2007 Chevy Cobalt EVAP Charcoal Canister Removal

Рет қаралды 17,911

3 жыл бұрын

Shows how to remove the charcoal/carbon canister for the EVAP system. Shows how to disconnect vacuum hoses and electrical connectors. Shows how to replace the Vent Solenoid valve. How to clean the filter inside the canister ahead of the Vent solenoid valve. P0446 DTC eventually fixed with a new Purge solenoid. See my video on the Purge Solenoid valve Replacement.
• 2007 Chevy Cobalt EVAP...
• Wells EVAP Training wi...

Пікірлер: 20

@jumpingmarioplushvideos4795 5 ай бұрын

Hey man I just wanted to comment and say this was an amazing video, the explanations, diagrams, and video all are great and unlike most car repair videos you actually show and explain how and where things go and work. Great informative video 👍

@xelaju8 3 жыл бұрын

I have a cobal 2009 had de same problem with the electrical conductors for the evap solenoid. Had to fix that along with the fuel line and evap line that goes to the purge solenoid. Thank you for the video very informative with details and pictures. Very much appreciated.

@ChrisBaccus Жыл бұрын

Thank you for this. Great tips on testing the canister and checking the filter. Plus it's super easy to remove and I didn't even have to lift the car. Found out my problem wasn't this thanks to your insights here.

@wscorners 2 жыл бұрын

This really helped with some of the connections I wasn't sure how to remove the hoses in particular from the canister appreciate that.

@googleuser868 2 жыл бұрын

I just removed mine to work on a fuel leak. The 10mm bolt twisted off. Fun times.

@darkshadowsx5949 2 жыл бұрын

my purge valve was clogged full of rust. what else should i look for?

@thethree300exriders Жыл бұрын

Will bad one cause my 2010 cobalt not to start? Just cranks only way I can get it to start is if I hold the peddle to the floor crank it then she might start runs but still bogs

@johnnyparkman7892 2 жыл бұрын

My 07 Yukon want crank by key pad could it be canister

@hissori2978 3 жыл бұрын

Dude thanks

@jkaleb20000 2 жыл бұрын

The two white parts on 3:16 of my car are broken 🥺 any solution

@miriamvivo4279 3 жыл бұрын

These evap systems on vehicles not easy to figure out. Had a tuf time with my 2006 subaru sti. Had a po 442 and 456 . Soved those 2 with my smoke machine autool sdt . Not so with po447 and 448 . Open circuit faulty pcm .$ 1800

@TheFruitingChamber 9 ай бұрын

one of my dang connecters 2 wires are frayed off flush ugh..... what a pain in the ass just the part wasnt a big deal but soldiering under my gas tank.... idk if i can do that shit

@jct300m 2 жыл бұрын

Very Good video!! Did this solve the P0446 code?? I have this code now on 2006 cobalt 2.2 ls.. How did yours turn out??

@jimdandy6472 2 жыл бұрын

No, mine came back, but I still felt the video had some good info. Someday I'll have my buddy with a fancy $2000 meter/tester run the diagnostics on it, but it still runs fine. Can't use the remote start on the FOB with a trouble code though.

@jct300m 2 жыл бұрын

@@jimdandy6472 Let me know if you find a solution for P0446..Thanks Jim!!

@saucecakes 2 жыл бұрын

@@jct300m Use a OBD 2 to run live data or get the 20 dollar dongle off amazon and connect it to your phone. Mine showed its like -4000 pressure. I just replaced the sensor and it worked. Reading online people were saying the sensors tend to be the first to go and show a P0446 on these cars.

@jct300m 2 жыл бұрын

@@saucecakes Which sensor??

@saucecakes 2 жыл бұрын

@@jct300m the fuel tank pressure sensor. (Part ACDelco 16238399)