mishaps that can be overcome however at this point still love it!! Bad coil pack led to misfire #4, changed it and noticed oil in the spark plug and led me to you!

@CraftyWorkshopBuilds 2 жыл бұрын

Much respect, I'm happy you found your way here and get the help you needed!

@izzpeso Жыл бұрын

All b7's have the same issues at around the same amount of Miles.I just replaced my valve cover gasket.It was pretty easy thanks to this video.

@G_MOG_44 2 жыл бұрын

Torque specs? Any other “while you’re there” stuff, like testing the coil packs?

@dcgeeked8917 Жыл бұрын

yes

@dnlpark 7 ай бұрын

Would it be a bad idea to use a thin layer of rtv (liquid gasket)?

@knexrule1 2 жыл бұрын

This makes the task look a lot less intimidating - thanks

@CraftyWorkshopBuilds 2 жыл бұрын

Yea, once you follow the steps, you'll be good to go. I'm happy you found this video helpful, Thanks for watching!

@knexrule1 2 жыл бұрын

Did you have to looser/remove the four screws along the back edge of the cover too? Mine has 4 horizontal screws on the firewall side.

@DiscreetNYC Жыл бұрын

Is there anyway to remove the gasket if a bolt has been snapped off?

@kevincampos68 Жыл бұрын

So no torque specs or specific bolts to start tightening down ?

@yosoymichaelmyers 2 жыл бұрын

I need to find a mechanic like you in Orlando 🥺

@CraftyWorkshopBuilds 2 жыл бұрын

Hopefully you find one soon 🙏🏾

@robertseilala9983 6 ай бұрын

The valve cover screws do they they have a torque value?

@ambeerlovee3618 5 ай бұрын

Hey will this stop the car from having a rough shake & idle I have a Audi A4 09

@rsrambo7090 Жыл бұрын

Whats the torque spec on the bolts holding the valve cover on?

@user-fr7hm7ju8n Жыл бұрын

Did you install new bolts seals or no? ???

@last-real-1gh117 Жыл бұрын

So my oil looks frothy is this the reason? 2008 a4 b72.0t thanks

@ScrubTactics 2 жыл бұрын

Hi, I got a question. At 9:00, is that a torque wrench you use or can you use a normal screwdriver to tighten the screws? Thanks

@CraftyWorkshopBuilds 2 жыл бұрын

I used a torx socket and a ratchet and tighten by hand. You can use a torque wrench with the socket if you wish.

@andreasmarklund670 2 жыл бұрын

great video!! did a failed pcv-valve cause this problem or was it something else? thanks

@CraftyWorkshopBuilds 2 жыл бұрын

Thanks! Nah, this gasket was just old which caused it to leak.

@mark.r8900 Жыл бұрын

Hi, can i use a 2009 a4 valve cover on a 2007 a4 model? Thanks

@Cards36555 Жыл бұрын

Changed mine today but I got a red oil pressure light come up on the dash straight after???? Any thoughts mate?

@frankburkett7453 Жыл бұрын

Start by double checking that the gasket did not get pinched and all the hoses and fitting were reinstalled and double check all the valve cover bolts are snugged down.

@LARYNX4OUR5IVE 2 жыл бұрын

Do I have to drain the oil first? Or can I do the Job on the spot at home as the car is my daily

@CraftyWorkshopBuilds 2 жыл бұрын

Nah, no need to drain the oil.

@LuisGabriel1309 Жыл бұрын

I have a question I'm thinking of purchasing the 2008 Audi A4 quattro 2.0 original OEM Audi valve gasket kit that comes with new screws, valve and PVC gasket just in case the screws are messed up and make sure I completely stop any oil leaks while I'm at it just change the pcv gasket since it comes with the kit. When changing the screws does it come out easy? When changing the pcv gasket remove and install like the valve gasket right? I want to make sure I do the job the right way. what size of the hose clamp I need to buy once breaking the original Audi clamp? Do you recommend to change the oil after this job? I recently change the coils and spark plugs on my car since I have the oil leak problem do you think it's good to change the spark plugs again since it have oil on them? I was thinking of changing them again. Hope you answer all my questions sorry for asking so many questions but I want to make sure I do a great job.

@frankburkett7453 Жыл бұрын

The hose clamp should be slightly larger then the hose, no need to change the oil as long as its with in the mileage range, also no need to change the plugs if they are good just wipe them off and check the plug gap for good measure- .032 I believe.

@rickjackson7042 2 жыл бұрын

swesome!!!!!!

@CraftyWorkshopBuilds 2 жыл бұрын

Much respect!

@swaggyf7537 3 ай бұрын

Wouldn’t you want swap out the valve cover bolts as well since they also have o rings to it?

@kevinschmidt3711 Жыл бұрын

Just got my recalled airbags replaced in my b7 a4 and they quoted me $4600 in repairs and i bought the parts for $500 off ecs and surfed youtube and did all the work myself and saved the labor cost. The only thing that eludes me is the low windsheild washer fluid sensor replacement...

@frankburkett7453 Жыл бұрын

I can only imagine if its anything like the windshield washer pump- you have to pull the whole front clip and intercooler...

@kevinschmidt3711 Жыл бұрын

@Frank Burkett thats exactly right. And ive driven enough beaters to be able to deal with a low washer fluid warning light everytime i drive lol

@tonythevlogger6933 3 жыл бұрын

👍👍👍

@bumbummedia3793 Жыл бұрын

I’m looking to get me a 2005 A4 avant- Quattro wagon here in the US. 6 speed manual.

@TOLDUSO4EVS7676 9 ай бұрын

Yeah it's gonna get done now have some leakage . Have a good one.

@erenisg5715 2 жыл бұрын

Do you have part number or link on the gasket? I’m in the uk

@CraftyWorkshopBuilds 2 жыл бұрын

Hey, I just added the link in the description.

@winstoncornwall4186 Жыл бұрын

I’m having difficulty finding parts for 2008 Audi A4 2.0 any recommendations?

@CraftyWorkshopBuilds Жыл бұрын

What parts are you looking for?

@JoseGuzman3927 8 ай бұрын

Do you think i might need to change the gasket, if its leaking oil throughout the screws?

@CraftyWorkshopBuilds 8 ай бұрын

Yes, the gasket is what seal the screw holes and prevent the oil from leaking out.

@JoseGuzman3927 8 ай бұрын

@@CraftyWorkshopBuilds thanks for your video.

@silvarodriguezzahiddejesus7859 Жыл бұрын

Hello, when the packaging is damaged, does it cause a spark plug to get wet with oil? Or it's probably another problem.

@CraftyWorkshopBuilds Жыл бұрын

Yes, if the gasket is damaged it can cause oil to leak into the sparkplug tube, onto the sparkplugs.

@louisgabrielle2154 2 жыл бұрын

I have a few questions when changing the valve gasket. Do you have to replace the valve gasket screws bolts? I think it's 14. Do you have to thight the screws bolts in a sequence using a torque wrench? What would be the sequence? You make this job look so easy but I think I would mess up everything. Lol

@CraftyWorkshopBuilds 2 жыл бұрын

Nah, I reused the screws once they are in a good condition. There is a torque sequence and torque specs for the cover, you could find the specific details if you search for the manual online. But, I've done a lot of valve cover jobs, so I now just tighten by hand. Lol, nah you shouldn't mess anything up, once you take your time.

@louisgabrielle2154 2 жыл бұрын

@@CraftyWorkshopBuilds Thank you so much for taking your time to do the video and time to message back. I did look for the manual to see what's the torque specification but some say is 7 ft lbs of torque others say is 8 ft lbs and I seen 10 ft lbs. Now I'm more confuse. I also read that you have to tighten the bolts 3 times in that criss cross pattern I seen the diagram. I think you start with the 1 and 2 then go down to 3 and so on until you do all 14 bolts 3 times in sequence and you torque it the 3 time. I have a 3/8 torque wrench that don't have 7 nor 8 ft pounds it starts with 10-80 ft pounds. Can you help find the specific torque and should I buy another torque wrench that starts with 5 ft lbs of torque?

@locityx 2 жыл бұрын

shop wants to charge me $450 just to change the gasket, and $900 if i want a new valve cover which they “recommend” do i need an entire new valve cover? or just replace the gasket myself and call it good?

@Meme-kc1lf 4 ай бұрын

Replace the gasket with a little RTV on any corners and you should be good to go

@jorgeandrade7872 2 жыл бұрын

Do you think is the same process to change the gasket of an A4 2013 ??

@CraftyWorkshopBuilds 2 жыл бұрын

Nah, it's a different motor and different process.

@jorgeandrade7872 2 жыл бұрын

@@CraftyWorkshopBuilds thanks 🙏🏻

@LuisTorres-fq3pm Жыл бұрын

Where did you order the gasket

@CraftyWorkshopBuilds Жыл бұрын

Link in the description

@KemoDonTV 3 жыл бұрын

👍🏿

@saga420nbk 8 ай бұрын

Did you use new bolts.???

@CraftyWorkshopBuilds 8 ай бұрын

Nah, same bolts.

@kayymart8217 2 жыл бұрын

So all you need to replace is the rubber seal when you have a leak?

@CraftyWorkshopBuilds 2 жыл бұрын

Yea, pretty much.

@TheHuamantla Жыл бұрын

Where did you order your parts for the Audi.

@CraftyWorkshopBuilds Жыл бұрын

Links in the description.

@TheHuamantla Жыл бұрын

@@CraftyWorkshopBuildsThanks

@glenwhitestofer6420 Жыл бұрын

Just disconnect the two hoses to the pcv ,so much easier

@DarkHorse26238 2 жыл бұрын

A+++

@CraftyWorkshopBuilds 2 жыл бұрын

Much respect!

@mosesyoli4243 Жыл бұрын

My audi b7 2005 cut off while driving now doesn't wanna start even to swing starter what is a problem

@CraftyWorkshopBuilds Жыл бұрын

If it shuts off while driving, it's more than likely not a starter problem. I'd suggest checking the Alternator first.

@kevynova1 2 жыл бұрын

Hey, I have a question that i think you might be able to answer. I own the same car and engine as you are working on here. I need to locate the engine number that is stamped into the engine block, but no one can seem to locate it. would you be able to describe the location please? great video btw.

@kevynova1 2 жыл бұрын

my engine number starts with BWE if that any help, and its a 2007 2.0t a4 s-line quattro.

@CraftyWorkshopBuilds 2 жыл бұрын

I just checked an engine that I have laying around. I wasn't able to locate the number, there is too much things bolted onto the block currently. I'd have to remove all the accessories to have a better view.

@kevynova1 2 жыл бұрын

@@CraftyWorkshopBuilds thanks for the reply! That seems to be my problem too. Ive never had this much trouble locating the stamp on the block, I’m about to take it to the roads department to get registration. Fingers crossed that they put it through without physically seeing the stamp. Keep up the good work. Cheers

@CraftyWorkshopBuilds 2 жыл бұрын

@@kevynova1 Good luck on the registration. Thanks for checking out my content, much respect!