2005 2010 Jeep Grand Cherokee and Commander Front Seat Cover Replacement

No video

2005 2010 Jeep Grand Cherokee and Commander Front Seat Cover Replacement

Рет қаралды 14,975

Күн бұрын

In this video I will putting better condition leather on the death seat on my Jeep. This way may take more time compared to buying the whole seat at the junk park but this way is way cheaper
Follow VGAPR Garage on
Facebook vgapr97
Instagram @JoshuaTPotter
Email VGAPR97@gmail.com

Пікірлер: 30

@jeffreybrodhecker1367 3 жыл бұрын

Thank you for showing the types of clips these are. Every single other video just goes "unclip the wires" as if that isn't the most difficult part of the job. Any jock with half a brain can remove a few bolt, but removing these wire harnesses without breaking them is such a pain in the ass sometimes

@williameverett8187 2 жыл бұрын

I just bought a new seat cover for the bottom of the seat off ebay and installed it with no problems. Thank you for your very informative video!

@hondaguy9878 2 жыл бұрын

Just replaced the bottom cover. Took me a few hours. As for the hug rings, I reused the old ones. Simply opened each hug ring appx. 1/4" using plyers during rod removal. Then for the install, I forced each hug ring back onto the rod and closed them using regular plyers. First was the side rod, then the center rod, then the other side rod. Worked well. Great video! Wouldn't be able to do it w/o it.

@OgVlaskad 2 жыл бұрын

Absolutely fantastic video! I bought a new seat bottom off of ebay and installed it in a couple hours using your tips/ direction. My drivers side plastic panel was also broken. Looks like a slight design flaw. Great job & keep it up!

@allfourone3 Жыл бұрын

Worked like a charm to replace a bad belt buckle. Less than an hour job. THANK YOU

@etalc1404 3 жыл бұрын

I needed to replace the seat belt pretensioner to resolve an airbag light issues ((B1 B28) 1st row driver seatbelt pretensioner circuit low) on my Jeep Grand Cherokee. Your video was very thorough and extremely helpful in helping me with this task. Thank you much for providing it.

@timothysimpson912 2 жыл бұрын

I watched several videos. This was the most useful. Doing XJ seats but close enough.

@paulmarshall2453 Жыл бұрын

Brilliant video, bought a donor car and will swap out the seats thanks for your efforts

@FrederickGFX 4 жыл бұрын

The rain in the background is giving me ASMR vibes

@wolfgangdallmann943 Жыл бұрын

Nicely explained. Very helpful. Thank you

@mikeodell2911 2 жыл бұрын

Great instructional video and I'll be changing mine out soon! Two thumbs up!!

@mwhughes3177 3 жыл бұрын

Thanks- was looking how to remove the door side panel of the seat. My Commander's looks like it is broken at the same spot yours was attached to the seat when you removed the panel.

@jacobolmos2475 2 жыл бұрын

Did you swap it out yet? I have a Commander and am also thinking about doing this.

@mwhughes3177 2 жыл бұрын

@@jacobolmos2475 I bought the part and am waiting to replace when the existing literally falls off. The design is problematic, so I wanted to grab the part while it was still available.

@stretchstretch9112 11 ай бұрын

Awesome

@802Garage 4 жыл бұрын

First y'all! I've had a preview and the results are great. 👌

@earnestmetz9834 3 жыл бұрын

Excellent video.

@StevenSteurer 3 жыл бұрын

This video is awesome and very helpful. Thanks! It looks like if I only need to replace the bottom cover I will not need to take the plastic covers off of the sides of the seats. I looks like the only reason you did that was because you needed to also replace the back cover. Is that true?

@geoffreymccaleb Жыл бұрын

Did you ever find out? In the same boat.

@jsanco 3 жыл бұрын

Hi, thank you for the video, @ 3:38 that switch I have not been able to find where is plugged. Do you know what it does? I even removed again the seat and couldn't find where it goes. Any insight is really appreciated

@jth1987leb 3 жыл бұрын

Chrysler in the late 90s and early 2000s often put full spec optioned out wiring harnesses on cars without the option to save cost by makings fewer harnesses types. Depending on your trim level you may find connectors that go to nothing. Like this Jeep doesn’t have heated seats but all the wiring in there from the factory. Some Jeeps didn’t come with heated side mirrors. If you plug in a heated side mirror it will work. Same with the auto dimming mirrors and auto headlights. I hope that was helpful.

@geoffreymccaleb Жыл бұрын

Is it possible to remove the wiring harness of the bottom in situ without having to pull the entire seat out? It looks like once you remove the two bolts, you just need to unclip the wiring harness?

@jth1987leb Жыл бұрын

It depends on the options in the seat

@geoffreymccaleb Жыл бұрын

@@jth1987leb What options allow that to work? I’ve got an 07 WK, with what I thought was standard options

@evansolomon169 2 жыл бұрын

Thank you, Mr. Gay Man.

@cocorkiller2322 4 жыл бұрын

Looking to order new skins for my 97 wrangler seats.. Anyone know a good spot?

@timothyschulz6319 2 жыл бұрын

Love the video but I think I would have just bought the entire seat to replace

@jth1987leb 2 жыл бұрын

It’s very difficult to find a driver seat leather in good condition. That’s why I used the passenger side leather for the drivers seat. Also to buy a seat at the junkyard is expensive. Taking the time to remove the leather made the total 7 dollars