LOL a Nissan dealer just quoted me $400 to change out that engine torque mount! I'm off to buy the part myself and a $20 breaker bar.

+Susie Stewart you can replace the part as shown in the video without supporting the engine. The mount you are replacing does not hold the engine up. It helps resist the motion of the engine rocking backwards and forwards as the gas pedal is depressed. The mount directly underneath the one replaced in the video does require additional support to replaced it. Happy Motoring!

Thanks for taking the time to make this video. I was told i needed to get them all replaced, but it's only the top one that's broken, so now I can do it myself (and save a few hundred $)

I bought this part at Auto parts warehouse last week for $22.00, and I just installed right now. I needed a breaker bar to get the 18 mm sockets off, but I sprayed WD 40 in advance on the bolts, but I got confused which side is the right side to mount because there is no real distinction, so I noticed the top of the torque mount has a longer piece of metal on it that goes on the top not the bottom according to this video. I have worked or cars a lot past 20 years here and there, and I notices with a half inch wrench the bolts did not want to come off easily, so I think they bolts should be tight, but I don't know the foot pounds would be nice took 5 minutes and no lifting the engine thank God Good luck all you tubers.

very user friendly and straightforward and direct to the job.good job Revit Auto.thank you, it saves me money.

Thank you for being so simple and straight forward !!

thank you for this one, 2nd video, the 1st one the guy was not behaving with the video, and didn't show anything, you were very explicit in your explanation and simple and direct. appreciate it.

Thank you so much for the video. This helped me out so much. I now have the confidence to go through with the swap 🙏 😁

Thanks, it worked great on my 2008 versa.

Wow that’s amazing! Thank you so much! I desperately need to change mine because the engine shakes sooo much! Was shown by a salesperson that it’s easy!

Thank you for posting this video. Great information!

Thanks for the video, I'm about to do this myself. If it helps anyone, it looks like these should be torqued to 103 ft/lbs

this video saved me a bunch of MONEY!!!! Thank you!

Wow ...that was easy. Thanks for the video tutorial.

thank you for your time, this video helped me a lot....

Ha. My mechanic wanted $400 for this job. Bought the OEM mount for $75. Thank you

Awesome thanks mate, straight forward and to the point. Easy 😅

thanks for this video , I had no idea this was even broke til changing motor oil , and there is was ! Torn , up!

I like your video. My car has the same exact broken mount. I have the part. Your video doesn't show or specify if I need to jack up the car and have a wood block under the engine. Do I need to do that? Or can I just do it the way your video shows?

great video man it really help me a lot ¡¡¡

For the side bolt do you lossen it by cranking the wrench up or down

Thank you, glad to know i can do it myself

Thanks for making the video, heading off to change it on my car

thank you sir i really appriciat your help 🥰🙏🙏

Shalom (peace) hey on tha old part there was a round piece on tha front i believe called a mount damper, what is that for cause mine just broke off? Plus i noticed on tha new part you replaced it with didn't have it.

What about the screw in the front mine came off this morning and landed on alternator belt...does that have to be tightened

Thanks for the great video! Do you have to jack the car under the oil pan ? Or can you do it without on a flat road surface? I'm planning on repairing this for my sister next week.

Aweseme video 🤘

Thanks- Just about to do it in the next week or so. .

Dude thanks so much!

Good solid video.

I love the NBA stars in the background.

Had a Menikie shop just quote me $334 for the top and bottom mount I brought it in because I thought it was something with the front end or axle. I timed you from start to finish. About 3 Minutes 13 seconds WTF Menikie. Its going to take me longer to set up the jack and get my tools out than to fix both mounts All the parts on Amazon $54. THANK YOU FOR MAKING THE VIDEO!!

nissan dealer wants $240 for this. thanks a ton for this video

Cool video.

+RevitAuto Have you ever done the lower engine mount do you have a video on how to do it?

I definitely need to replace the torque mount. But I'm wondering if the issue I'm currently having is a result of the worn out mount. Currently, my car's engine shakes when idling in drive or when I take off from idling at a light. In neutral, the shaking is less apparent. My question to you is, is this a result from the torque mount?

Did your part come with the counter weight? Mine came with one and a jam nut, which came loose within a week. I found it roadside and replaced it using thread lock and jam nut. It has stayed in place long enough for me to have to do the job again. The first replacement lasted four years. Good video.

Was looking in my engine and seen the top passenger side engine mount was broken. This seems easy enough only 2 bolts. I assume that this top engine mount just stabilizes the engine when it accelerates and does not hold much weight. I think this might fix my excessive vibration problem in my versa when I accelerate, thanks.

Thank you very much

Good job!!

There are two of these. This one, on top and easy to swap, is one. The second one is on the bottom of the engine. I decided to just replace the top , easy, one & skip the lower one, underneath the engine that is difficult to remove. Well, my new upper one did not live 8 months when it tore. If you are considering this, take it to an Asian car shop where they can replace both. Peace.

thx man!!

Is there anything holding the engine?

Gracias por el video

I just spent a couple of hundred dollars and 7 hours at a garage trying to figure out what was causing a rattling noise when going over rough road (which in New York City is 90% of all road). Of course...after replacing sway arms, strut mounts, doing the brakes because why not while you're in there...we realized it was after cracked motor mount. jeez I wish I saw this video before this morning.

Fantastic. Need to do this on my 2009. Engine doesn’t need to be supported? Any idea where to buy it cheap?

Anybody know what the purpose of that round rubber stopper toward the front of this part is for. his old one has it. The new does not even tho it has the threaded hole for it.

doesn't need to lift the engine with a jack under the oil pan?

thanks for the video, the bolts on my car are 17mm. my breaker is a small one. is there any suggestion you can give me on how to loosen the bolt? is it easier to loosen it when the engine is cold ?

thanks for the video, but i've got a problem. got bolts off, but one toward the back won't tighten, it just spins. thoughts? thank you.

Do you have to jack the engine to level it before you change it or do you just go right into it!

"NBA All Stars in the background" what a amazingly polite way to say your in the hood LMAO

Excellent

Thank you.

Awesome... car failed inspection for this part. Shop quoted me $174 to fix it... got the part for $17 and outside of it being in the teens outside.... EASY fix.

😀Thanks for watching. More Versa videos and other playlist here. 2006-2013 Nissan Versa Muffler Replacement kzfaq.info/get/bejne/mrOipqt-u6yqoGw.html Tool reviews kzfaq.info/sun/PLtBQoslDKn54i7x-W7hhPWt4zchApL0Mi Scan Tools kzfaq.info/sun/PLtBQoslDKn54Q8nFOMrtnt5V0dveKcBqy

The torque thrust mount you removed had a harmonic damper, but the new one did not. Is that a separate part?

Do you need to use a torque wrench for this job or is it enough to just tighten it up?

You don't need a jack?

Where would be the best place to get the part?

I just got a Nissan Versa 2012, and I was told by dealer $300.00, but I can replace myself if don't have to lift or support motor except comment below stated don't have to support motor what about when replacing top motor mount not torque motor mount.

What tools do I need to do it I already have the part

Torque specs?

so how many mounts are there completely

did you use oem or after market?

so there only the 1 ENGINE mount? and also on the transmission? is there one there too

I snap the top bolt is it easy to get out

That new part is missing the harmonic balancer!

What are the torque specs?

Could a broken motor mount make u lose power in ur car

This causes car to vibrate when driving?

There wasn't a versa in 2006?

1.6 or 1.8 ? ? ?

Our neighbors Nissan Versa needs new motor mounts, it’s a 2013 and the shop gave her a quote of $825. Can someone tell me if that’s fair?

motor point

Good stuff! Just fyi, they @ Jiffy Lube wanted to charge me 162.40 for the part and labor, just a heads up

motor point aglaiment fitin fiter

kit tul