No video
2005 Chevy 2500HD Pitman Arm replacement
Рет қаралды 11,604
Күн бұрынDetailed video on how to replace a pitman arm, specifically on a 2005 Chevrolet 2500HD with the 6.0L gas engine (details may be different for the 8.1L and diesel).
Tools required:
Properly sized pitman arm puller
21mm socket and wrench
32mm socket (it'd be nice to a 32mm wrench)
Impact
3lb sledge
pry bar
jack stands, jacks, blocks
This video is for demonstration purposes only. Any work you undertake is at your own risk.
@DanWright-w7x 14 күн бұрын
take the 4 bolts off holding the Sway Bar and you can pull down out of the way and have plenty of room
@thefoos8086 3 жыл бұрын
I need to do a follow up video here. Perhaps this next weekend. Ive done a bunch of work on this truck. The steering feel malfunction ended up being the steering gear. Drives great now.
@reddbulll7644 Жыл бұрын
Just as a note mine is a 4x4 model axles is on the way kinda😂😂 good video brotha
@rocketsurgeon1746 2 жыл бұрын
Thanks for posting
@butchtheiw 4 ай бұрын
And why don't you use pickle forks?? They've worked great for me!
@thefoos8086 2 ай бұрын
The original set I had was from Harbor Freight, and they broke immediately. Plus you run the risk of damaging the rubber boots. I've found that disrupting the metal bond with a sideways hammer strike always works. So it became my default practice and one less tool in the box. Of course, just my experiences and opinion. Not going to toss shade on someone else that is using a method successfully.
@ArmenArmenjs 2 жыл бұрын
Good Job, did you take off the 11mm steering shaft bolt from gear box?
@arturohernandez7016 2 жыл бұрын
But you never show how to remove the Pitman arm literally
@thefoos8086 2 жыл бұрын
Sorry man, just figuring out how to film stuff. Given the equipment I had at the time, I couldn't get a good shot.
@MrStaybrown 2 жыл бұрын
Click bait
Danny Johnson’s Garage
Рет қаралды 265 М.
a DIY Car Guy
Рет қаралды 157 М.
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 51 М.