2005-2009 ford mustang transmission removal. (Easy way)

Рет қаралды 16,608

1Wayfix

Жыл бұрын

Any question leave in the comments. And don’t forget to subscribe thank you. 😀😀🙏

Пікірлер: 123

@Santiknws23 Жыл бұрын

Great video! I’ve watched a bunch, and this one of the most informative. I’m so happy I don’t have to remove the exhaust.

@1Wayfix Жыл бұрын

Thank you. Any question leave here i will do my best to help 😀😀😀

@JoshWellborn 7 ай бұрын

Pro tips included… This was VERY helpful! I removed my transmission following your instructions… it only took me two days! Haha! I’m glad I didn’t remove the exhaust. Pro tip 1: I did, however, have to remove the transmission pan to remove the mount (mine was slightly larger than the one in your video.) I had to put the pan back on to put the jack in place. Pro tip 2: Also, I removed the entire drive shaft, so I could get my head up there to see the mounting bolts on the top.

@1Wayfix 7 ай бұрын

😅💪💪I glad this video help. You. 2 days 😅😅. But probably not all day long working on it. Don’t forget to replace the transmission filter then. And put the right amount of fluid. Any question leave here I will do my best to help 😀😀😀😀

@Frugleclock 17 күн бұрын

I’m 12 min into the video gonna finish the rest tomorrow thanks bro much love ❤

@1Wayfix 17 күн бұрын

@@Frugleclock ur welcome. Thank you for you comment 😃😃😃

@MrHerrjon 26 күн бұрын

Great video, great detail. Thank you!

@1Wayfix 26 күн бұрын

Thank you for you comment .any question leave here. I will do my best to help. U. 😀

@Anthony11qq 7 ай бұрын

Great job. Thanks for making this video

@1Wayfix 7 ай бұрын

Any time anthony. Any question leave here. I will do my best. To help. 😃😃😃😃

@sinsix4408 8 ай бұрын

THANKS DUDE HELPED ME OUT ALOT

@1Wayfix 8 ай бұрын

Any time. If you got any question leave here in the comments I will do my best to help 😊😊.

@Quenton-nc8kj 3 ай бұрын

Thank you my guy.. you the man!!!!!

@1Wayfix 3 ай бұрын

Thank you. Any time. Just. Leave any question here. I will do my best to help. U. 😀

@YbcTayda1 Жыл бұрын

Great video bro thanks

@1Wayfix Жыл бұрын

Thank you. Any question. Leave here. For any type of car. Or truck. Bikes. Anything that use fuel 😃. Ill do my best to help.

@adamboone6864 2 ай бұрын

You removed your transmission with one hand 😂😂. That’s freaking awesome.

@1Wayfix 2 ай бұрын

😁 you just have to get you jack on the right spot

@user-ni4mq4hi1d Жыл бұрын

what can i do the flywheel don't turn to remove the 4 bolts and the shift is on neutral from under the car 07 mustang and need to remove motor any tips?

@1Wayfix Жыл бұрын

Well the only option will be. To lose the transmission. And pull the transmission back. That way the torque converter. Will stay stick to the flywheel. Then you can pull out the engine. And. Then you can figure it out to remove the bolts. Outside. ➡️➡️ let me know if you got another question 😀

@Hectorreyesgarcia 4 ай бұрын

Eres mi idolo canijo

@1Wayfix 4 ай бұрын

😂. Ni pa tanto. Gracias. Saludos. 😃

@JoshWellborn 6 ай бұрын

I’ve rebuilt my 5R55S. How do I align the torque converter to re-install? I marked the last stud and corresponding hole on the flex plate… Do I simply align that stud with its corresponding hole?

@1Wayfix 6 ай бұрын

Yes. But. Check when you have the transmission housing. Close to the engine to Make-sure Its going in the right direction. Just make sure the torque converter don’t slide out.

@JoshWellborn 6 ай бұрын

How do I make sure the torque converter is in all the way? I’m told there should be 3 “clunks”, but I only hear 2 clunk sounds.

@1Wayfix 6 ай бұрын

@@JoshWellborn try a couple times. But the only way. To know Is if you cont not. Slide u finger. To the back.

@MrHerrjon 26 күн бұрын

Oh hey, what about the diagnosis? What codes or lack of codes? Thanks!

@1Wayfix 26 күн бұрын

No codes on this one.

@Ravichauhan0807 2 ай бұрын

Bro i have questions for 5r55s mustang 2008 v6. Previously this car shifting funny. I change fluid and both od and intermediate servo. Now m facing a complete gear lose no d no r but move in d3.d2.d1. And some time move in D.

@1Wayfix 2 ай бұрын

Any codes ?

@Ravichauhan0807 2 ай бұрын

No codes but od light flashing

@1Wayfix 2 ай бұрын

@@Ravichauhan0807 well at this point what you can do is open you transmission pan. And check for anything. Laying on it. Like something broken.

@Ravichauhan0807 2 күн бұрын

@@1Wayfix thanks for your replay but i swapped it for a used one and my original tranny has servo bore issue.

@guajardo172 Ай бұрын

What size jack stands did you use?

@1Wayfix 29 күн бұрын

I used the 6ton. Stands. 😀

@LaheyJimm 3 ай бұрын

Should’ve made an installation video!

@1Wayfix 3 ай бұрын

You right. But most the time is in reverse order. Thank you for you comment. If you have any questions leave here. I will help you. 😀

@LaheyJimm 3 ай бұрын

@@1Wayfix do you mind listening it in order for me please I had someone take it off but I’m struggling with putting it on

@1Wayfix 3 ай бұрын

@@LaheyJimm what i can do is. Get you the video in reverse order. So you can watch. That way. Let me know.

@mariogrado9155 3 ай бұрын

Bro, do you where output speed sensor is ?

@1Wayfix 3 ай бұрын

Should be input and out put. Speed sensor. Let me check the diagram. What year is yours ?

@Titanic19127 2 ай бұрын

That was fast

@1Wayfix 2 ай бұрын

I did around 8 Already. Thats why. Don’t take me too long. 😅

@Titanic19127 2 ай бұрын

@@1Wayfix If I ever needed it replaced I would pay you for sure!

@MariaRivera-ck2tj 5 ай бұрын

Hey I swap my transmission but torque converter wont spin look like it stuck trying to re install the nut

@1Wayfix 5 ай бұрын

You have to be careful. Because you have to alignment. The torque converter. Stud. With the flywheel holes.

@1Wayfix 5 ай бұрын

Back it up. A little bit. Then. Put. One of the holes. Of the flywheel. At 6 a clock. And do the same. With the stud of the torque converter. Both at 6 a clock. Then bring it both together.

@MariaRivera-ck2tj 5 ай бұрын

Ok thank I’m try so …other problem I got is that drive shaft is to short now does that mean I got to get a new drive shaft

@MariaRivera-ck2tj 5 ай бұрын

@@1Wayfixother problem I have the drive shaft is to short now

@1Wayfix 5 ай бұрын

@@MariaRivera-ck2tj did you get the same transmission

@LaheyJimm 3 ай бұрын

Will a 05 v6 tranny fit an 08 v6?

@1Wayfix 3 ай бұрын

Should be the same Just check the Identification number on you transmission. To Match them. 5r55s. Should. Be the number.

@user-fu4fo5ro1l 6 ай бұрын

Is this the same process for a 4.6?

@1Wayfix 6 ай бұрын

Should be all most the same .you can follow. This video to guide you. If you have any question i will do my best to help. 😃

@user-fu4fo5ro1l 6 ай бұрын

Thanks

@CocinandoFinanzas 11 ай бұрын

Do I have to drain the oil if I'm just trying to lower so I can get to the back of the engine?

@1Wayfix 11 ай бұрын

You trying to remove the transmission ?

@CocinandoFinanzas 11 ай бұрын

@@1Wayfix I need to replace the timing belt chain cassette but I dont want to mess with taking out the engine so doing some research I found out that if I take out the transmission I can get to the back engine bolt to release the broken cassette

@1Wayfix 11 ай бұрын

@@CocinandoFinanzas i got. You. Well You can. Drop the transmission. And just drain the fluid And. Save. It. To. Get it back. In to it. Because. It will drop fluid from the tail. When you get it out. But. If you drain what is in the pan. I dont think. It will drain.

@leoFive789 Жыл бұрын

Seeing this video because I don’t know if I should get my transmission worked on, or just replace it completely :/. I got the diagnosis and the mechanic said I needed new solenoid blocks, and service, he was charging me 900$ my transmission would slip going into 2nd, or start at second. The car ran fine when I took it to the mechanic, but I used it to get to work, and when I got home I could hear a whining noise, sounds like if I have a supercharger so I don’t know if the transmission is now beyond saving, or if I should take it to the mechanic, thanks! What would you recommended?

@1Wayfix Жыл бұрын

Can you record a video. Of the noise and send it to me. Find me on Facebook. …Colas solorzano ….

@1Wayfix Жыл бұрын

Can you send me the codes. List. Too

@leoFive789 Жыл бұрын

@@1Wayfix damn, forgot to memorize the codes, probably nothing much you can help with without them huh? Just stuck on fixing it, or completely replacing the trans

@1Wayfix Жыл бұрын

@@leoFive789 where you located ?

@leoFive789 11 ай бұрын

@@1Wayfix Ventura cali, but I have one more question, I got it scanned and the guy who did it is a mechanic and said the second solenoid was fcked along w other things, he said he has to get a full solenoid pack for all gears, bc mustangs only have that option, for that he’s charging 350+ labor, and then he said to “service” the transmission is gonna be like another 500, so in total he said 900, is he charging me right? Or too much? Or what do you think bro

@RobertYayo 10 ай бұрын

Do I have to make any markings?

@1Wayfix 10 ай бұрын

What do you mean markings? Can you explain please. 😅

@RobertYayo 10 ай бұрын

@@1Wayfix someone said to mark the torque converter and flywheel

@1Wayfix 10 ай бұрын

@@RobertYayo no you dont need to do that Just make sure when you. Putting everything back. Align you torque converter with the flywheel holes. So you can slide. De torque converter. Right on Each hole. If you dont so that. The studs. On the torque converter will push the flywheel. And it can brake it. I hope i is explained the way you can understand me. Any question leave here. I will do my best to help. 😀😀

@RobertYayo 10 ай бұрын

@@1Wayfix i understand thank you

@theogoosby7035 Жыл бұрын

2006 4.6 Automatic transmission problems no codes not going in drive or reverse

@1Wayfix Жыл бұрын

Im thinking. The transmission is damaged already

@1Wayfix Жыл бұрын

Check for transmission leaks. If no leaks. Lift the car. Put some stands. Under. Start the car. But. Make look level front and back. Remove de volt Under the transmission pan. Then should. Start dripping. Fluid. Out. If not. The transmission is bad. Because the pump. Has no pressure. To move the fluid

@theogoosby7035 Жыл бұрын

@1Wayfix ok thanks

@1Wayfix Жыл бұрын

@@theogoosby7035 any question. Leave here. I will do my best. To help. 😀💪💪

@GrumpySteve Жыл бұрын

Hi great video, this is a 4l 6cyl, easier than GT, right? How high did you lift the front? I have 1 2 3 gears but no drive or reverse, what do you think? Mine is a 2010 but looks the same.