I Love The internet THANK YOU FOR UPLODING THIS MAN

A video 9 years ago came through clutch! Knowledge gained at KZfaq University 🙏🏾 Thank you for service 🫡

If you use a spark plug socket it should have a rubber washer on the inside that will grip the plug to remove it. You can also use a short piece of the appropriate size rubber hose to do this. Dropping the plug into the head can damage the threads on the head or the plug. I also recommend putting a small amount of anti-seize on the plug threads when you are installing steel plugs into aluminum heads, but be careful not to ove rtorque them or it can cause damage to the head.

thank you i must do this this week to my 2005 camry ( god bless you ) you are very kind

Great tip on using the coil to get the plug out, but you should use it to put the new plug in gently. Thanks for the video.

I have the exact same car and need both of those replaced as we speak this was a two-for-one thank you.

Great video, thanks so much. I like your use of the coil. I will try that for installing the spark plugs so that I don't drop them into the channel. Cheers

Thank uou. Just what I was looking for!

If you use a "Spark Plug 5/8" socket it makes it so much easier and there is less chance of ruining the threads. I would never, ever just drop the plugs into the hole, it could change the gap and ruin the threads. The rest of the video is pretty.

Thank you for posting this video

Perfect job and well explained

Good video, thanks!!

Thanks for showing...

Cool video ... Those r very popular engines .... Can u make a series on the 07 and up Honda crv? Or the 2.4 k motor in the Hondas ? Thank u

Awesome 😀 😀 2005 Toyota Camry 25L review.

dropping them in the tubes is not very smart...that's a good way to screw up the gap on the plugs or completely close them

Excellent, thank you

thank u

very good video!

I have a 2005 Toyota Camry XLE V6. Is it the same directions for the XLE V6?

You do not drop the spark plugs in the hole

The connectors on my 2005 Camry XLE have little latches that came off when I pressed them and couldn't seem to remove the connectors otherwise. Now not sure how to put them back, since this was not covered.

Too tight... Good video 4 bigginers

SPASIBO LEXA

when you said 5-8, do you mean 5/8?

Was that a cat meowing at 2:53??

No anti seize needed?

Someone give this man some sunblock

The way you placed the spark plugs back in are totally wrong and you run the risk of cross threading

thumbs down because i cracked my plastic cover because he didnt show the steps to removing the rubber piece on the back of the cover.

Excellent, thank you