2005 Toyota Camry Torque Rod Motor Mount Replacement 2AZFE

No video

2005 Toyota Camry Torque Rod Motor Mount Replacement 2AZFE - Engine Shaking Fix

Рет қаралды 92,630

7 жыл бұрын

Make/Model: Toyota Camry
Year: 2005 (Generation 5, 2003-2006)
Engine: 2.4L Inline 4 - 2AZFE
Problem: There was a little bit of extra vibration when driving which seemed to be coming from the engine. Inspecting the mounts showed that the torque rod mount was weak.
Solution: Replace torque rod mount, ensuring it is tightened down to keep engine from rocking. Consider inspecting and replacing other motor mounts if needed.
Parts Used:
Motor mount (updated link) - amzn.to/47FqJI0
old link PowerTorque Mounts Torque Strut Mount (goo.gl/DFknBg)
- Part # B9148 - UPC # 13321233798
*Alternatively you can use Toyota Genuine OEM Part # 12363-0H050 (amzn.to/32qcgPH)
Tools Used:
- 14 mm ratchet (amzn.to/2lAzdyS)
- Gloves (optional)
Try Amazon Prime free for 30 days! - amzn.to/3pyVmtb
Students! Try Amazon Prime free for 6 months! - amzn.to/2KU0fOh
Get Amazon Prime at 50% off! - amzn.to/38DNMqj
Thanks for watching!
Disclaimer:
This video is for educational and informational purposes only. Khan XO assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use of this information is at your own risk.
As an Amazon Associate I earn from qualifying purchases. All Amazon links are affiliate links from which I earn a small commission.

Пікірлер: 80

@clavear1 5 жыл бұрын

Thank you sir, you saved me over $150. Bought my part at amazon and did it myself thanks to you.

@saavedramarcelo 4 жыл бұрын

Over $150? Where did you get that estimate?

@TaijiArban 4 жыл бұрын

@@saavedramarcelo dealership or fraud mechanics... Pretty common to see those nowadays.

@Korboo 3 жыл бұрын

a mechanic offered me around the same amount. $140 or so. Only spent $23 to install it myself instead

@tessalaws9719 2 жыл бұрын

@@Korboo geez I'd only charge someone $20 in labor due to it being this easy..... Also they'd have to buy there own part but I'd do it myself for them.

@NicknamedSin 6 жыл бұрын

I have to replace the same thing on my lady's car. Pretty straight forward, it seems. Now I know. Thanks for sharing.

@khan_xo 6 жыл бұрын

Yup, about 5 minutes max! Thanks for watching!

@f_destroyer368 Жыл бұрын

Mine just gave out today and I was so mad because I thought it would be a super expensive part but this will help me a lot.

@sntruck 4 жыл бұрын

Be sure to change all 4 motor mounts, And make sure not to buy cheap low price motor mounts. After replacing all 4 of them you will steal feel the shaking and knocking vibration, Because of the low quality rubber that it is made out of. So do yourself a favor and pay for the good ones and do it right the 1st time

@Brian-vk6tz 3 жыл бұрын

Thank you for saving me money n a trip to a garage...for real..thank you kind sir

@kneebarx 6 жыл бұрын

If you need to change the other lower motor mounts just look up how to change the control arm because the motor mount is blocking the control arms

@livinnlaffn3818 3 жыл бұрын

You just saved my life buddy...My serpentine belt had broken as well.

@khan_xo 3 жыл бұрын

Two birds one stone, nice

@firstlast--- 3 жыл бұрын

Pro tip on these torque mounts, rock auto doesn't list them directly. Find the oem part number, paste it into rock auto and the torque mounts show up. 15 dollars before shipping for a new mount compared to $100+ for oem

@sweathe3819 5 жыл бұрын

Great video, but... If your holes don't line up, you are in for a long day! To line up the holes, you have to use pry bars (I hear) and move the motor around. I finally put the old, worn out one back in and will wait for a better day to try again.

@khan_xo 5 жыл бұрын

S Weathe make sure you’re parked on a level surface. The slightest incline/decline can cause the engine to lean and your holes won’t line up.

@SS-gj4dt 2 жыл бұрын

This is the first video the literally helped me figure out my problem in 5 mins. Thanks!!

@juliusemperor907 3 жыл бұрын

Very very useful, thank you!

@johnrackley1903 4 жыл бұрын

Thanks for the video, pretty straight forward.

@mandjevoevo2496 3 жыл бұрын

Thanks for video mate👍👏💪💪 Thanks for sharing 👍👍👍👏

@ddk80 3 жыл бұрын

Thanks for the great video. Haynes manual shows 47ft lbs for the torque specs. Is it me, or does that seem like a lot?

@APerez89 2 жыл бұрын

Wearing sandals doing car work? You're good bro!

@TheDcrocks1 5 жыл бұрын

Did you ever figure out the torque specs for the bolts?

@CSsuckDk 5 жыл бұрын

Thank you

@jacoboreyes5340 8 ай бұрын

Awesome. Easy fix

@timberhills1778 Жыл бұрын

Thank You

@agogefoundationrepair 5 жыл бұрын

Thanks for the video

@HiFiGuy197 4 жыл бұрын

I saw on a forum that you should tighten the bolts to 47 ft-lb.

@KarlenBell 4 жыл бұрын

Do not do that. I did it, and it broke my bolt in half.

@finnblu3002 5 жыл бұрын

Mileage at time of replacement

@kneebarx 6 жыл бұрын

Why does every video show the easiest motor mount to change what about the other three motor mounts

@kneebarx 4 жыл бұрын

haha not unless the owner ignored that mount for a long time

@kneebarx 4 жыл бұрын

Loyal Royalty after trying all sorts of after market mounts i ended putting the old mounts back in which still worked well

@Saint_Jamezzz 2 жыл бұрын

Thank you!!!! Jiffy Lube just lost $175 lol

@truthbaetold 3 жыл бұрын

My spacers are worn. Do they sell those online???

@Rafa-mw6ob 3 жыл бұрын

Good video thanks how much does that part cost ?

@khan_xo 3 жыл бұрын

At the time, about 60 bucks plus tax. Seems to have gone up a bit now but then again, so has everything lol

@stevedyer5902 10 ай бұрын

Sept 2023, Amazon, TRQ Brand, $35

@yoboiavetv5865 Жыл бұрын

Does the lower engine mount for this car that boost it up go with a 14 milliliter screw also ?

@khan_xo Жыл бұрын

Yes I believe they are all 14mm

@Dave0071 2 жыл бұрын

How? many miles did your Toyota Camry have when you replaced that torque mount.. because I want to replace the same motor mount but I want to be sure that it's necessary

@frincon75 2 жыл бұрын

Inspect the mount and look for torn and dried rubber, or have someone get into your car and shift it from park to drive, reverse,while you watch the mount shift.

@ryanm634 5 жыл бұрын

trying to remove the torque strut mount on my 2004 camry. There are two 14mm bolts the top most bolt is stuck and i gave up using a breaker bar when the socket slipped off twice out of fear of rounding the bolt. I dont own a impact wrench any suggestions on getting this bolt loosened? I have coated the bolt in break free bolt spray and liquid. If I can avoid buying an impact wrench that'd be great but if you think that'll do it let me know... Thanks everyone!

@khan_xo 5 жыл бұрын

Ryan Hoch try a bolt extractor socket: www.harborfreight.com/9-pc-38-in-drive-metric-bolt-extractor-socket-set-67894.html Had to use one in my Camry alternator video

@sweathe3819 5 жыл бұрын

I used PB blaster and a breaker bar. I went real, real easy on it.

@frincon75 2 жыл бұрын

Old saying, "cant be stuck if its liquid". Spray with PB blaster and heat it with a torch then try, last ditch effort is a cheater bar.

@juliusemperor907 3 жыл бұрын

So this part is gone bad in my 2005 camry the rubber is chipped off, the engine vibrates when i accelerate, would this have anything to do with it?

@finesse9892 3 жыл бұрын

Everything to do with it id say

@juliusemperor907 3 жыл бұрын

@@finesse9892 Fixed, thank you.!

@tammymarie55 4 жыл бұрын

Would this also work on A 2010 Toyota Highlander?

@khan_xo 4 жыл бұрын

eiramymmat 55 possibly if you have the I4 engine. I know for sure it’s similar on the 03-05 highlander. The part used would be different from the one for the Camry of course.

@tammymarie55 4 жыл бұрын

Khan XO ok. Thank you!

@shazbazzy 2 жыл бұрын

Did this issue cause the check engine light to go on ? Before u fixed it of course

@khan_xo 2 жыл бұрын

no just felt a lot of shaking when driving but no check engine light

@Mixfuns0 6 жыл бұрын

How can I know if the other mounts were bad?

@khan_xo 6 жыл бұрын

Muhammed Zahid if you change this one and still feel significant shaking or vibrations then the engine mount could be bad. You could also check visually for looseness or cracking if you are okay with getting under the car.

@mohammadabid1222 6 жыл бұрын

Did it solve your problem

@khan_xo 6 жыл бұрын

mohammadabid1222 Yes this helped prevent additional vibration and shaking that could be heard when driving

@iwizzz_3212 2 жыл бұрын

how do i jack the moter ?

@greatestcity19 13 күн бұрын

you dont actually JACk it, just put the jack right up against the passenger side of the oil pan. dont lift it, just get it in position so it doesnt fall

@Ricki126 5 жыл бұрын

Have to replace mine car only has 83,000 miles and the engine thuds when i shift

@XxChuyoxX 5 жыл бұрын

Ricardo Reyes My 2017 Camry has 27k miles and I had to replace it. All OE motor mounts are pretty cheap and never hold up.

@saulsanchez8710 2 жыл бұрын

Fucking thank you!

@Comfy_Snorlax 6 жыл бұрын

Did your car have a knocking sound when on the gas or coming over bumps? lol

@khan_xo 6 жыл бұрын

Reyes351 geez... nope haha

@kelseyrainwater3918 3 жыл бұрын

Mine dose when goim up bumps

@AtomicBlueJay 6 жыл бұрын

do you need to replace transmission mounts aswell?

@khan_xo 6 жыл бұрын

typically, it's good to inspect all mounts and replace them together. The idea is that if one is bad, the others had to carry its load until it was replaced. I didn't for this car since it wasn't the main issue for shaking in my car.

@AtomicBlueJay 6 жыл бұрын

Khan XO what was your other problems causing shaking

@khan_xo 6 жыл бұрын

in my case, there was oil getting in the spark plug well. Check out my valve cover gasket video for the fix on that if needed!

@pitdawg6418 5 жыл бұрын

Your actually supposed to replace ALL the mounts. It's like when you get new tires. Why replace just 1 and not the other 3 at the same time cause if 1 is worn out the other 3 are too

@Mixfuns0 5 жыл бұрын

I have changed it with a new one but surprisingly the engine shakes more after idk why!

@khan_xo 5 жыл бұрын

Muhammed Zahid make sure to inspect the new one to see if you notice any faults. Also be sure that it is tightened properly. Beyond visual inspection, violent shaking may be caused by something else. There is another engine mount at the bottom that may be blown. Or the engine could be shaking from something internal, such as oil getting into the spark plug well.

@Mixfuns0 5 жыл бұрын

Khan XO it shakes only when I shift like from P to R and when shifting gears

@Dexion845 5 жыл бұрын

@@Mixfuns0 Could be the front engine mount, thats usually the next one that goes. I just replaced all four of mine (automatics have 4, manual's have 5)... If you want to do it, don't get an aftermarket engine mount. You will have to loosen the 17mm bolt on the front mount using extensions, swivel socket adapter, etc. Also make sure the dogbone is disconnected up top (three 14mm bolts) Then go underneath and loosen the three 14mm nuts,... Take a block of wood and lift the engine under the oil pan as close to the front mount as possible and do the swap. After new one is installed lower the engine and align the 17mm bolt on the top.,, Then secure the three 14mm nuts underneath.

@tnt8583killer 3 жыл бұрын

did ur polyurethane instead of rubber mounts?