I'm glad to see someone who knows how to remove the terminals without having to splice wires. Spliced wires always have the potential of being another problem.

Your instructions were great. I replaced both the blower and the resistor on my son's car (also a 2005 Chevy Tahoe) and probably saved $400 in parts and labor.

Thumbs up within 70 seconds of the video. Smart man!

I work in heavy equipment & drive a truck for my dad hauling construction materials. About a year ago before,my dad & I sold our two gravel pits,I used my mind for ingenuity like this on a daily basis. Me being 33 years old,seemed like not very many my age,who I had hired & tried to help them out with a 50+hour paycheck knew little to none at all about how ppl with an ingenuous mindset actually saw day to day life. Btw, wiring is something I'll walk away from. It's the one thing that I'll admit,can beat me & get the best of me. Therefore,I've always chose the easy way out. However,when it comes to my 2007 2500HD classic model personal vehicle,I would/do personally like to fix & change all my oils,any problems or hiccup's that come along with owning a vehicle. My friend,I would personally like to thank you,for your advice,also I'd like to thank you for having & caring enough about any random stranger in the world,who watches KZfaq. 5/24/2020 I received a blessing. That blessing was you Mr. Lonny & your incredible second to none video on installing this blower speed control power module. Thanks alot Lonny. God bless

Thank you very much for your video. Im dealing with that problem for 2 years! And i just done fix it and boom my air blowing again. I forgot remove the fuse and i blow it. But i put new right away. THANK YOU FOR THE PROFESSIONAL AND PATIENCE TO HELP US!!! GOD BLESSYOU VERY MUCH👏

Replaced the resistor with hardest part being swapping the wires. Might’ve been easier to splice but I feel more secure this way. Great video!

Your video just literally saved me from cutting the wires and raising my anxiety! This worked like a dream. You sir are a hero!

Well done. In researching this replacement, I was amazed at how many parts/part numbers there are for the factory part, even for the same year. Finding the exact right part is harder than the actual replacement...Good ol GM.....Thank you very much for putting this together.

You da man! Spent an afternoon getting ready to do this job and this video is the bottom line on getting it done. Thanks!

Seriously dude, thank you so much. This made everything so much easier and better. Especially thank you for pointing out the little clips in the harness. I was REALLY dreading having to splice wires. A++

Thanks Mr. Johnson. I just replaced my first blower motor resistor thanks to you. I can do the usual vehicle maintenance, but I’ve never been very good at the more involved repairs, especially when it comes to the engine, AC, etc..... Sure, it took me 4 hours longer than it took you, but I did it and I’m stoked. (After also watching video about 15 times). Hahaha. I’m a hero in my house today for sure. Thanks again.

Just finished this job 5 min ago. Great video worked exactly as explained. Thanks.

Out of all the other videos Your the best 👍👍 ... You gave more details and the first thing I did when my blower wouldn't shut off..... I tried to pull the fuse out which is difficult so I had to undo the battery while I wait for the part 2 come

Thanks for this Lonnie. While this probably took me longer than just splicing, I really like the way it looks.

I bought the resister over a month ago for my 2005 but haven’t had the time to work on it. But, I have watched your excellent video twice late at night! I could splice and solder quicker but I really like the clean look of your approach and plan on following your instructions. Thanks for the great detail and clear, direct to the point instructions. Update: I used your approach and my blower is working perfectly! Getting the wires free of the connectors was a bear. I obviously wasn’t freeing the clips and ended up cutting apart the connector from the blower to free those wires. Once I figured out that you remove the blower by pushing aside the plastic clip then twisting the blower it came out easily.

Thank you!!!! I have a 2005 Chevy Tahoe & someone trying to charge me $65+ to put my part on! I can do this myself.

Thanks you Sir. Followed your instruction to the "T". It now works perfectly. Most appreciated!!!

Thanks for the tip on moving the wires to the new plug. Worked Great!

Thanx bro I was just about to start cutting and soldering until I saw this video good stuff very helpful

Awesome video. Worked PERFECTLY for my 03 Tahoe. Thank you!

Thanks for the video! You saved me a trip to the mechanic and lots of 💰💰💰

I have done the same thing. Using a gm disconnect terminal tool.Done the correct way. Great job. No cutting splicing or soldering needed.

good job. Just got done replacing my resistor before I saw your video. I can appreciate the information about how to disassemble the clips (didn't know this could be done) but honestly I used quality butt connector terminals and was done in half the time that you were. If it is all under dash, it shouldn't matter

Super informative, very awesome thank you so much! You made this job easy

Thanks for the video, everything worked great definitely helped me out

Thanks so much buddy. I like this look a lot better. Truly an awesome job! Thanks again!!

It was very very helpful very helpful I really appreciate it thank you so much

I don't know what wonderful thing I can say that others haven't said but you da man and this video is nothin but the truth, I'm glad I found it, glad LonnieJohnson1 made it, glad I did it. I much prefer this over cutting and splicing even though there's technically no problem in doing so. It's much cleaner this way and of course my motor is blowing strong!

Thank you! Works Great!! Good Video

I wish I would've found this video earlier! Damn smart !!

You’re Super Awesome Dude, Thanks A Trillion, And Blessings!

Great video! Thanks so much

THANK YOU SO MUCH I JUSTED FIX MY YUKON 04

Thank you so much for your video, it was very helpful 😁🙏❤

Good video well explained

Ver good vedeo thanks for sharing it.. i did mine the exact same way works great..

Nice job..Thanks

Appreciate it Lonnie👍🏾

This video is if you have the Auto Temp Digital controls. The Alternate is the Dual Slider Control, which has like 6 wires. Follow a good wiring diagram because some pig tails now use black and white wire only.

Why would anyone cut wires once you see the correct way! Why easier and a real repair. Thank you!

I bought a 05 Tahoe a few weeks back, blower had no problems this week it’s been -10F for 2 days blower wouldn’t work right away, in morning 5 min into drive kicked on, next morning started car it came on then at work today started car it didn’t come on got down the street and it came on, loose connection or resistor? What’s your guess.

folks this is the way a damm video is supposed to be done, simple, to the point, no punk music blastin in the background. Well done Lonnie, and btw, i have same truck as this, front blows hot, back blows cold. I have recalibrated my blend doors a few times, it works for awhile then goes back to hot, and i'm in SE Texas where the heat is insane. What do i need to change out to stop this, and do you have one of these grade A vid's on it. Thanks man....Roost

Thanks for the tip. Just finished up but the resistor is pretty hot to the touch , is that normal ?

If my Tahoe heat is not cutting on on number five would this video help me

Will this work the same for the non Digital blower control module..? I have the same truck mine just has a different control module.

Was your blower on full bore when the vehicle was running, and this allowed the fan speed to vary properly? Mine is on full power and just wanted to make sure this would work for mine as well

Thank you for the video! I replaced the resistor motor, and checked all the fuses, but the air will not blow out of the front vents. It does come out of the back vents still with no problem... what now?

Best video & explanation ever! Question...My dad has a 2004 Chevy Tahoe, same issues...I noticed when I plug in his info I get more than one Blower Resistor Replacement Part. Would you possible know the difference between the JA1582 ($60) and the JA1639 (which you used at $103)???

I have no control of the speed, also when I turn my vehicle off the fan continues to blow. so I pull that fuse every time I shut my vehicle off. that would be caused from the part you just replaced correct?

Yup, wish ida seen this before I went cutting!

Might anyone be able to direct me to where on the car the blower relay is located? I also have an ‘05 Tahoe.

What if I just use a wire twister connector? I did that and it works fine. Should there be a problem in the future?

Do they not make a OE replacement? I'm having trouble getting the part - now I guess I see why?

I replaced the blower and resistor on my 04 yukon and at first it was blowing and a few mins later it stopped blowing. Fuse is fine, the red wire is receiving power. I’m lost on what else to do. My AC was working but I replaced the blower because of a bad noise. Now I regret it. Have any idea what to check next?

So whenever i shut my car off my blower. Stays running ultimately killing my battery if i replace the resistor does this fix that issue?

Thanks so much for the post. My blower isn't working at all. I will try and replace the resister. Which me luck

My 2004 GMC Sierra was squealing like a banshee when it got really cold here and I had any fan setting on (until truck warmed up after 30 or so minutes), couple days ago I smelt some burning and the fan speed knob no longer kicks on any air flow at all. Did my blower motor crap out, or resistor? I looked at the harness plug and it doesn't look like any wires are burnt/melted.

I had a new resistor installed in a 2002 Suburban, ever since I have had a battery drain, takes bout a week to drain to point where it has to be jumped. It's not the battery, less than a year old, had it checked. Anybody have any ideas? Is there anything I should check?

got my part from rock auto 60.00! ac delco #15-81773 nice video!!

BOO YAAAAH!!!💯🧰🔧

اوكي

Thank you for the video it helped me for about a year now it’s not working again. Some times when I shake resistor it starts work and some times it doesn’t .. obviously the connection may have loosened any advice ?

It's 10bucks on eBay. Free from pull a part.

5$ bucks😱

I just gave the vehicle away cause I blew that expensive $5 fuse. I was at the parts store and said how much fer this here fuse they said about 5.50 I said come again they said about 5.50 so I told that sum bitch here's the keys it's urs I can't afford $5 fuses I'm no Mr Rockefeller I tell u what

If you would have bought the correct resistor, you wouldn't have had to do that. Plug and play when using the correct parts. Heck, looking at the picture before buying would have told you that you were wrong.