2007-2021 Toyota Tundra Roof Drip Molding Installation

Рет қаралды 55,320

Жыл бұрын

Very short video on how to install the drip molding on the roof of your Toyota Tundra. It's really easy. Make sure you get the correct part. They are side-specific. This one was for a 2016 CrewMax cab, passenger side.
Google these parts:
Passenger (right side) Part - 75551-0C060
Driver (left side) Part - 75552-0C060

Пікірлер: 86

@cheezeballcity Жыл бұрын

Thanks for this video! Totally what I was looking for and with great instructions!

@DadDoingStuff Жыл бұрын

Happy to help out!

@d.mar.2624 Жыл бұрын

Thanks for uploading this video. I have to do it for my 2012 Ram 1500. It came off after I ran it through the drive through carwash. I wasn't even upset about it. The truck is 11 years old. I figure any adhesive that's on it would probably start wearing away by now.

@DadDoingStuff Жыл бұрын

11yrs is a long time for these pieces. Happy to help and thanks for the comment!

@JorgeRamirez-bn5gs 7 ай бұрын

Thank you this is really helpful

@DadDoingStuff 7 ай бұрын

You're welcome! Happy to help!

@user-eb6ld4el2r 10 ай бұрын

Thanks for the video! I have a CH-R with the same problem.

@DadDoingStuff 10 ай бұрын

Happy to help out!

@bigsteve7857 Жыл бұрын

this must be a real common problem......just bought a 2017 tundra with drip molding missing on passenger side....thank you for video

@DadDoingStuff Жыл бұрын

Glad to help Steve! Yeah seems like these drip moldings weren’t entirely thought out well.

@kortneybailey5544 9 ай бұрын

Thanks for the video. I just bought a 2019 mitsubishi outlander, and that bad boy was flapping in the wind after i left the car wash.😂

@DadDoingStuff 9 ай бұрын

LOL! Yeah the car wash is culprit #1 every time!

@mattclark5480 Жыл бұрын

Thanks for the video Same problem here Passenger side is gone on my platinum crew max

@DadDoingStuff Жыл бұрын

They certainly don’t hang on super well. But luckily it’s a really easy fix! Cheers!

@robertcarton3686 4 ай бұрын

Great video, I cant seem to keep mine on though, have replaced with genuine Toyota parts. They still come off in a carwash, think this is a design flaw by Toyota and that double sided white sticky tape that is supposed to hold down the front end breaks down quickly. Definitely needs a better engineered solution. Was wondering if other 2020 Tundra owners were seeing same issue?

@DadDoingStuff 4 ай бұрын

I had one viewer say he used super glue to glue his down. No clue if that works, but might be worth a shot? 🤷🏻‍♂️

@DadDoingStuff 4 ай бұрын

Oh, and I noticed that the new gen Tundra (2022+) doesn’t have these rubber gutter strip things!

@Slam- Жыл бұрын

Had the same piece fly off my Lexus the other day

@DadDoingStuff Жыл бұрын

I love Toyota/Lexus but I struggle with why these come off so easily.

@1940restorod Жыл бұрын

I ended up using epoxy on the front of mine as it kept getting pulled off in car wash. Seems to be fine now.

@DadDoingStuff Жыл бұрын

Great idea!

@georgewhiplemyerjr.9165 8 ай бұрын

I have a 2019 Toyota tundra king cab. Besides appearances do I really have to replace the molding? Or is it really used for leak prevention? Thanks.

@THunt-ss4hy 8 ай бұрын

Looking at the drip molding on my Yaris, it looks only cosmetic to cover the channel. It doesn’t seal anything

@DadDoingStuff 8 ай бұрын

I don’t think it does anything for waterproofing. There’s a chance it helps with wind noise. But I’d say the biggest downside to not having it would be the aesthetics.

@TucsonDude 6 ай бұрын

Did you think of replacing the retaining clips? They're only $2 apiece, but I don't know how they attach to the roof a there's no adhesive.

@DadDoingStuff 6 ай бұрын

Never really paid much attention to those as they seemed to be attached just fine. Just really wished these trim strips were only $2!!

@thingshappen9199 4 ай бұрын

I paid $100 for a OEM set. Ridiculous.@@DadDoingStuff

@MrEdgarh1971 Ай бұрын

I added clear silicone along the part to glue it

@DadDoingStuff Ай бұрын

Probably a good call to help keep them in place!

@alanaho4915 6 ай бұрын

It took 7 years before i lost one. Hence watching this video. Question: Where do i find, besides Toyota, the back 6 inch corner piece?

@DadDoingStuff 6 ай бұрын

Not totally sure the best place to buy those, but you want to look for part 75553 (Right) and 75554 (Left/Driver). Those are the parts for those back corners.

@andyrai4662 6 ай бұрын

Do you think that the Roof molding is interchangeable with a tacoma?

@DadDoingStuff 5 ай бұрын

I highly doubt it. Sizes would be different.

@zz6761 9 ай бұрын

My 21 Sienna roof trim blowed off during car wash. Is it normal?

@DadDoingStuff 9 ай бұрын

Not sure it’s normal, it’s also not uncommon. Car washes (especially the ones with the super strong blow dryer at the end) are known to displace those roof trim pieces. I’ve lost one in the car wash before on my Tundra.

@tylerkopcik Жыл бұрын

Does this cause a water leak on the grab handle inside the vehicle for 07-13 dub cab? Trying to troubleshoot this problem

@DadDoingStuff Жыл бұрын

To my knowledge, no. I don't think this molding provides any type of protection from leaks. Sounds to me like you potentially have an issue with the rubber door seal itself, or possibly a leak somewhere on the edge of the windshield.

@Pads_to_groves Жыл бұрын

I have one have had this problem but I’ve taken that cover off and it opens almost directly into the inside of the a-pillar so possibly windshield side molding might not look bad but the glue could’ve separated somewhere or somethings of that nature or if not maybe it could’ve been not the best windshield installer if it’s been replaced

@alexanderfetuli8883 Жыл бұрын

@tylerrobert7784 I just got a leak at the same spot the grab door handle u ever figured it out?

@kirkhamster0024 Жыл бұрын

Water leak by the front grab handles on the 2nd gen sequoias and tundras with sunroof is a common issue. Root cause (95% of the time): sunroof drain lines are clogged up. These drain tubes run along the A-Pillar and water drains out under the vehicle behind the front wheels. To unclog the drain tube, open the sun roof. Drain holes are located at the front 2 corner of the sunroof. First, Clean up the area around the drain hole to remove debris, dirt, leaves, etc. Then, gently feed a weedwacker plastic string down the drain pipe to clear out the pipe. Please be careful during this process. Drain tubes are made out plastic. Lastly, pour water slowly over by the drain area of the sunroof to ensure water is properly draining out under the vehicle.

@michaeltierney2615 Жыл бұрын

Mine Flys off with the wind dryers at car wash. Idk what to do or just leave it off.

@DadDoingStuff Жыл бұрын

Now that I think about it, that might be exactly where I lost mine! Those dryers are worse than driving down the freeway for sure.

@michaeltierney2615 Жыл бұрын

@@DadDoingStuff, it flaps around outside my window when i go through it. they have a 2in double-sided tape in the front holding the whole thing down. thinking about putting double sided tape all way way to the back.

@jeremyziebart9216 Жыл бұрын

Mine are cracking. What is the link on item ? Thanks

@DadDoingStuff Жыл бұрын

Should be same for 2007-2021 Right side p/n is 75551-0C060 and left side p/n is 75552-0C060 Right - www.toyotapartsdeal.com/oem/toyota~moulding~roof~drip~side~finish~rh~75551-0c060.html?vin=&make=Toyota&model=Tundra&year=2016&submodel=&extra1=&extra2=&filter=(1=3URFE;4=SR5;7=CMAX;8=HTWC;9=S;0=USK51L-PSTSKA) Left - www.toyotapartsdeal.com/oem/toyota~moulding~roof~drip~side~finish~lh~75552-0c060.html?vin=&make=Toyota&model=Tundra&year=2016&submodel=&extra1=&extra2=&filter=(1=3URFE;4=SR5;7=CMAX;8=HTWC;9=S;0=USK51L-PSTSKA)&location=body/moulding,,75552 Hope this helps!

@underdoggrisingent.4322 3 ай бұрын

Did you have any leaking in the cab with it off during rain

@DadDoingStuff 3 ай бұрын

Nope. I don’t think it has any effect on keeping weather out. It honestly seems like it’s an ascetic thing. I think the newer 2022+ Tundras don’t even have these things……I think.

@healthyfreesoul 4 күн бұрын

Was told at a toyota dealership its cosmetic not for weather

@ramz1455 Жыл бұрын

Does the long and short molding leave a gap or do they meet?

@DadDoingStuff Жыл бұрын

There is a small gap towards the back where this piece meets the one coming up from the back corner. Not a big gap, but there is a little space there.

@ramz1455 Жыл бұрын

@@DadDoingStuff ah okay thank you. I have a Tundra 19' and I saw a dry water stain on my headlinee (rear driver side) close to the grab handle. I thought water was going thru that ggap.

@DadDoingStuff Жыл бұрын

I honestly don’t know how the drip molding would keep water out. It definitely doesn’t seem like it’s water tight in that channel. My guess is that isn’t the source of your leak, unless there is some kind of actual hole in that channel. I would think it’s the rubber door seal that’s leaking. Probably have to break out the hose for troubleshooting. If you do find the leak, I’d love to know what it is. Good luck!

@ramz1455 Жыл бұрын

@@DadDoingStuff Will troubleshoot during the weekend. Thank you DDS!

@pelon4374 Жыл бұрын

Are both the same 75551-0C060 both sides?

@DadDoingStuff Жыл бұрын

No. The driver side (left side) part is 75552-0C060. You can Google that part number and find several place that have it. Note that both of these are listed as be for a crewmax withOUT a sunroof. Hope that helps.

@pelon4374 Жыл бұрын

@@DadDoingStuff awesome your the best

@healthyfreesoul 4 күн бұрын

Re carwash, just ask attendant to tape down wherever it flaps off, or easiest to have your own tape.

@DadDoingStuff 3 күн бұрын

That’s a solid idea!

@healthyfreesoul 3 күн бұрын

@@DadDoingStuff And thanks for vid! Replacing strip on Prius this eve, when the heat lowers (S CA). Hopefully my clips will be intact.

@nateg2282 Жыл бұрын

What is the purpose of this roofcdrip molding?

@DadDoingStuff Жыл бұрын

To my knowledge, aesthetics. It’s definitely not a seal of any kind.

@thelivingstone2347 9 ай бұрын

Has anyone found a cheaper alternative to these drip moldings ( like another cars molding that fits ) they are $80 EACH! 😅

@DadDoingStuff 9 ай бұрын

LOL….maybe that’s where I keep losing them!

@grahamstewart79 8 ай бұрын

Toyota dealer here wants $175 - gah.

@DadDoingStuff 8 ай бұрын

I can’t fathom why these things cost so much. Ridiculous!

@donbee4873 7 ай бұрын

Just bought a set on Ebay for $30

@alanaho4915 6 ай бұрын

I bought mine on Amazon for around $30.

@robtaylor6638 5 ай бұрын

I watched to see if those channels could accommodate a “nut” plate to build a rack off of??

@DadDoingStuff 5 ай бұрын

Good question, but I’m not confident that they would….albeit, I’ve not seriously looked at anything like that.

@MrWeliz 7 ай бұрын

I used double sided tape on my 2017 Tacoma

@DadDoingStuff 7 ай бұрын

Awesome. What brand/style of tape?

@MrWeliz 7 ай бұрын

Gorilla double sided tape clear about 1" wide @@DadDoingStuff

@DadDoingStuff 7 ай бұрын

Very good tip! Thx for sharing!

@nedrat 5 ай бұрын

Will try the tape on my 2017 RAV4.

@MrWeliz 5 ай бұрын

Find the best one out therein make sure you put plenty , I skimped the first and second times and it came off the third time i put plenty and its still holding@@nedrat