2005 Dodge Ram 1500 Transmission Failure - Ram Truck won’t move!Acts like it’s stuck in neutral FIX!

No video

2005 Dodge Ram 1500 Transmission Failure - Ram Truck won’t move!Acts like it’s stuck in neutral FIX!

Рет қаралды 20,100

Күн бұрын

Quick video showing a filter malfunction in Gen 3 Dodge Ram 1500’s. The Primary filter/Filter bushing fails causing the transmission to lose line pressure; thus not allowing torque converter to engage. If your Ram hesitates to go into gear when it’s cold, or fails to engage in any gear, this could be the issue you are having. Save yourself some $$ and grief!!

Пікірлер: 43

@davidpiedmont5441 Жыл бұрын

Thank you!!!!! It worked! You just saved me $3500! Any gear that I put my 08 Dodge Ram in would act like neutral. I replaced the transmission filters and bushing. Now she's running fine. You are a lifesaver, thank you so much!

@CarModsGarage Жыл бұрын

Oh man, I hope this is my problem. After transfer case explored the front drive shaft for everywhere. I hope that's what got loose on mine. Will open tomorrow to see. Right on brother

@hienqsang Жыл бұрын

Yo!!!! I just wanna say I change the filter and yes!!!! I felt like I won the lotto when it works! Thanks so much man!

@rossdillard9886 2 жыл бұрын

I did use a socket and a mallet to set that seal……have had no issues since

@vincentleatham8291 Жыл бұрын

I do love this bumper beautiful shape

@zacharyshrewsbury7272 Жыл бұрын

Thank you brother...this is what went wrong with mine.

@sly88m Жыл бұрын

Did it stop working wile driving and dint get gas plus did it sound like a turbine

@robertdelph1717 Жыл бұрын

It works I just did it today and it work it was the same way now it works thanks

@zackdaniels6858 Жыл бұрын

SWEET MOTHER OF ROSS DILLARD! my 2005 ram 1500 hemi just did this exact thing. Praying this is the issue my Friend. Thankyou. Zack Daniels.

@miggywiggy11 Жыл бұрын

Hope that's what's wrong with my 05 2500 ram. Was driving down the road all the sudden start to act like it's in natural in all gears. Thank you. I'll have to check this out

@johnhernandez7545 Жыл бұрын

Thanks for the video I thought I messed up the transmission I have a 2004 dodge ram 5.7 4x4 and just went neautral I put it on reverse, drive, 1st and 2nd and no action I'm about to change the filter and what goes in there and hope for the best

@hienqsang Жыл бұрын

hi john i was wondering if that worked it's happening to mines right now and trying to figure out whats wrong. i leaning towards changing the transmission selenoid shift but don't want to if it i spent all that money and it doesnt work. any information I greatly appreciate it man. Thanks

@billkoranda45 Жыл бұрын

Really helpful thanks

@Michael-B41 17 күн бұрын

probably because most people just push it in by hand i took a socket lightly hit it til it sit flush then installed filter

@MarioRamirez-uf1sh 29 күн бұрын

Tube el mismo problema. Nuevo sello nuevo filtro nuevo aceite y quedó como nueva

@lloydflyhuntbc9923 2 ай бұрын

Could this be my issue??? My gears work in 4x4 but nothing in 2wd

@IgorjonesFurtado Жыл бұрын

I have a 2500 diesel, and no matter what position you put the lever in, the truck won't move. sometimes he tries for a few feet.

@nicholastetreault1373 2 жыл бұрын

Ross dillard just had this happen to me today. Driving on highway hit a pot hole lost all power .engine reved .goes in gear makes whirring noise .gonna find out tomorrow. Hope this is the case .any other advice is welcome

@samperez562 2 жыл бұрын

Same happened to me. Did it work for you?

@khalebjoseph871 Жыл бұрын

Did it work?

@EverythingOffRoadOfficial 7 ай бұрын

Did it work

@logangibson3002 Жыл бұрын

Is this the same style of transmission in a 05 Durango? My Durango just randomly lost all gears. No warning no nothing

@KaisTheFireWarrior Жыл бұрын

Fixed it?

@jesusqaz00 6 ай бұрын

Hi Logang, Did you ever find the issue?

@joseesqueda3930 Жыл бұрын

My truck I put in in reverse n it doesn’t move n I put it on natural n it goes forward but does get the gear right

@Luis-lr3li 3 жыл бұрын

I replaced my oil Ana filter today….. still Same issue. However, do I need to “hammer” that in there? I presented and that was it. Should I take the pan down again and really push it in?

@franciscoj1446 2 жыл бұрын

Hey i just pushed it in

@KaisTheFireWarrior Жыл бұрын

Hammer it

@martinmm89 3 жыл бұрын

Did that help your situation? I have the same exact problem and will change that tomorrow.

@rossdillard9886 3 жыл бұрын

Yes, This was 100% the issue. Not enough pressure for converter to perform its job. Local shop tried to get me to replace the transmission without even taking a look!!

@staceycarlson7674 3 жыл бұрын

Can anyone help a girl...shit! No shops open today

@zackablett2918 2 жыл бұрын

Well I just bought a 04 dodge ram 1500 with the 3.7l from a buddy because his wife was driving it and just randomly lost all gears but it ran fine before that sooo this might be the issue if so best 400$ I ever spent

@edgargarcia7650 2 жыл бұрын

Did it work?!

@zackablett2918 2 жыл бұрын

@@edgargarcia7650 it did not unfortunately. Thinking it's the torque converter but found a trans with only 40k with a torque converter so gunna just get that

@devonpiper5342 10 ай бұрын

Hopefully that’s what wrong with mine. Just currently shit it off and went to start it then acted like all neutrals

@EverythingOffRoadOfficial 7 ай бұрын

Was that the case

@josephmitchell8283 Жыл бұрын

Is that the 545RFE??

@KaisTheFireWarrior Жыл бұрын

Yes

@brandonlove9475 3 жыл бұрын

My 4wd neutral light came on solid and won't go out or engage gears. Any knowledge on this?

@alexseitz4972 2 жыл бұрын

My brother-in-law's truck has been having the same exact issue as the video subscriber has posted while reading through multiple forums I gathered that there is a small reset button next to your neutral light that should help reset it so you can then put it back into a gear from what I gathered as of now your T case is in neutral

@brandonlove9475 2 жыл бұрын

@@alexseitz4972 yeah nothing worked. The transfer case shift motor burnt up so I removed it and manually put it in 2wd so I could get it home. I ended up driving it like that for a couple months. It was fine. New motor was $300. I put it on but started having issues again so the motor didn't just go, the root of the issue still exists. Either a sensor getting wet or the abs screwing up due to a loose wheel bearing. I have the new bearing but it's a pain in the ass to change. Have to pull the top ball joint and lay the spindle down to access the three bolts because the front axles are in the way